2004 Toyota Sequoia Owners Manual - Page 341

04_SEQUOIA_U (L/O 0309) -Reinstalling wheel ornament 10.Reinstall the wheel ornament. Put the wheel ornament into position and then tap it firmly with the side or heel of your hand to snap it into place. CAUTION Take due care in handling the ornament to avoid unexpected personal injury. -After changing wheels 11. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designated on page 402 in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible. 12.Restow all the tools, jack and flat tire securely. With a spare tire of the same wheel type as the installed tires- As soon after changing wheels as possible, tighten the wheel nuts to the torque specified on page 402 in Section 8 with a torque wrench. Have a technician repair the flat tire. Type A Type B 341 2004 SEQUOIA from Sep. '03 Prod. (OM34423U)