2004 Toyota Solara Navigation Manual - Page 137

BASIC FUNCTIONS Display operation CAUTION Take care not to jam your hand while the display is moving. Otherwise, you could be injured. Touch switch operation This system is operated mainly by the switches on the screen. To prevent damage to the screen, lightly touch switches on the screen with your finger. When you touch a switch on the screen, a beep sounds. Do not use objects other than your finger to touch the screen. 1U009 NOTICE Do not obstruct the display while it is moving. It could damage your navigation system. INFORMATION D If the system does not respond to a touch of a switch, move your finger away from the screen and then touch it again. D You cannot switches. You can adjust the angle of the display by pushing the "TILT" button. Each push of the "TILT" button will tilt the display to positions 1 , 2 , 3 and then back to 0 in the reverse order. If you turn the ignition switch off, the display will automatically move back to position 0 . The display will automatically resume the previous position when the ignition switch is turned to the "ACC" or "ON" position. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. operate dimmed D Wipe off fingerprints on the surface of the display using a glass cleaning cloth. D The displayed image may become darker and moving images may be slightly distorted when the display is cold. D Under extremely cold conditions, the map may not be displayed and the data input by a user may be deleted. Also, the switches may be harder than usual to depress. 2