2005 Toyota Tacoma Owners Manual - Page 310

05 02.25 -Positioning the jack -Raising your vehicle LS40014 Front Rear LS40005a LS40037 Front of vehicle 5. Position the jack at the correct jack point as shown. Make sure the jack is positioned on a level and solid place. JACK POINTS: Front-Under the frame side rail Rear-Under the rear axle housing Put a wheel nut wrench, jack handle extension and jack handle end together as shown in the illustration. 1 Jack handle end 2 Jack handle extension 3 Wheel nut wrench CAUTION Make sure they are each securely fixed with screws. 6. After making sure that no one is in the vehicle, as the jack touches the vehicle and begins to fit, double- check that it is properly positioned. Rear side only- When positioning the jack under the rear axle housing, make sure the groove on the top of the jack fits with the rear axle housing. 310 2005 TACOMA from Mar. '05 Prod. (OM35862U)