2003 Toyota Tacoma Owners Manual - Page 232

'03 Tacoma U (L/O 0209) -Loosening wheel nuts CAUTION Never use oil or grease on the bolts or nuts. The nuts may loose and the wheels may fall off, which could cause a serious accident. -Positioning the jack Front Rear 4. Loosen all the wheel nuts. Always loosen the wheel nuts before raising the vehicle. Turn the wheel nuts counterclockwise to loosen. To get maximum leverage, fit the wrench to the nut so that the handle is on the right side, as shown above. Grab the wrench near the end of the handle and pull up on the handle. Be careful that the wrench does not slip off the nut. Do not remove the nuts yet-just unscrew them about one-half turn. Two-wheel Runner drive models except Pre Front Rear Four-wheel drive models and Pre Runner 232 2003 MY TACOMA (OM35800U)