2002 Toyota Sequoia Owners Manual - Page 235

02_SEQUOIA_U (L/O 0108) Total trailer weight Tongue load CAUTION D The hitch must be bolted securely to the vehicle frame and installed according to the hitch manufacturer's instructions. D The trailer cargo load should be distributed so that the tongue load is 9 to 11% of the total trailer weight, not exceeding the maximum load of the following. Never load the trailer with more weight in the back than in the front. About 60% of the trailer load should be in the front half of the trailer and the remaining 40% in the rear. Weight carrying hitch or distributing hitch Two−wheel drive models 281 kg (620 lb.) Four −wheel drive models 295 kg (650 lb.) HITCHES D The hitch ball and king pin should have a light coat of grease. D Toyota recommends removing the trailer hitch whenever you are not towing a trailer to reduce the possibility of additional damage caused by the hitch if your vehicle is struck from behind. After removing the hitch, seal any mounting holes in the vehicle body to prevent entry of pollutants such as exhaust fumes, dirt, water, etc. Tongue load Total trailer weight 100 = 9 to 11% NOTICE Do not use axle−mounted hitches as they can cause damage to the axle housing, wheel bearings, wheels or tires. Also, never install a hitch which may interfere with the normal function of an Energy Absorbing Bumper, if so equipped. D If you wish to install a trailer hitch, you should consult with your Toyota dealer. D Use only a hitch recommended by the hitch manufacturer and the one which conforms to the total trailer weight requirement. 2002 MY SEQUOIA_U (OM34418U) 235