2003 Toyota Sequoia Owners Manual - Page 189

03_SEQUOIA_U (L/O 0209) -Headphone input jacks z Be careful not to bend the electrode of the controller battery insertion and that dust or oil does not adhere to the transmitter case. z Close the battery case securely. After replacing the battery, check that the controller operates properly. If the controller still does not operate properly, contact your Toyota dealer. 2. Remove the discharged battery. 3. Put in a new battery with the positive (+) side up. Put in the case securely. You can enjoy the rear seat audio system with commercial headphone. To use the headphones, connect them to the jack. The key must be in the "ACC" or "ON" position. NOTICE z Make sure that the positive side of the controller battery is facing correctly. z Do not replace the battery with wet hands. Water may cause rust. z Do not touch or move any components inside of the controller, or it may interfere with proper operation. 2003 SEQUOIA from. Sep. '02 Prod. (OM34420U) 189