2004 Toyota Avalon Navigation Manual - Page 169

'04 AVALON U (L/O 0408) Driving position memory system The micro computer can memorize the position of the driver's seat and outside rear view mirror. Two different driving position profiles can be entered into computer's memory. Recording a driving position in the computer's memory can only be done when the ignition key is in the "ON" position and the automatic transmission selector lever is in the "P" position. To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2 above. SETTING THE DRIVING POSITION 1. Adjust the driver's seat and outside rear view mirror to the desired position. 2. While pushing the "SET" button, push button "1" or "2" until the signal beeps. The beep sound means that the positions are recorded in the computer's memory. By repeating these two steps and pressing the remaining button, the driving position for another driver can be recorded. To set a new memorized position, select the desired position and perform step 2. The previous memory will be erased and a new position will be set. 46 2004 AVALON from Aug. '04 Prod. (OM41412U)