2005 Toyota Land Cruiser Owners Manual - Page 208

Glove box Garage door opener Buttons Indicator light The battery side of the hand−held transmitter must be pointed away from the HomeLinkR during the programming process. For Canadian users, follow the procedure in "Programming an entrance gate/Programming all devices in the Canadian market". 1. Decide which of 3 HomeLinkR buttons you want to program. Push and hold down one of the buttons until the indicator corresponding to the selected channel begins to flash. To use the glove box, do this. To open: Pull the lever. With the instrument panel lights on, the glove box light will come on when the glove box is open. To lock: Insert the master key and turn it clockwise. The garage door opener ( HomeLinkR Universal Transceiver) is manufactured under license from HomeLinkR and can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, etc. (a) Programming the HomeLinkR The HomeLinkR in your vehicle has 3 buttons and you can store one program for each button. To ensure correct programming into the HomeLinkR, install a new battery in the hand−held transmitter prior to programming. 2. Place your hand−held garage transmitter 25 to 75 mm (1 to 3 in.) away from the surface of the HomeLinkR. Keep the indicator light on the HomeLinkR in view while programming. 3. Simultaneously press and hold the hand−held garage transmitter button along with the selected HomeLinkR button. 4. When the indicator light on the HomeLinkR changes from a slow to a rapid flash after 20 seconds, you can release both buttons. CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep the glove box door closed while driving. 195