2005 Toyota Land Cruiser Owners Manual - Page 278

-Changing wheels To raise the vehicle, insert the jack handle end into the joint of the jack (it is a loose fit) and turn it clockwise with the handle, making sure the handle remains firmly fitted onto the jack handle end. As the jack touches the vehicle and begins to lift, double − check that it is properly positioned. CAUTION Never get under the vehicle when the vehicle is supported by the jack alone. 7. Remove the wheel nuts and change tires. Lift the flat tire straight off and put it aside. Roll the spare wheel into position and align the holes in the wheel with the bolts. Then lift up the wheel and get at least the top bolt started through its hole. Wiggle the tire and press it back over the other bolts. Before putting on wheels, remove any corrosion on the mounting surfaces with a wire brush or such. Installation of wheels without good metal −to −metal contact at the mounting surface can cause wheel nuts to loosen and eventually cause a wheel to come off while driving. 265