2001 Toyota Sequoia Owners Manual - Page 252

01_SEQUOIA_U (L/O 0009) -Loosening wheel nuts -Positioning the jack Front Rear 4. Loosen all the wheel nuts. Always loosen the wheel nuts before raising the vehicle. Turn the wheel nuts turn counterclockwise to loosen. To get maximum leverage, fit the wrench to the nut so that the handle is on the right side, as shown above. Grab the wrench near the end of the handle and pull up on the handle. Be careful that the wrench does not slip off the nut. Do not remove the nuts yet-just unscrew them about one−half turn. 5. Position the jack at the correct jack point as shown. Make sure the jack is positioned on a level and solid place. JACK POINTS: Front-Under the frame side rail Rear-Under the rear axle housing Put a jack handle, jack handle extension and jack handle end together as shown in the illustration. 1 Jack handle end 2 Jack handle extension 3 Jack handle CAUTION Make sure they are each securely fixed with screws. 252 2001 SEQUOIA (OM34414U)