2005 Toyota Tacoma Owners Manual - Page 124

05 02.25 Front seat- 2. Front seat without seatback table- Widen the gap between the seat cushion and seatback slightly and confirm the position of the lower anchorages near the button on the seatback. Front seat with seatback table-Widen the slits of the seat cushion slightly and confirm the position of the lower anchorages near the button on the seat cushion. 3. Type A-Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B-Latch the buckles onto the anchorages. Rear seat- Type A-Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B-Latch the buckles onto the anchorages. For owners in Canada-The symbol on a child restraint system indicates the presence of a lower connector system. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 113 in this Section.) For installation details, refer to the instruction manual equipped with each product. D Do not install a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. Otherwise, the child or front seat occupant(s) may be killed or seriously injured in case of sudden braking or a collision. CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D After securing the child restraint system, never slide or recline the seat. 124 2005 TACOMA from Mar. '05 Prod. (OM35862U)