2005 Toyota Highlander Owners Manual - Page 21

'05 HIGHLANDER_U (L/O 0409) -Switching beep sound This double switch operation to unlock all the side doors and back door can be changed to a single switch operation. For details, contact your Toyota dealer. When all the side doors and back door are unlocked simultaneously with a wireless remote control transmitter, the center interior light, personal lights and ignition switch light come on for about 15 seconds before fading out, even if the door is not opened. (For details, see "Interior lights" on page 124, "Personal lights" on page 125 and "Ignition switch light" on page 126 in Section 1−5.) You have 30 seconds to open a door after using the wireless remote unlock feature. If a door is not opened by then, all the side doors and back door will be automatically locked again. At this time, one beep will be heard, and the turn signal lights flash once. The timing for the automatic door lock function can be changed. For details, contact your Toyota dealer. If the "LOCK" or "UNLOCK" switch is kept pressed in, the locking or unlocking operation is not repeated. Release the switch and then push again. The wireless door locking or unlocking function can be erased. For details, contact your Toyota dealer. You can switch the beep on and off. (The beep is on initially and after battery replacement.) To switch the beep on and off: With the driver's door opened- 1. Insert the ignition key and remove it. 2. Within 5 seconds, insert the ignition key again and turn it to the "ON" position. 3. After 10 seconds, push the same "LOCK", "UNLOCK" or "PANIC" switch twice within 10 seconds. Two beep sounds inform you that the program has been switched on or off. If this procedure is not followed exactly, the beep will not operate as expected. Check the beep on/off operation by pushing the transmitter switch after you finish this procedure. If the beep does not operate as expected, repeat this procedure from step 1. 21 2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)