2001 Toyota Sequoia Owners Manual - Page 102

01_SEQUOIA_U (L/O 0009) CHILD RESTRAINT INSTALLATION Type A- SYSTEM For the installation details, refer to the instruction manual equipped with each product. 1. Turn up the cover for lower anchorages of the right side position. 2. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages below the tag in the seat cushion. Cover CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. 3. Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B- 1. Turn up the cover for lower anchorages of the right side position. 2. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages below the tag in the seat cushion. 3. Latch the buckles onto the anchorages. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 97 in this section.) D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D When using lower anchorages for a child restraint system on seats, ensure that the moved to the rear −most with the seatback close to restraint system. the third seat is position, the child D After securing the child restraint system, never slide or recline the seat. Type B 102 2001 SEQUOIA (OM34414U)