2005 Toyota Tacoma Owners Manual - Page 314

05 02.25 -Reinstalling wheel ornament (type A only) -After changing wheels 12.Check the air pressure of the replaced tire. Adjust the air pressure to the specification designated on page 387 in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible. 13.Restow all the tools, jack and flat tire securely. With a spare tire of the same wheel type as the installed tires- As soon after changing wheels as possible, tighten the wheel nuts to the torque specified on page 387 in Section 8 with a torque wrench. Have a technician repair the flat tire. With a spare tire of different wheel type from the installed tires- As soon after changing wheels as possible, tighten the wheel nuts to the torque specified on page 387 in Section 8 with a torque wrench. Have a technician repair the flat tire and replace the spare tire with it. CAUTION Before driving, make sure all the tools, jack and flat tire are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden braking. LS40021 11. Reinstall the wheel ornament. Put the wheel ornament into position and then tap it firmly with the side or heel of your hand to snap it into place. CAUTION Take due care in handling the ornament to avoid unexpected personal injury. 314 2005 TACOMA from Mar. '05 Prod. (OM35862U)