2003 Toyota Sequoia Warranty, Maitenance, Services Guide - Page 24

Explanation of Maintenance Items Propeller Shaft Lubricate the propeller shaft spiders and slide yokes with lithium-base chassis grease and the double cardan joint with molybdenum-disulfide lithium-base chassis grease, and re-torque the bolt. Only a qualified technician should re-torque the bolt. Radiator Core and Condenser Inspect for debris and signs of damage. Have any problem repaired immediately by a qualified technician. Spark Plugs Replace at specified intervals. Install new plugs of the same type as originally equipped. A qualified technician should perform this operation. Steering Gear Box Inspect for signs of leakage. If you discover any leakage, have it repaired immediately by a qualified technician. Steering Linkage and Boots With the vehicle stopped, check for excessive freeplay in the steering wheel. Inspect the linkage for bending and damage and the dust boots for deterioration, cracks and damage. Replace any damaged parts. A qualified technician should perform these operations. Timing Belt Replace every 90,000 miles. A qualified technician should perform this operation. Tire Rotation Tires should be rotated according to the instructions in the Owner's Manual. When rotating tires, check for damage and uneven wear. Replace if necessary. Transfer Case Oil Replace at specified intervals. When performing inspections, check for signs of leakage. If you discover any leakage, have it repaired by a qualified technician immediately. Wheel Bearing and Drive Shaft Bearing Grease Repack the wheel bearings with wheel bearing grease and the front drive shaft bearings with molybdenum-disulfide lithium-base chassis grease. A qualified technician should perform these operations. General Maintenance Information 21