2001 Toyota Sequoia Owners Manual - Page 100

01_SEQUOIA_U (L/O 0009) Cap CHILD RESTRAINT INSTALLATION Type A- SYSTEM Covers 1. Turn up the covers for left lower anchorage on the center position of the seats anchorages on the left side position of the seats, and remove the cap for the right lower anchorage of the center position of the seat as shown in the illustration. 2. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages below the tag and cap in the seat cushion. 3. Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B- 1. Turn up the covers for left lower anchorage on the center position of the seats anchorages on the left side of the position of the seat, and remove the cap for the right lower anchorage of the center position of the seat as shown in the illustration. 2. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages below the tag in the seat cushion. 3. Latch the buckles onto the anchorages. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 95 in this section.) For the installation details, refer to the instruction manual equipped with each product. Type B 100 2001 SEQUOIA (OM34414U)