2005 Toyota Highlander Owners Manual - Page 166

'05 HIGHLANDER_U (L/O 0409) If you need acceleration-for example, when passing-depress the accelerator pedal enough for the vehicle to exceed the set speed. When you release it, the vehicle will return to the speed set prior to the acceleration. CANCELLING THE PRESET SPEED You can cancel the preset speed by: a. Pulling the lever in the direction and releasing it. b. Depressing the brake pedal. c. Pushing the "ON−OFF" switch. TURNING THE SYSTEM ON To operate the cruise control, press the "ON−OFF" switch. This turns the system on. The indicator light in the instrument panel shows that you can now set the vehicle at a desired cruising speed. Another press will turn the system completely off. SETTING AT A DESIRED SPEED The transmission must be in "D" before you set the cruise control speed. Bring your vehicle to the desired speed, push the lever down in the " − SET" direction and release it. This sets the vehicle at that speed. If the speed is not satisfactory, tap the lever up for a faster speed, or tap it down for a slower speed. Each tap changes the set speed by 1.6 km/h (1.0 mph). You can now take your foot off the accelerator pedal. If the vehicle speed falls below about 40 km/h (25 mph), the preset speed will automatically cancel out. If the vehicle speed drops 16 km/h (10 mph) below the preset speed, the preset speed will also automatically cancel out. If the preset speed automatically cancels out other than for the above cases, have your vehicle checked by your Toyota dealer at the earliest opportunity. "CANCEL" CAUTION To avoid accidental cruise control engagement, keep the "ON−OFF" switch off when not using the cruise control. 166 2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)