2005 Toyota Land Cruiser Owners Manual - Page 34

SETTING FUNCTIONS You can set the following functions by yourself. To set the mode 1 (the automatic locking operation linked to shift lever position): 1. Set the parking brake, close all doors and turn the ignition switch to the "ON" position. 2. Shift the selector lever into the "P" position. 3. Within 10 seconds of turning the ignition switch to the "ON" position, press and hold the front of the driver's side power door lock switch for 5 seconds and then release it. 4. The doors will be locked and unlocked to indicate that the function is set. To cancel the function, do the above operation again. To set the mode 2 (the automatic locking operation linked to vehicle speed): 1. Set the parking brake, close all doors and turn the ignition switch to the "ON" position. 2. Shift the selector lever from the "P" into the "N" position. 3. Within 10 seconds of turning the ignition switch to the "ON" position, press and hold the front of the driver's side power door lock switch for 5 seconds and then release it. 4. The doors will be locked and unlocked to indicate that the function is set. To cancel the function, do the above operation again. To set the mode 3 (the automatic unlocking operation linked to the ignition switch): 1. Set the parking brake, close all doors and turn the ignition switch to the "ON" position. 2. Shift the selector lever into the "P" into the "N" position. 3. Within 10 seconds of turning the ignition switch to the "ON" position, press and hold the rear of the driver's side power door lock switch for 5 seconds and then release it. 4. The doors will be locked and unlocked to indicate that the function is set. To cancel the function, do the above operation again. To set the mode 4 (the automatic unlocking operation linked to shift lever position): 1. Set the parking brake, close all doors and turn the ignition switch to the "ON" position. 2. Shift the selector lever into the "P" position. 3. Within 10 seconds of turning the ignition switch to the "ON" position, press and hold the rear of the driver's side power door lock switch for 5 seconds and then release it. 4. The doors will be locked and unlocked to indicate that the function is set. To cancel the function, do the above operation again. CAUTION To prevent an accident, set and cancel the function with the parking brake set securely. 21