2001 Toyota Tacoma Owners Manual - Page 223

'01 Tacoma U (L/O 0009) -Lowering your vehicle 9. Lower the vehicle completely and tighten the wheel nuts. Regular cab models-Turn the jack handle counterclockwise to lower the vehicle. Xtra-cab and double cab models-Turn the jack handle extension counterclockwise with handle to lower the vehicle, making sure the handle remains firmly fitted onto the jack handle extension. Use only the wheel nut wrench and turn it clockwise to tighten the nuts. Do not use other tools or any additional leverage other than your hands, such as a hammer, pipe or your foot. Make sure the wrench is securely engaged over the nut. Tighten each nut a little at a time in the order shown. Repeat the process until all the nuts are tight. -Reinstalling wheel ornament Two-wheel drive models 10. Reinstall the wheel ornament. Put the wheel ornament into position and then tap it firmly with the side or heel of your hand to snap it into place. CAUTION CAUTION When lowering the vehicle, make sure all portions of your body and all other persons around will not be injured as the vehicle is lowered to the ground. Take due care in handling the ornament to avoid unexpected personal injury. Four-wheel drive models 2001 TACOMA (OM35766U) 231