2005 Toyota Tacoma Owners Manual - Page 311

05 02.25 -Changing wheels To raise the vehicle, insert the jack handle end with the extension into the jack (it is a loose fit) and turn it clockwise with the handle. As the jack touches the vehicle and begins to lift, double- check that it is properly positioned. CAUTION Never get under the vehicle when the vehicle is supported by the jack alone. 7. After making sure that no one is in the vehicle, raise it high enough so that the spare tire can be installed. Remember you will need more ground clearance when putting on the spare tire than when removing the flat tire. 8. Remove the wheel nuts and change tires. Lift the flat tire straight off and put it aside. Roll the spare wheel into position and align the holes in the wheel with the bolts. Then lift up the wheel and get at least the top bolt started through its hole. Wiggle the tire and press it back over the other bolts. LS40015 LS40016 2005 TACOMA from Mar. '05 Prod. (OM35862U) 311