2001 Toyota Highlander Owners Manual - Page 82

'01 HIGHLANDER_U (L/O 0106) Tilt steering wheel CHILD RESTRAINT INSTALLATION Type A- 1. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages below the tag in the seatback. 2. Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B- 1. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages below the tag in the seatback. 2. Latch the buckles onto the anchorages. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 79 in this section.) For the installation details, refer to the instruction manual equipped with each product. SYSTEM CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D After securing the child restraint system, never recline the seat. D Do not put a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. This can cause severe injury to the child and front passenger in case of sudden braking or a collision. To change the steering wheel angle, hold the steering wheel, push down the lock release lever, tilt the steering wheel to the desired angle and return the lever to its original position. 82 2001 MY HIGHLANDER_U (OM48432U)