2004 Toyota Matrix Owners Manual - Page 127

'04 MATRIX_U (L/O 0307) Error messages If the player malfunctions, your audio system will display the following error messages. "TIGHT TAPE": This message is displayed when the tape is tight and the player cannot turn the tape hubs. Remove the tape. Hold the tape with the open end down and try to turn the right hub counterclockwise with a pencil. Turn the tape over and repeat. If the hubs do not turn easily, your tape may be damaged and should not be used in the player. Try a new tape to make sure your player is working properly. "BROKEN TAPE": This message is displayed when the tape is broken. Try a new tape. "CLEAN PLAYER": This message is displayed when the cassette tape player need to be cleaned. It will still play tapes, but you should clean it as soon as possible to prevent damage to the tapes and player. After cleaning the player, push and hold the cassette tape eject button until you hear a beep. "CLEANED" will appear on the display. "WRAPPED TAPE": This message is displayed when the tape is wrapped around the tape head. Attempt to get the cassette out. Try a new tape. If malfunction is not rectified, take your vehicle to your Toyota dealer. Cut tape bypass function When you use the endless type tape (head cleaner tape etc.), you must deactivate the tape bypass feature. To deactivate this feature: 1. Turn the ignition key to the "ACC" or "ON" position, and the audio is off. 2. Push and hold the "TAPE/CD" button for more than two seconds. "READY" will appear on the display. 3. Insert the endless type tape. The tape bypass feature will stay deactivated until the cassette tape eject button is pushed. TONE (Manual tone adjustment function) Push the "TONE" button to select the bass, midrange or treble tone control position. ("BASS", "MID", "TREB" will appear on the display.) To adjust the tone, turn "TUNE/SELECT" knob. "BASS": Adjusts low−pitched tones. The display ranges from −6 to +6. "MID": Adjusts mid−pithed tones. The display ranges from −6 to +6. "TREB": Adjusts high−pitched tones. The display ranges from −6 to +6. To adjusts all of the tone controls to the middle position, push and hold the "TONE" button for more than two seconds. "FLAT" will appear on the display. 127 2004 MATRIX from Oct. '03 Prod. (OM12861U)