2005 Toyota Highlander Navigation Manual
2005 Toyota Highlander Manual
2005 Toyota Highlander manual content summary:
- 2005 Toyota Highlander | Navigation Manual - Page 1
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation I Touch switch operation ...2 Inputting letters and numbers ...2 Current position display ...4 Screen scroll operation (one-touch scroll) ...5 Map scale ...8 Orientation of the map ...9 Limitations of the navigation system - 2005 Toyota Highlander | Navigation Manual - Page 2
on the screen. To prevent damage to the screen, lightly touch switches on the screen with your finger. When you touch a switch on the screen, a beep sounds. Do not use objects other than your finger to touch the screen. Inputting letters and numbers When searching for an address or a name, or - 2005 Toyota Highlander | Navigation Manual - Page 3
is incomplete. If the number of matches is four or less, the list is displayed without touching the "List" switch. INFORMATION The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. To - 2005 Toyota Highlander | Navigation Manual - Page 4
receives signals from the GPS. INFORMATION D After the battery disconnection, or on a new vehicle, the current current position is displayed. D To correct the current position manually, see page 77. The current vehicle position mark appears in driving, the current vehicle position mark is fixed in the screen - 2005 Toyota Highlander | Navigation Manual - Page 5
. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) If there is already a preset destination, touch the "Add to " switch or the "Replace " switch. When there is already a preset destination, using the - 2005 Toyota Highlander | Navigation Manual - Page 6
you touch the "Mark" switch, the following screen appears for a few seconds, and then the map screen returns. The registered point is shown by on the map. To change the icon or name, etc., see page 68. You can register up to 106 memory points. If you attempt to register more than - 2005 Toyota Highlander | Navigation Manual - Page 7
of cursor is set as a destination. If there is already a preset destination, the "Add to " switch and the "Replace " switch are displayed. When there is already a preset destination, using the "Add to " switch to set an additional destination, will set the new one as the first point of arrival. To - 2005 Toyota Highlander | Navigation Manual - Page 8
normally. If you continue to touch on the switch, the scale bar changes smoothly. You can change the scale of the map display by touching the scale bar directly. It is not available during driving. The map scale is displayed under the northup symbol or heading-up symbol at the top left of the - 2005 Toyota Highlander | Navigation Manual - Page 9
change the orientation of the map from north-up to heading-up by touching the orientation symbol at the top left of the screen. North-up symbol Regardless of the direction of vehicle travel, North is always up. Heading on the satellite condition, road configuration, vehicle condition or other - 2005 Toyota Highlander | Navigation Manual - Page 10
the instrument panel may obstruct change of direction by going forward and backward, or turning on a turntable in the parking lot. When leaving a covered parking lot or parking garage. When a roof carrier is installed. When driving with tire chains installed. When the tires are worn. After replacing - 2005 Toyota Highlander | Navigation Manual - Page 11
correct the current position manually. For information on might be shown on the opposite side of the street. D When a replacing the tire, implement the operation described in the "D Tire change driving. In auto reroute, a detour route may be shown. After auto reroute, the route may not be changed - 2005 Toyota Highlander | Navigation Manual - Page 12
, copy, modify, adapt, translate, disassemble, decompile, or reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE DATABASE, and provided that the transferee agrees to all terms and conditions of this AGREEMENT. DISCLAIMER OF WARRANTY GDT does not warrant or - 2005 Toyota Highlander | Navigation Manual - Page 13
contain inaccurate or incomplete information due to the passage of time, changing circumstances, and due to the nature of the sources used. speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic conditions; special events; traffic congestion; or travel time. - 2005 Toyota Highlander | Navigation Manual - Page 14
, you accept and agree to all terms and conditions set forth below. 1. Ownership All rights, title adapt, translate, disassemble, decompile, or reverse engineer any portion of the POI Data. 3. Transfer service bureau, time-sharing or other similar purposes. You may not modify the information or remove - 2005 Toyota Highlander | Navigation Manual - Page 15
ARISING OUT OF YOUR POSSESSION, USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF DENSO OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF - 2005 Toyota Highlander | Navigation Manual - Page 16
the names of roads, streets, facilities, and their locations are often changed. In some places, construction on roads may be in progress. For about the availability and pricing of an update. 2. Touch the "Map DVD" switch. Make sure the version of the database on this screen. (The database version - 2005 Toyota Highlander | Navigation Manual - Page 17
BASIC FUNCTIONS To display the disc coverage area, touch the "Covered Area" switch. Confirm the covered area on the screen. Contact your dealer to find out if there is a more recent update released. 17 - 2005 Toyota Highlander | Navigation Manual - Page 18
BASIC FUNCTIONS 18 - 2005 Toyota Highlander | Navigation Manual - Page 19
Destination input by Quick access ...Destination input by "Address" ...Destination input by "POI Name" ...Destination input by "POI Category" ...Destination input by "Emergency" ...Destination input by "Memory" ...Destination input by "Previous" ...Destination input by "Map" ...Destination input by - 2005 Toyota Highlander | Navigation Manual - Page 20
switches to select a search area. Touch the "OK" switch and the "Destination" screen returns. INFORMATION D When inputting the destination, the response to the switch driving, be sure to obey traffic regulations and keep the road conditions in mind. If a traffic sign on the road has been changed, - 2005 Toyota Highlander | Navigation Manual - Page 21
DESTINATION INPUT AND ROUTE GUIDANCE U.S.A. Switch "US1" "US2" States included in the search area Idaho Oregon Island Vermont Washington, D.C. Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Canada Switch "CAN" Provinces and regions included in the search area All provinces and - 2005 Toyota Highlander | Navigation Manual - Page 22
input by Home - Destination input by Quick access - Destination input by "Address" There are 2 ways to input a destination by address. Touch the "Address" switch on the "Destination" screen. Touch the home switch on the "Destination" screen. The screen changes switch even while driving. INFORMATION Guidance - 2005 Toyota Highlander | Navigation Manual - Page 23
to display the screen for inputting a street name. It is possible to input a street name first. Touch the "Street" switch to display the screen for inputting a street name. When you find your desired street name, touch the corresponding switch. The screen changes and displays the map location - 2005 Toyota Highlander | Navigation Manual - Page 24
GUIDANCE (b) Selecting a city to search Touch the "City" switch. Select or enter your desired city. "Input Name": To narrow down the listed items by inputting the city name. If you input a street name first, the screen changes. You can then input the house number. To search by city, the following - 2005 Toyota Highlander | Navigation Manual - Page 25
name. If you have not used the navigation yet, no cities will be displayed on the screen. The current screen changes to the screen for inputting a house number or a street name. (See page 23.) Input a city name. Touch the switch of the desired city name from the displayed list. The current screen - 2005 Toyota Highlander | Navigation Manual - Page 26
- Entering destination" on page 38.) The current screen changes to the screen for inputting a house number or a street name. (See page 23.) Input the name of Point of Interest. Touch the switch of the desired destination. The screen changes and displays the map location of the selected destination - 2005 Toyota Highlander | Navigation Manual - Page 27
".) To search by city, the following three methods are possible. 1. Selecting from the last 5 cities 2. Selecting from the nearest 5 cities 3. Inputting the city name Touch the switch of the desired city name. If you have not used the navigation yet, no cities will be displayed on the screen - 2005 Toyota Highlander | Navigation Manual - Page 28
DESTINATION INPUT AND ROUTE GUIDANCE SELECTING FROM THE NEAREST 5 CITIES Touch the "Nearest 5 Cities" switch. INPUTTING THE CITY NAME Touch the "Input City Name" switch. Touch the switch of the desired city name from the displayed list. Input the city name. Touch the switch of the desired city - 2005 Toyota Highlander | Navigation Manual - Page 29
GUIDANCE (b) Selecting from the categories Touch the - Destination input by "POI Category" The destination can be set by selecting the POI category and the search point. Touch the "POI Category" switch on the "Destination" screen. "Category" switch. When you touch the desired category, the POI - 2005 Toyota Highlander | Navigation Manual - Page 30
of POIs located within approximately 20 miles (30 km) from the selected search point. Touch the "Search Point" switch. INPUTTING CITY CENTER Touch the "Input City Center" switch. Input the city center name. Touch the desired POI category from the list. The selected category icon appears on the - 2005 Toyota Highlander | Navigation Manual - Page 31
DESTINATION INPUT AND ROUTE GUIDANCE SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch the "Current Position" switch. SETTING THE SEARCH POINT VIA THE MAP SCREEN Touch the "Map" switch. When you touch an arrow facing the desired point, the map scrolls in that direction. When you release your - 2005 Toyota Highlander | Navigation Manual - Page 32
desired destination from the listed POI names. - Destination input by "Emergency" By touching the "Emergency" switch on the "Destination" screen, the display changes to a screen to select dealers, hospitals or police stations. During driving, only nearby police stations, hospitals or dealers are - 2005 Toyota Highlander | Navigation Manual - Page 33
points by the registered attribute. INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page 11.) When you touch the switch of your desired memory point, the screen changes and displays the map location of the selected destination and the route - 2005 Toyota Highlander | Navigation Manual - Page 34
order. The screen changes and displays the map location that was previously displayed just before the destination input operation and the route preference. (See " - Entering destination" on page 38.) INFORMATION Guidance starts if you touch the "Enter" switch even while driving. However, the - 2005 Toyota Highlander | Navigation Manual - Page 35
of the two intersecting streets which are located near the destination to be set. Touch the switch of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination - 2005 Toyota Highlander | Navigation Manual - Page 36
the number (CA-1 18). Touch the switch of the desired entrance or exit name. The screen changes and displays the map location of the selected Sort": In alphabetical order by name. "Input Name": An applicable list is displayed by touching this switch and inputting name. trance" or "Exit". You can - 2005 Toyota Highlander | Navigation Manual - Page 37
of the selected destination and the route preference. (See " - Entering destination" on page 38.) Input a telephone number. After inputting a telephone number, touch the "OK" switch, and the screen changes and displays the map location of the selected destination and the road preference. (See - 2005 Toyota Highlander | Navigation Manual - Page 38
is already set, the "Add to " switch and the "Replace " switch are displayed. "Add to ": To add a destination. SCREEN B 3. To start guidance, touch the "Guide" switch. "3 Routes": To select the desired route from three possible routes. (See page 39.) "Route": To change the route. (See pages 42 and - 2005 Toyota Highlander | Navigation Manual - Page 39
INPUT AND ROUTE GUIDANCE D To change the route before starting guidance ROUTE PREFERENCE You can change route preference by touching the "Change" switch much as possible. After choosing conditions, touch the "OK" switch. Touch the "Quick1", "Quick2" or "Short" switch to select the desired route. - 2005 Toyota Highlander | Navigation Manual - Page 40
DESTINATION INPUT AND ROUTE GUIDANCE "Info.": To display the following information about each Ferry This screen displays the route that guides the driver to the destination. The route to the destination is indicated by a highlighted line. Drive along the guided route. When the vehicle approaches a - 2005 Toyota Highlander | Navigation Manual - Page 41
DESTINATION INPUT AND ROUTE GUIDANCE INFORMATION On freeways, interstates or other highways with higher speed limits, the voice guidance will be made at earlier points than on - 2005 Toyota Highlander | Navigation Manual - Page 42
DESTINATION INPUT AND ROUTE GUIDANCE INFORMATION D If the system cannot determine the current vehicle position correctly (in cases is ahead." "You have arrived at your destination. The route guidance is now finished." 1. Touch the "Route" switch. 2. Touch the "Add" switch of "Destination". 42 - 2005 Toyota Highlander | Navigation Manual - Page 43
destination in the same way as the destination input. (See page 20.) (b) Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 1. Touch the "Route" switch. 4. Touch the desired "Add" switch to determine the arrival order of the - 2005 Toyota Highlander | Navigation Manual - Page 44
DESTINATION INPUT AND ROUTE GUIDANCE (c) Deleting destination You can delete a set destination. 1. Touch the "Route" switch. "Delete All": To delete all destinations on the list. 4. A message appears to confirm your request to delete. To delete the destination(s), touch the "Yes" switch. If you - 2005 Toyota Highlander | Navigation Manual - Page 45
DESTINATION INPUT AND ROUTE GUIDANCE (b) Deleting preferred road You can delete a set preferred road. 1. Touch the "Route" switch. 3. Select the preferred road which you wish to modify and touch the "Enter z" switch. 4. A message appears to confirm your request. To add the preferred road, touch - 2005 Toyota Highlander | Navigation Manual - Page 46
"Quick1", "Quick2" or "Short" switch and touch the "OK" switch. 2. Touch the "Search Condition" switch. The "Search Condition" screen appears. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To add or change a route. (For details, see - 2005 Toyota Highlander | Navigation Manual - Page 47
INPUT AND ROUTE GUIDANCE (d) Detour setting While the route guidance is operating, you can change the route to detour around a section of the route where a delay is caused by road repairs, an accident, etc. 1. Touch the "Route" switch. 2. Touch the "Detour" switch. 3. Select the switch - 2005 Toyota Highlander | Navigation Manual - Page 48
choices on the conditions which the system uses to determine the route to your destination. 1. Touch the "Route" switch. (f) Starting route from adjacent road You can start the route guidance from the adjacent road. (ex. When the route guidance guides the route on the freeway, but you drive on the - 2005 Toyota Highlander | Navigation Manual - Page 49
destination and use them for route guidance. 2. Touch the "Show POI Icon" switch to display a particular type of Point of Interest on the screen. A screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI, see page 90.) When you touch the desired Point of - 2005 Toyota Highlander | Navigation Manual - Page 50
DESTINATION INPUT AND ROUTE GUIDANCE D To set a POI as a destination You can select the POI. When your desired Point of Interest overlaps with the cursor, touch the "Enter " switch. The screen changes and displays the map location of the selected destination and route preference. (See " - Entering - 2005 Toyota Highlander | Navigation Manual - Page 51
DESTINATION INPUT AND ROUTE GUIDANCE Route overview 1. Touch the "Map View" switch. The entire route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (For details, see pages 42 and 44.) "Turn List": The following screen displays - 2005 Toyota Highlander | Navigation Manual - Page 52
DESTINATION INPUT AND ROUTE GUIDANCE Touch the "Map" switch of your desired point. The point which you choose is displayed on the map screen. Route preview : To indicate the next destination. 1. Touch the "Map View" switch. : To preview the route to the next destination. : To preview the route - 2005 Toyota Highlander | Navigation Manual - Page 53
DESTINATION INPUT AND ROUTE GUIDANCE Screen configuration You can choose any one of the screen configurations. Depending on the conditions, it may not be possible to select certain screen configuration switches. : To display single map screen. (See page 53.) : To display dual map screen. (See page - 2005 Toyota Highlander | Navigation Manual - Page 54
map. You can edit the right side map by touching any specific point on the right side map. This screen can perform the following procedures. D Changing the map scale D Displaying the POI icon D Changing the orientation of the map Touch the "OK" switch when you complete editing. The screen returns - 2005 Toyota Highlander | Navigation Manual - Page 55
DESTINATION INPUT AND ROUTE GUIDANCE (d) Turn list screen (e) Arrow screen (f) Freeway the freeway exit. "Map": To display the selected map of the exit vicinity. On the left side of the "Map" switch, up to five POIs around the selected exit are displayed. : To scroll for farther junctions or - 2005 Toyota Highlander | Navigation Manual - Page 56
INPUT AND ROUTE GUIDANCE INFORMATION When you drive on a freeway, the screen is automatically divided into two parts, with freeway information screen on the right side screen appears. switch or pushing When touching the the "MAP" button, the intersection guidance screen reappears. switch or pushing - 2005 Toyota Highlander | Navigation Manual - Page 57
DESTINATION INPUT AND ROUTE GUIDANCE Distance and time to switch of the destination you wish to display. The distance and the estimated travel time from the current position to the selected destination are displayed. Displayed while driving along the guidance route. Displayed while driving - 2005 Toyota Highlander | Navigation Manual - Page 58
INPUT AND ROUTE GUIDANCE Foot print map For the area which is covered by the foot print map (Some areas in the following cities; Detroit, Chicago, N.Y., L.A), you can switch to the foot print map on a scale of 75 feet (25 m). D To switch to the foot print map The switch changes into the switch - 2005 Toyota Highlander | Navigation Manual - Page 59
DESTINATION INPUT AND ROUTE GUIDANCE 2. Using an eight-direction arrow, move the cursor to the position of the building you wish to display information. 3. Touch the "Building Info." switch. 4. Details of POIs in some buildings may be displayed. If you wish to see detailed POI information, touch - 2005 Toyota Highlander | Navigation Manual - Page 60
DESTINATION INPUT AND ROUTE GUIDANCE 60 - 2005 Toyota Highlander | Navigation Manual - Page 61
modes ...Notifying traffic restriction ...Intersection guidance ...Guidance screen on freeway ...Street name on scroll map ...Display of building shape ...Function) ...Screen layout function ( POI category change (Show POI Icons) ...Delete previous point ...Map color ...Screen animation ... 61 - 2005 Toyota Highlander | Navigation Manual - Page 62
screen and touch the "Resume Guidance" switch. Push the "MENU" button to display the "Menu" screen and touch the "Suspend Guidance" switch. INFORMATION When you do not have route guidance, the "Suspend Guidance" switch cannot be used. The screen will change to the current position map with route - 2005 Toyota Highlander | Navigation Manual - Page 63
selected item is highlighted in green. Push the "MENU" button to display the "Menu" screen, and touch the "Volume" switch. INFORMATION During route guidance, the voice guidance continues even if the navigation screen is changed to other screens. "Adaptive Volume Control": If you turn the "Adaptive - 2005 Toyota Highlander | Navigation Manual - Page 64
". The confirmation screen will appear. To register, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. When you touch the switch already registered, this screen appears. To replace, touch the "Yes" switch. To cancel the replacement, touch the "No" or "Back - 2005 Toyota Highlander | Navigation Manual - Page 65
user D To delete user Push the "MENU" button to display the "Menu" screen. Then touch the "Select User" switch. Touch the "User wish to change. number" switch you Touch the "Delete" switch of "User number" you wish to delete. The above message appears, then the map screen will be displayed. 65 - 2005 Toyota Highlander | Navigation Manual - Page 66
, sports facilities, etc.) and use the memory points to input a destination. (a) Registering memory points The confirmation screen appears. To delete, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. 1. Push the "MENU" button to display the "Menu" screen - 2005 Toyota Highlander | Navigation Manual - Page 67
ADVANCED FUNCTIONS 2. Touch the "Register" switch of the "Memory Points". A screen similar to the destination input screen appears. Input the desired point in the same way as inputting a destination. (See page 20.) When you finish memory point registration, the memory point data screen will appear - 2005 Toyota Highlander | Navigation Manual - Page 68
can be edited. 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. 2. Touch the "Edit" switch of the "Memory Points". The screen lists the memory points. "Date": Touch this switch to list the memory points in order of the registered date. "Icon": Touch this - 2005 Toyota Highlander | Navigation Manual - Page 69
ADVANCED FUNCTIONS D To change "Icon" Touch the desired icon. You can turn the page by touching "Page 1", "Page 2" or "With Sound" switch. "With Sound": To display sound icons. When your vehicle approaches the memory point, the sound which you chose will sound. Touch the desired sound icon. - 2005 Toyota Highlander | Navigation Manual - Page 70
ADVANCED FUNCTIONS D To change "Attribute" For easy destination input, set the attribute of the memory points as Home or Quick access 1 to 5. To replace the attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the desired attribute. It is - 2005 Toyota Highlander | Navigation Manual - Page 71
ADVANCED FUNCTIONS D To change "Name" D To change "Location" To delete an attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the alphabet and/or numeral keys. When the entry has been completed, touch the "OK" switch on the screen. The - 2005 Toyota Highlander | Navigation Manual - Page 72
ADVANCED FUNCTIONS D To change "Phone #" (telephone number) (c) Deleting memory points 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. Touch numeral keys. When the entry has been completed, touch the "OK" switch on the screen. The previous screen will be - 2005 Toyota Highlander | Navigation Manual - Page 73
the "Enter" switch. 2. Enter the location in the same way as inputting a destination, or display the map of the area you wish to avoid. (See page 20.) INFORMATION INFORMATION If a destination is inputted in the area to avoid or the route calculation cannot be made without running through the area - 2005 Toyota Highlander | Navigation Manual - Page 74
FUNCTIONS (b) Editing area to avoid 1. Touch the "Edit" switch of the "Areas to Avoid" to display the "Edit Area to Avoid" screen. 4. Touch either or switch to change the size of the area to avoid. 3. Touch the "Name" , "Location" or "Area Size" switch on this screen. 2. To edit an area to avoid - 2005 Toyota Highlander | Navigation Manual - Page 75
not on the map. To show the name, touch the "On" switch. Not to show it, touch the "Off" switch. Set the cursor to the desired location, then touch the "Enter" switch. The previous screen will be displayed. Touch either or switch to change the size of area you want to avoid, and touch the "OK - 2005 Toyota Highlander | Navigation Manual - Page 76
on the screen and then the previous screen will be displayed. "Default": This switch initializes all of the settings. "Calibration": You can adjust the current vehicle position mark manually. "Distance": You can select "km" or "miles" as the distance unit. "Estimated Travel Time": You can set the - 2005 Toyota Highlander | Navigation Manual - Page 77
to display each switches and current color. "Screen Animation": You can set some screen displays to be animated. Current position calibration When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually - 2005 Toyota Highlander | Navigation Manual - Page 78
adjust the direction of the current vehicle position mark. Touch the "Enter" switch and the map screen will be displayed. D Tire change calibration The tire change calibration function will be used when replacing the tires. This function will adjust the mis-calculation caused by the circumference - 2005 Toyota Highlander | Navigation Manual - Page 79
You can set the speed that is used for the calculation of the estimated travel time. 2. Touch the "Setup" switch. 3. Touch the "km" or "miles" switch of "Distance" to choose the distance unit. The selected switch is highlighted in green. 4. Touch the "OK" switch. 1. Push the "MENU" button. 79 - 2005 Toyota Highlander | Navigation Manual - Page 80
along the route, which may be affected by road conditions such as traffic jams, construction work. D It is possible to display up to 99 hours 59 minutes. 2. Touch the "Setup" switch. 4. Touch or to set the average vehicle speeds for driving on a Freeway, Main street, and Residential. To set the - 2005 Toyota Highlander | Navigation Manual - Page 81
route. This feature does not operate while you are driving on roads where guidance is not available. To turn the "Auto Reroute" mode on: 1. Push the "MENU" button. 3. Touch the "On" switch of "Auto Reroute". The selected switch is highlighted in green. Adjusting time zone 1. Push the "MENU" button - 2005 Toyota Highlander | Navigation Manual - Page 82
"Auto Voice Guidance" mode on: 1. Push the "MENU" button. 3. Touch the "Change" switch. The "Adjust Time Zone" screen appears on the display. 4. Touch the desired time zone. The selected switch is highlighted in green. 5. Touch the "OK" switch on the screen and the "Setup" screen will be displayed - 2005 Toyota Highlander | Navigation Manual - Page 83
when you using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 3. Touch the "On" switch of "Auto Voice Guidance". The selected switch is highlighted in green. 2. Touch the "Setup" switch. Then switch to display page 2 of the touch "Setup" screen. 83 - 2005 Toyota Highlander | Navigation Manual - Page 84
the "Notify Traffic Restriction" feature is turned on, the system notifies you of traffic or seasonal restriction. 3. Touch the "On" switch of "Voice Guidance in All Modes" and touch the "OK" switch. To turn the "Notify Traffic Restriction" mode on: 1. Push the "MENU" button. 2. Touch the "Setup - 2005 Toyota Highlander | Navigation Manual - Page 85
is turned on, the system will display the intersection guidance screen if you drive with route guidance. 3. Touch the "On" switch of "Notify Traffic Restriction" and touch the "OK" switch. 2. Touch the "Setup" switch. Then switch to display page 2 of the touch "Setup" screen. To turn the - 2005 Toyota Highlander | Navigation Manual - Page 86
is turned on, the system will display the lane guidance screen if you drive on a freeway with route guidance. 3. Touch the "On" switch of "Intersection Guidance" and touch the "OK" switch. 2. Touch the "Setup" switch. Then switch to display page 2 of the touch "Setup" screen. To turn the - 2005 Toyota Highlander | Navigation Manual - Page 87
the name of a street where the cursor is positioned on the scroll map. 3. Touch the "On" switch of "Guidance Screen on Freeway" and touch the "OK" switch. 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. To turn the "Street Name on Scroll Map - 2005 Toyota Highlander | Navigation Manual - Page 88
on the map screen using a scale of 150 feet (50 m) to 300 feet (100 m). 3. Touch the "On" switch of "Street Name on Scroll Map" and touch the "OK" switch. 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. To turn the "Display Building Shape" mode on - 2005 Toyota Highlander | Navigation Manual - Page 89
street name on the map screen. 1. Push the "MENU" button. 3. Touch the "On" switch of "Display Building Shape" and touch the "OK" switch. 3. Touch the "Change" switch of the " Function". 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. 4. Touch the - 2005 Toyota Highlander | Navigation Manual - Page 90
"Show POI Icons" top screen, so that you can easily set which icons to display on the map screen. 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. 3. Touch the "Change" switch of "Show POI Icons". 1. Push the "MENU" button. 4. Touch the category - 2005 Toyota Highlander | Navigation Manual - Page 91
point You can delete your previous destination. 1. Push the "MENU" button. 5. Touch the switch corresponding to the desired category. Then touch the "OK" switch. 2. Touch the "Setup" switch. Then touch switch twice to display page 3 of the "Setup" screen. 3. Touch the vious Point". "Delete - 2005 Toyota Highlander | Navigation Manual - Page 92
color 1. Push the "MENU" button. 4. Touch the switch you want to delete. For efficient previous point search, previous points can be sorted by the "Date" or "Name" switch. 5. To delete the point, touch the "Yes" switch. To cancel the deletion, touch the "No" switch. 2. Touch the "Setup" switch - 2005 Toyota Highlander | Navigation Manual - Page 93
feature is turned on, some switches and screens become animated. (e.g.: change map guidance on the map screen) To turn the "Screen Animation" mode on: 1. Push the "MENU" button. 3. Touch the desired color for day and/or night map color and then touch the "OK" switch to return the map screen. Touch - 2005 Toyota Highlander | Navigation Manual - Page 94
ADVANCED FUNCTIONS 94 - 2005 Toyota Highlander | Navigation Manual - Page 95
OTHER FUNCTIONS SECTION OTHER FUNCTIONS Other functions IV Maintenance information ...96 Calendar with memo ...101 Trip information ...108 Screen setting ...109 Screen adjustment ...110 Clock adjustment ...112 95 - 2005 Toyota Highlander | Navigation Manual - Page 96
To cancel all conditions which have been inputted. "Reset All": To reset the item which has satisfied a condition. Touch the "Off" switch at the top of the "Maintenance" screen to turn off the information screen. When your vehicle needs to be serviced, the icon color will change to orange. display - 2005 Toyota Highlander | Navigation Manual - Page 97
. Replace battery. Replace air filter. Replace brake linings. When Replace wiper blades. Personal items. you touch the "PERSONAL ITEMS" switch on the "Maintenance" screen, the screen changes to the "Personal Event" screen. Touch the keys to input the desired name and then input conditions - 2005 Toyota Highlander | Navigation Manual - Page 98
please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on the driving or the road conditions, the actual date and distance may dealer in the same way as for destination input. (See page 20.) 1. Touch the "Set Dealer" switch on the "Maintenance" screen. 98 - 2005 Toyota Highlander | Navigation Manual - Page 99
dealer You can edit the dealer name, staff, location and phone number. After you input the dealer, the screen changes and displays the map location of the dealer. If it is OK, touch the "Enter" switch. The screen changes to "Edit Dealer" screen. (See "(b) Edit dealer".) 1. Touch the "Set Dealer - 2005 Toyota Highlander | Navigation Manual - Page 100
edit "Dealer" or "Contact" D To edit "Location" D To edit "Phone #" (telephone number) To input the name, touch the alphabet, numeral and/or umlaut keys. You can input up to 24 letters. After inputting, touch the "OK" switch at the bottom right of the screen. The previous screen will be displayed - 2005 Toyota Highlander | Navigation Manual - Page 101
on the screen. 2. A message will appear on the screen. To delete, touch the "Yes" switch. To cancel the deletion, touch the "No" or "Back" switch. Touch the "Enter " switch on "Set Dealer" screen. The screen changes and displays the map location of the registered dealer and the "Route Preference - 2005 Toyota Highlander | Navigation Manual - Page 102
OTHER FUNCTIONS (a) Inputting a memo To display the "Information menu" screen, push the "INFO" button. Then touch the "Calendar" switch. To display the current month calendar, touch the "Today" switch. The current date is indicated by a yellow mark. 1. Touch the day you want to add a memo. 2. - 2005 Toyota Highlander | Navigation Manual - Page 103
text up to 24 letters. After entering the text, touch the "OK" switch at the bottom right of the screen. Touch the "Location" switch to set location. A screen similar to the destination input screen appears. Input the same way as inputting a destination. (See page 20.) You can add the memos up to - 2005 Toyota Highlander | Navigation Manual - Page 104
OTHER FUNCTIONS D Mark color D Date color The date inputted is marked as shown above. You can choose the desired mark and/or date color. Touch the "Mark" switch. Touch the "Date" switch. Touch your desired color for the mark. 104 - 2005 Toyota Highlander | Navigation Manual - Page 105
on the screen. After you choose the date and/or mark color, touch the "OK" switch to display the previous screen. To add a memo, touch the corresponding date. The "Memo" screen appears on the display. Touch the "Add Memo" switch. (See page 102 for inputting a memo.) You can add the memo up to 100 - 2005 Toyota Highlander | Navigation Manual - Page 106
OTHER FUNCTIONS (d) Editing a memo (e) Memo list To edit the memo, touch the corresponding date, and then touch the memo you wish to edit. Touch the switch. "Memo" or "Location" 1. To list the memos you added, touch the "List" switch. 106 - 2005 Toyota Highlander | Navigation Manual - Page 107
OTHER FUNCTIONS 2. Touch the desired search condition to list the memos. The "Memo List" is displayed on the screen. To display the memos listed in a desired period, touch the "Period" switch. Touch the number keys. After setting the period, touch the "OK" switch. The "Memo List" screen will be - 2005 Toyota Highlander | Navigation Manual - Page 108
in the following cases. D When the vehicle is stopped with the engine running, the display will indicate the extremely high fuel consumption. D When the vehicle is driving down a long slope, applying the engine brake, the display will indicate the extremely low fuel consumption. The calculation is - 2005 Toyota Highlander | Navigation Manual - Page 109
vehicle and turn the ignition switch off. The actual driving range varies with driving habits and road conditions. If fuel consumption is good, the driving range will be longer. If fuel consumption is poor, the driving range will be shorter. If the low fuel level warning light comes on, refuel even - 2005 Toyota Highlander | Navigation Manual - Page 110
returns from the audio or air conditioner screen 20 seconds after the end of audio or air conditioner screen operation. "OFF": The audio or air conditioner screen remains on. Select the desired background color and then touch the "OK" switch. Contrast and brightness adjustment "CONTRAST - 2005 Toyota Highlander | Navigation Manual - Page 111
" "RED": Strengthens the red color of the screen. "COLOR" "GREEN": Strengthens the green color of the screen. "TONE" "+": Strengthens the tone of the screen. "TONE" "-": Weakens the tone of the screen. After adjusting the screen, touch the "OK" switch. The rear screen turns off when you touch "Rear - 2005 Toyota Highlander | Navigation Manual - Page 112
, if the instrument panel light control switch is turned fully to the right, mode switching cannot be done. It remains in the day mode. In this case, "DAY MODE" is not shown on the screen. If the screen is set in the day mode with the headlight switch turned to on, this condition is memorized in the - 2005 Toyota Highlander | Navigation Manual - Page 113
manually Before you use the auto adjust function, select the time zone (see "Time Zone" described below). Touch the "ON" switch of "Auto Adjust". The time is automatically adjusted by the GPS clock. "Time Zone": You can select the time zone. When you touch this switch, the display will be change - 2005 Toyota Highlander | Navigation Manual - Page 114
OTHER FUNCTIONS D To set daylight saving time "Daylight Saving Time": You can set or cancel the daylight saving time. To set the daylight saving time touch the "ON" switch, to cancel it touch the "OFF" switch. 114 - 2005 Toyota Highlander | Navigation Manual - Page 115
AUDIO SYSTEM SECTION AUDIO SYSTEM Audio system V Quick reference ...116 Using your audio system ...117 Audio system operating hints ...146 V 115 - 2005 Toyota Highlander | Navigation Manual - Page 116
display screen Touch the switches displayed on the screen to control the radio, cassette tape player and disc players. For details, see page 118. "AUDIO" button Push this button to display the audio control screen. For details, see page 118. "SEEK·TRACK" button Push either side of this button to - 2005 Toyota Highlander | Navigation Manual - Page 117
system. Some information may not pertain to your system. Your audio system works when the ignition switch is in the "ACC" or "ON" position. NOTICE To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. 11 V 12 13 117 - 2005 Toyota Highlander | Navigation Manual - Page 118
off. Turn this knob to adjust the volume. The system turns on in the last mode used. "AUDIO": Push this button to display switches for audio system (audio control mode). You can select the function that enables automatic return to the previous screen from the audio screen. See page 109 for details - 2005 Toyota Highlander | Navigation Manual - Page 119
switch display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected switch is highlighted in green mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of sounds - 2005 Toyota Highlander | Navigation Manual - Page 120
antenna: To prevent damage to the antenna, make sure it is removed before driving your Toyota through an automatic car wash. D On-glass antenna switch displayed on the screen at the audio control mode will display the sound control side up. (The player will automatically eject a disc if the label side - 2005 Toyota Highlander | Navigation Manual - Page 121
clockwise to step up the station band or counterclockwise to step down. Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the extremely weak, the radio switches from stereo to mono reception. In this case, "ST" disappears from the screen. - 2005 Toyota Highlander | Navigation Manual - Page 122
using one of the following methods. Preset tuning: Touch the switch (1 - 6) for the station you want. The switch is highlighted in green and the station frequency appears on the screen. Seek tuning: Push the "SEEK·TRACK" button on either side. The radio will begin seeking up or down for a station - 2005 Toyota Highlander | Navigation Manual - Page 123
the program type changes as in the following: D ROCK D MISC (Miscellaneous) D Inform (Information) D Easy Lis (Easy listening) D Cls/Jazz (Classical music and Jazz) D R & B (Rhythm and Blues) D Religion D Alert (Emergency message) "TYPE SEEK" switch: When a program is set, "TYPE SEEK" switch appears - 2005 Toyota Highlander | Navigation Manual - Page 124
Put the cassette tape in the slot with the exposed tape side to the right and lightly push it in. To stop and eject the cassette tape, are listening to a tape that was recorded with Dolbyr Noise Reduction, touch the switch on the screen. The symbol is highlighted in yellow. The Dolby NR mode reduces - 2005 Toyota Highlander | Navigation Manual - Page 125
AUDIO SYSTEM (c) Manual program selection Program switch: Touch the " A " " switch on the screen to select the other side of a cassette tape. The display indicates which side is currently selected (Y indicates top side, B indicates bottom side). Fast forward switch: Touch the """" switch on the - 2005 Toyota Highlander | Navigation Manual - Page 126
with changer operation (a) Inserting compact discs The ignition switch must be in the "ACC" or "ON" CHECK" appears on the display. D Setting all the discs: 1. Push the "LOAD" button until you hear a beep. 2. The red indicators of the slot start blinking. After the red indicators change to green - 2005 Toyota Highlander | Navigation Manual - Page 127
. (b) Ejecting compact discs D A single disc alone: 1. Touch the disc number you want to eject on the screen. The selected disc number is highlighted in green. 2. Push the " " button for the compact disc briefly. At this time, the red indicators of the slot start blinking. After the disc is ejected - 2005 Toyota Highlander | Navigation Manual - Page 128
selected disc number is highlighted in green. The player will start playing the selected disc the program of your choice, touch the "DISC SCAN" switch a second time. After all the tracks are scanned Use for direct access to a desired track. Push either side of the "SEEK·TRACK" button and hold it until - 2005 Toyota Highlander | Navigation Manual - Page 129
yellow on the screen. The compact disc player will play the next track for 10 seconds, then scan again. To select a track, touch the "SCAN" switch on the screen or push the "SCAN" button a second time. If the player reaches the end of the disc, it will continue scanning at track - 2005 Toyota Highlander | Navigation Manual - Page 130
, damaged or it was inserted up- side down. Clean the disc or insert it correctly. If "CD ERROR" appears on the display: The following causes are possible. D There is a trouble inside the system. Eject the disc. D The inside of the player unit may be too hot due to the very high ambient temperature - 2005 Toyota Highlander | Navigation Manual - Page 131
light turns on while the disc is loaded. If the label faces forward, the disc cannot be played. In this case, "DISC CHECK" appears on the screen. If a disc which is not playable is inserted, "DISC CHECK is turned on, push the "DISC" button again to switch to the DVD player.) V NOTICE Never try to - 2005 Toyota Highlander | Navigation Manual - Page 132
"SEEK·TRACK" button: Use for direct access to a desired track. Push either side of the "SEEK·TRACK" button and hold it until the desired track number appears for 10 seconds, then scan again. To select a track, touch the "SCAN" switch on the screen or push the "SCAN" button a second time. If the - 2005 Toyota Highlander | Navigation Manual - Page 133
a DVD disc NOTE: The playback condition of some DVD video discs may be determined by a DVD video software producer. This DVD player plays a disc as the software producer intended. So some functions may not work properly. Be sure to read the instruction manual for the DVD video disc separately - 2005 Toyota Highlander | Navigation Manual - Page 134
on the screen when you touch a control, the operation relevant to the control is not permitted. DVD audio PLAYING A DVD DISC Push the "AUDIO" button to display DVD screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and the parking brake is applied, the video screen - 2005 Toyota Highlander | Navigation Manual - Page 135
(See page 139.) DESCRIPTION OF DVD AUDIO CONTROLS D Top page controls "Top Menu": If you touch this switch, the menu screen for DVD audio appears. (For operation, refer to the DVD audio disc manual that is provided separately.) "Audio": The audio changing screen appears. (See page 138.) ": The menu - 2005 Toyota Highlander | Navigation Manual - Page 136
ITEM Enter the menu item using "Y", """, "B" and "A" switches and touch "Enter". The player starts playing DVD for that menu item. (For details, see the manual that comes with the DVD provided separately.) Each time you touch "Move Buttons", the controls on the screen move upward and downward. When - 2005 Toyota Highlander | Navigation Manual - Page 137
audio only - Enter the group number by using the "-" and "+" switches. The selected group number will appear on the screen. Push the "Enter" switch. The player starts playing the disc from the entered group number. When you push either side of the "SEEK·TRACK ƜƝ" button, you can select a track. When - 2005 Toyota Highlander | Navigation Manual - Page 138
DVD video only - Each time you touch "Audio", the language is selected from the ones stored in the discs and changed. When you touch "Back", the previous screen returns. CHANGING THE AUDIO FORMAT DVD audio only - Each time you touch "Audio", another audio format stored on the disc is selected - 2005 Toyota Highlander | Navigation Manual - Page 139
on the "Setup Menu 1" screen and "Setup Menu 2" screen. To change the screen, push the "Page1" or "Page2" switch on the screen. After you change the initial setting, push the "Enter" switch. The initial setting switch will be turned off and return to the picture previously. When the "Default - 2005 Toyota Highlander | Navigation Manual - Page 140
switch. D Angle mark The multi-angle mark can be turned on or off on the screen while the disc which is multi-angle compatible is being played. Each time you touch "Angle Mark", the angle mark on the screen turns on or off alternately. D Parental lock The level of viewer restrictions can be changed - 2005 Toyota Highlander | Navigation Manual - Page 141
AUDIO SYSTEM 0920 0519 2608 1412 1620 1922 1821 1115 0512 0101 0102 0106 0113 0118 0119 0125 0126 0201 0205 0207 0208 Italian Spanish Chinese Dutch Portuguese Swedish Russian Korean Greek Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari - 2005 Toyota Highlander | Navigation Manual - Page 142
-Romance Kirundi Romanian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Sinhalese Slovak Slovenian Samoan Shona Somali Albanian 1918 1919 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 2014 2015 2018 2019 2020 2023 2111 2118 2126 Serbian Siswati Sesotho Sundanese Swahili Tamil Telugu Tajik - 2005 Toyota Highlander | Navigation Manual - Page 143
"AUDIO" button to display this screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING OPERATION SWITCHES If you touch the part where switches are not located while you are watching video on the video CD - 2005 Toyota Highlander | Navigation Manual - Page 144
switch: A multiplex transmission changing switch. The mode changes from Main/Sub to Main, to Sub and back to Main/Sub by touching this switch. D Switches on second page " " switch: Use this switch one of the six following messages. If "DISC CHECK" appears on the display: It indicates that the - 2005 Toyota Highlander | Navigation Manual - Page 145
be too hot due to the very high ambient temperature. Remove the magazine video discs: Indicates NTSC format of color TV. Indicates the number of audio to the picture is changed depending on the picture format or violent scenes are skipped or replaced with other scenes. Level 1: DVD video - 2005 Toyota Highlander | Navigation Manual - Page 146
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. "DTS" is a trademark RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio - it is just the normal result of conditions outside the vehicle. - 2005 Toyota Highlander | Navigation Manual - Page 147
conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem to reach your antenna at the same sound alternately strong head and other parts regularly. D A dirty tape head it, especially if it is hot outside. D Store cassettes in - 2005 Toyota Highlander | Navigation Manual - Page 148
use with 12 cm (4.7 in.) discs only. D Extremely high temperatures can keep your compact disc player and DVD player from working. On hot days, use the air conditioning to cool the vehicle interior before you use the players. D Bumpy roads or other vibrations may make your compact disc player and DVD - 2005 Toyota Highlander | Navigation Manual - Page 149
AUDIO SYSTEM NOTICE Do not use special shaped, transparent/ translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. Special shaped discs Low quality discs V Transparent - 2005 Toyota Highlander | Navigation Manual - Page 150
Avoid getting fingerprints on them, particularly on the shiny side. D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using - 2005 Toyota Highlander | Navigation Manual - Page 151
AIR CONDITIONING SECTION AIR CONDITIONING Air conditioning VI Automatic air conditioning controls ...152 151 - 2005 Toyota Highlander | Navigation Manual - Page 152
or Centigrade) ...157 Fan speed control switch ...154 Air intake selector button ...155 For information about the "Rear window defogger", please refer to the Owner's Manual. Windshield air flow button ...157 Air conditioning operation screen display ("CLIMATE") button ...153 "OFF" button ...154 - 2005 Toyota Highlander | Navigation Manual - Page 153
"CLIMATE" control 6U302 paste Push this button to display switches for automatic air conditioning controls. The ignition key must be in the "ON" position. NOTICE To prevent the battery from being discharged, do not leave the air conditioning on longer than necessary when the engine is not running - 2005 Toyota Highlander | Navigation Manual - Page 154
operation corresponding to the depressed switch is set. Other conditions continue to be adjusted automatically. (a) Air flow selection The outlets from which air is delivered can be selected manually by touching the switch. The function of each mode is as follows: Panel - Air flows mainly from the - 2005 Toyota Highlander | Navigation Manual - Page 155
operation. If the air conditioning compressor does not operate, the display light of the "A/C" switch will blink. If the display light of the "A/C" switch blinks even when the "A/C" switch is touched again, have the compressor checked by your nearest dealer. If the engine coolant temperature becomes - 2005 Toyota Highlander | Navigation Manual - Page 156
suitable fan speed, air flow, air intake and on-off the air conditioning according to the temperature. INFORMATION D This automatic control has additional function as described below, when the "AUTO" button is pushed. (a) "AUTO" button Push the "AUTO" button. An indicator light will illuminate to - 2005 Toyota Highlander | Navigation Manual - Page 157
AIR CONDITIONING - Windshield defogging and defrosting (b) Climate control To increase the interior temperature, press the "Ɯ" side, to decrease it, press the "Ɲ" side. Use the "TEMP" button to set the desired vehicle interior temperature. The "TEMP" selector button is used to set the desired - 2005 Toyota Highlander | Navigation Manual - Page 158
hot air, allowing the air conditioning to cool the interior more quickly. Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example). If air flow control is not satisfactory, check the side vents. (See "(e) Side vents".) On humid days, do not blow - 2005 Toyota Highlander | Navigation Manual - Page 159
the desired temperature Air intake - FRESH (outside air) Air conditioning - ON For manual operation - Fan speed - To the desired fan speed Temperature - Towards low temperature Air intake - FRESH (outside air) Air flow - PANEL Air conditioning -ON Ventilation For best results, set controls to: For - 2005 Toyota Highlander | Navigation Manual - Page 160
air flow. - Side vents If air flow control is not satisfactory, check the side vents. The side vents may be opened or closed as shown. When outside temperature is cold like a winter season, air flow temperature from the side vents may not be warmed up enough for a while until that the engine - 2005 Toyota Highlander | Navigation Manual - Page 161
. The air conditioning filter may clog after long use. The filter may need to be replaced if the air flow of the air conditioner and heater experiences extreme reductions in operating efficiency, or if the windows become to fog up easily. If the symptoms of air conditioning efficiency problems occur - 2005 Toyota Highlander | Navigation Manual - Page 162
AIR CONDITIONING 1. Remove the clip with a Phillips-head screwdriver. 2. Open the glove box and push each side of the glove box to disconnect the claws. 3. Pull the filter cover toward you and remove it. 4. Remove the filter case toward you. 162 - 2005 Toyota Highlander | Navigation Manual - Page 163
AIR CONDITIONING 5. Remove the filter from the filter case. 6. Inspect the filter on the surface. If it is dirty, it should be replaced. INFORMATION The air filter should be installed properly in position. The use of air conditioning with the air filter removed may cause deteriorated dustproof - 2005 Toyota Highlander | Navigation Manual - Page 164
perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 9 through 11. i 2005 HIGHLANDER Navigation from Aug. '04 Prod. (OM48539U) - 2005 Toyota Highlander | Navigation Manual - Page 165
about this manual For safety reasons, this manual indicates engine running, always apply the parking brake for safety. After a few seconds, the "CAUTION" screen appears. either "English" or "Français" to select a language. Read Touch and follow the instructions. When you touch the "I Agree" switch - 2005 Toyota Highlander | Navigation Manual - Page 166
allow others to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when you start driving. Unavailable switches are dimmed. You can input your destination and select your route only when the vehicle is not moving - 2005 Toyota Highlander | Navigation Manual - Page 167
instruction safely and legally. This system cannot warn you about such things as the safety of an area, condition of streets, and availability of emergency services. If you are unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver - 2005 Toyota Highlander | Navigation Manual - Page 168
v - 2005 Toyota Highlander | Navigation Manual - Page 169
, 108, 109 3 Zoom out switch Touch this switch to reduce the map scale...8 4 "Mark" switch Touch this switch to register the cursor position as a memory point...6 5 "Route" switch Touch this switch to change the route...42, 44 6 "Map View" switch Touch this switch to obtain information regarding the - 2005 Toyota Highlander | Navigation Manual - Page 170
display the "Menu" screen...xii, 16, 61 11 Screen configuration switch Touch this switch to change the screen mode...53 12 "DEST" button Push this button North-up or heading-up symbol This symbol indicates a map view with north-up or heading-up. Touching this symbol changes the map orientation...9 15 - 2005 Toyota Highlander | Navigation Manual - Page 171
- "Destination" screen To search for a destination, the switches below perform the following operations. 1 "Address" switch You can input the house number and the street address by using the input keys...22 2 "POI Name" switch You can select one of the many POIs (Points of Interest) that have been - 2005 Toyota Highlander | Navigation Manual - Page 172
switch switch You can enter the name of a freeway (interstate) entrance or exit...36 10 "Phone #" switch You can enter a destination by the telephone number...37 11 "Coordinates" switch You can set a destination using latitude and longitude coordinates...37 12 Quick access switch Home switch You - 2005 Toyota Highlander | Navigation Manual - Page 173
information regarding the disc version or covered area...12 2 "Select User" switch Enables recall of up to three memorized user setting patterns...63 3 "Setup" switch Enables various settings for the navigation system...76 4 "My Places" switch Enables changes to "Memory points" and "Areas to