2002 Toyota Sequoia Owners Manual - Page 17

02_SEQUOIA_U (L/O 0108) The timing for the automatic door lock function can be changed. For details, contact your Toyota dealer. If the "LOCK" or "UNLOCK" switch is kept pressed in, the locking or unlocking operation is not repeated. Release the button and then push again. The wireless door locking or unlocking function can be erased. For details, contact your Toyota dealer. SWITCHING BEEP SOUND ON AND OFF You can switch the beep on and off. (The beep is on initially and after battery replacement.) To switch the beep on and off: With the driver's door opened- 1. Insert the ignition key and remove it. 2. Within 5 seconds, insert the ignition key again and turn it to the "ON" position. 3. After 10 seconds, push the same "LOCK", "UNLOCK", "PANIC" switch or back window open button twice within 10 seconds. Two beep sounds inform you that the program has been switched on or off. If this procedure is not followed exactly, the beep will not operate as expected. Check the beep ON/OFF operation by pushing the transmitter switch after you finish this procedure. If the beep does not operate as expected, repeat this procedure from step 1. OPENING THE BACK WINDOW To open the back window, push the back window open switch of the transmitter for about 1 second. The window will fully open. At this time, you can hear a beep. If the ignition switch is in the "ON" position, the back window cannot be opened by the back window open switch. To open the back window with the master key, see "Power back window" on page 25 in this section. The back window opening program by wireless remote control can be changed or disabled. For details, contact your Toyota dealer. 2002 MY SEQUOIA_U (OM34418U) 17