2003 Toyota Sequoia Owners Manual - Page 650

03_SEQUOIA_U (L/O 0301) 2. Bi −level-Air flows from both the floor vents and the instrument panel vents. When you set the temperature selector setting at about the middle in automatic operation, warm air flows out of the floor vents and relatively low−temperature air flows out of the center and side vents. 3. Floor-Air flows mainly from the floor vents. It is recommended that you close the lower vent. For details about this, see "Instrument panel vents" on page 249 in this section. 4. Floor/Windshield-Air flows mainly from the floor vents and windshield vents. Use with the air intake selector positioned in FRESH. It is recommended that you close the lower vent. For details about this, see "Instrument panel vents" on page 249 in this section. For details about air flow selector settings, see "-Air flow selector settings" described below. It is recommended that you close the lower vent. For details about this, see "Instrument panel vents" on page 249 in this section. For details about air flow selector settings, see "-Air flow selector settings" described below. For further information for removing frost and fog, see "Instrument panel vents" on page 249 in this section. Windshield air flow button When this button is pressed, air flows mainly from the windshield vents. Pressing the button once again returns the air flow mode to the last one used. This button allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air intake selector button once again. Press the "A/C" button for dehumidified heating or cooling. This setting clears the front view more quickly. 244 2003 SEQUOIA from Jan. '03 Prod. (OM34422U)