2005 Toyota Land Cruiser Owners Manual - Page 171

(Reverse/Fast forward buttons) Cassette Player Push the fast forward button to fast forward a cassette tape. "FF" will appear on the display. Push the reverse button to rewind a tape. "REW" will appear on the display. To stop the tape while it is fast forwarding, push the fast forward button or "TAPE"; to stop the tape while it is rewinding, push the reverse button or "TAPE". If a tape side rewinds completely, the cassette player will stop and then play that same side. If a tape fast forwards completely, the cassette player will play the other side of the tape, using the auto−reverse feature. Compact Disc Player If you want to fast forward or reverse through a compact disc track, push and hold in the fast forward or reverse button. When you release the button, the compact disc player will resume playing. AM button Push "AM·SAT" to turn on the radio and select the AM band. "AM" will appear on the display. If the audio system is off, you can turn on the radio by pushing "AM". Also, push "AM" to switch from cassette or compact disc operation to radio operation. AUDIO−TUNE Knob This knob is used to adjust the tone and balance or to tune the station manually on the radio mode. Tone and sound balance adjustment function- Each time you push the "AUDIO−TUNE" knob, the display changes as in the following. To adjust the tone and balance or turn on or off the automatic sound levelizer, turn the knob. BAS: Adjusts low−pitched tones. MID: Adjusts mid−pitched tones. TRE: Adjusts high−pitched tones. BAL: Adjusts the sound balance between the right and left speakers. FAD: Adjusts the sound balance between the front and rear speakers. Manual tuning function- Turn the knob. The radio will step up or down to another frequency. XM satellite radio*- Turn the knob. The radio will step up or down the channel. *: Use of satellite radio requires XM tuner and service. Contact your Toyota dealer for details. DISC (Compact Disc) button Push "DISC" to switch from radio or cassette operation to compact disc operation. If the audio system is off, you can turn on the compact disc player by pushing "DISC". In both cases, a disc must already be loaded in the player. When the audio is set into compact disc operation, the display shows the track or, track and disc number currently being played. If the player or another unit equipped with the player malfunctions, your audio system will display one of the four following error messages. 158