2006 Toyota Sequoia Navigation Manual
2006 Toyota Sequoia Manual
2006 Toyota Sequoia manual content summary:
- 2006 Toyota Sequoia | Navigation Manual - Page 1
switch operation ...2 Inputting letters and numbers ...3 Current position display ...5 Screen scroll operation (one-touch scroll) ...5 Map scale ...9 Orientation of the map ...9 Limitations of the navigation system ...10 Map database information and updates ...12 1 - 2006 Toyota Sequoia | Navigation Manual - Page 2
the reverse order. If you turn the ignition switch off, the display will automatically move back to position 0 . The display will automatically resume the previous position when the ignition switch is turned to the "ACC" or "ON" position. INFORMATION Under extremely cold conditions, the display may - 2006 Toyota Sequoia | Navigation Manual - Page 3
the "List" switch. Matching items from the database are listed even if the entered address or name is incomplete. If the number of matches is four or less, the list is displayed without touching the "List" switch. 3 - 2006 Toyota Sequoia | Navigation Manual - Page 4
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. To shift to the next or previous page. To scroll up or down one item at a time. This expresses a displayed screen - 2006 Toyota Sequoia | Navigation Manual - Page 5
Touch any point on the map and that point moves to the center of the screen and is shown by the cursor mark. INFORMATION D After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is - 2006 Toyota Sequoia | Navigation Manual - Page 6
button, the current vehicle position mark returns to the center of the screen and the map moves as you When you use the one-touch scroll feature, the current vehicle position mark may destination, touch the "Add to " switch or the "Replace " switch. When there is already a preset destination, using - 2006 Toyota Sequoia | Navigation Manual - Page 7
the "Enter " switch, the position of cursor is set as a destination. If there is already a preset destination, the "Add to " switch and the "Replace " switch are displayed. When there is already a preset destination, using the "Add to " switch to set an additional destination, will set the new one - 2006 Toyota Sequoia | Navigation Manual - Page 8
icon, the name and "Info." switch are displayed on the top of screen. If there is already a set destination, the "Add to " switch and the "Replace " switch are displayed. When there is already a preset destination, using the "Add to " switch to set an additional destination, will set the new one as - 2006 Toyota Sequoia | Navigation Manual - Page 9
, the scale bar changes smoothly. You can change the scale of the map display by touching the scale bar directly. It is not available during driving. The map scale is displayed under the northup symbol or heading-up symbol at the top left of the screen. North-up screen Heading-up - 2006 Toyota Sequoia | Navigation Manual - Page 10
may obstruct the GPS signals. The GPS satellites may not send signals due to repairs or improvements being made to them. Even when the navigation system is receiving clear GPS signals, the vehicle position may not be shown accurately or inappropriate route guidance may occur in some cases. 10 - 2006 Toyota Sequoia | Navigation Manual - Page 11
calibration correctly. After repeating a change of direction by going forward and backward, or turning on a turntable in the parking lot. When leaving a covered parking lot or parking garage. When a roof carrier is installed. When driving with tire chains installed. When the tires are worn. After - 2006 Toyota Sequoia | Navigation Manual - Page 12
driving. In auto reroute, a detour route may be shown. After auto reroute, the route may not be changed. An unnecessary U-turn may be shown or announced. A location may have multiple names and the system of all four tires is correct. Map database information and updates This system uses the maps - 2006 Toyota Sequoia | Navigation Manual - Page 13
or reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system for which it In any event GDT's liability for direct damages is limited to the price of your copy of the DATABASE. THE DISCLAIMER OF WARRANTY AND LIMITATION - 2006 Toyota Sequoia | Navigation Manual - Page 14
slope or grade; bridge height, weight or other limits; road or NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided engineer any portion of the POI Data. 3. Transfer You may not transfer the POI Data to third parties, except together with the system - 2006 Toyota Sequoia | Navigation Manual - Page 15
personal, noncommercial purposes, and not for service bureau, time-sharing or other similar way. You may not decompile, disassemble or reverse engineer any portion of this information, and may not use this information with any products, systems, or applications installed or otherwise connected - 2006 Toyota Sequoia | Navigation Manual - Page 16
of this product. END-USER TERMS The Map Data Disc ("Data") is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and DENSO CORPORATION ("[LICENSEE - 2006 Toyota Sequoia | Navigation Manual - Page 17
for which you were licensed, and not for service bureau, time-sharing or other similar purposes. reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer this Data with any products, systems, or applications installed or otherwise connected - 2006 Toyota Sequoia | Navigation Manual - Page 18
the above may not apply to you. Export Control. You agree not to export from anywhere any part of the Data provided to you or any direct provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the - 2006 Toyota Sequoia | Navigation Manual - Page 19
52.227-14(g)(1), RIGHTS IN DATAGENERAL (Protection of limited rights data and computer "Limited Rights Notice" at FAR 52.227-14(g)(2) (Alternate II), which shall be affixed to the Licensed Data and any reproduction of these data, in whole or in part): LIMITED RIGHTS NOTICE (JUN 1987) These data may - 2006 Toyota Sequoia | Navigation Manual - Page 20
primarily around metropolitan centers, detailed route guidance precision because the data (no right turns, one-way traffic, etc.) is information on some areas in this system might be different from the actual about the availability and pricing of an update. 2. Touch the "Map DVD" switch. Make - 2006 Toyota Sequoia | Navigation Manual - Page 21
or sudden stopping while driving, keep the display closed. D Take care not to jam your hand while the display is moving. Otherwise, you could be injured. NOTICE Do not obstruct the display while it is moving. It could damage your navigation system. INFORMATION Under extremely cold conditions, the - 2006 Toyota Sequoia | Navigation Manual - Page 22
BASIC FUNCTIONS 22 - 2006 Toyota Sequoia | Navigation Manual - Page 23
DESTINATION INPUT AND ROUTE GUIDANCE SECTION Basic functions in frequent use II 24 24 26 26 26 30 33 36 37 38 38 39 40 41 41 42 42 44 44 46 48 53 55 56 57 61 62 DESTINATION INPUT AND ROUTE GUIDANCE Destination input ...Selecting the search area ...Destination input by Home ...Destination input by - 2006 Toyota Sequoia | Navigation Manual - Page 24
than 0.5 mile (800 m), the map scale changes to 0.5 mile (800 m) automatically. Set the destination again. D To select an "Address", "POI Name", shortest route nor a route without traffic congestion. CAUTION While you are driving, be sure to obey traffic regulations and keep the road conditions in - 2006 Toyota Sequoia | Navigation Manual - Page 25
DESTINATION INPUT AND ROUTE GUIDANCE U.S.A. Switch "US1" "US2" States included in the search area Idaho Oregon Washington California Nevada Arizona Colorado Montana New Mexico Utah Wyoming Iowa Kansas Minnesota Missouri North Dakota Nebraska South Dakota Oklahoma Texas Illinois Indiana Kentucky - 2006 Toyota Sequoia | Navigation Manual - Page 26
register the "Quick Access", see page 74.) INFORMATION Guidance starts from your current position to your home if you touch the "Enter" switch even while driving. INFORMATION Guidance starts from your current position to the quick access point if you touch the "Enter" switch even while - 2006 Toyota Sequoia | Navigation Manual - Page 27
DESTINATION INPUT AND ROUTE GUIDANCE (a) Inputting a house number and a street name Input the street name. Touch numerals directly on the screen to input a house number. After inputting a house number, touch the "OK" switch to display the screen for inputting a street name. It is possible to - 2006 Toyota Sequoia | Navigation Manual - Page 28
DESTINATION INPUT AND ROUTE GUIDANCE (b) Selecting a city to search Touch the "City" switch. Select or enter your desired city. "Input Name": To narrow down the listed items by inputting the city name. If you input a street name first, the screen changes. You can then input the house number. To - 2006 Toyota Sequoia | Navigation Manual - Page 29
DESTINATION INPUT AND ROUTE GUIDANCE SELECTING FROM THE LAST 5 CITIES SELECTING FROM THE NEAREST 5 CITIES Touch the "Nearest 5 Cities" switch. INPUTTING THE CITY NAME Touch the "Input City Name" switch. Touch the switch of the desired city name. If you have not used the navigation yet, no cities - 2006 Toyota Sequoia | Navigation Manual - Page 30
DESTINATION INPUT AND ROUTE GUIDANCE - Destination input by "POI Name" Touch the "POI Name" switch on the "Destination" screen. Touch the switch of the desired city name from the displayed list. "Map": To display the selected destination and the route preference. (See " - Entering destination" on - 2006 Toyota Sequoia | Navigation Manual - Page 31
DESTINATION INPUT AND ROUTE GUIDANCE (a) Selecting a city to search Touch the "City" switch. SELECTING FROM THE LAST 5 CITIES Touch the switch of the desired destination. "Dist. Sort": In the order of distance from your current position. The distance from your current position up to the - 2006 Toyota Sequoia | Navigation Manual - Page 32
DESTINATION INPUT AND ROUTE GUIDANCE SELECTING FROM THE NEAREST 5 CITIES Touch the "Nearest 5 Cities" switch. INPUTTING THE CITY NAME Touch the "Input City Name" switch. Touch the switch of the desired city name from the displayed list. Input the city name. Touch the switch of the desired city - 2006 Toyota Sequoia | Navigation Manual - Page 33
DESTINATION INPUT AND ROUTE GUIDANCE (b) Selecting from the categories Touch the - Destination input by "POI Category" The destination can be set by selecting the POI category and the search point. Touch the "POI Category" switch on the "Destination" screen. "Category" switch. When you touch the - 2006 Toyota Sequoia | Navigation Manual - Page 34
within approximately 20 miles (30 km) from the selected search point. Touch the "Search Point" switch. INPUTTING CITY CENTER Touch the "Input City Center" switch. Input the city center name. Touch the desired POI category from the list. The selected category icon appears on the top left of the - 2006 Toyota Sequoia | Navigation Manual - Page 35
DESTINATION INPUT AND ROUTE GUIDANCE SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch the "Current Position" switch. SETTING THE SEARCH POINT VIA THE MAP SCREEN Touch the "Map" switch. When you touch an arrow facing the desired point, the map scrolls in that direction. When you release your - 2006 Toyota Sequoia | Navigation Manual - Page 36
By touching the "Emergency" switch on the "Destination" screen, the display changes to a screen to select dealers, hospitals or police stations. During driving, only nearby police stations, hospitals or dealers are shown. The current position is shown with an address, the latitude and the longitude - 2006 Toyota Sequoia | Navigation Manual - Page 37
": To list the memory points in alphabetical order. "Attribute": To list the memory points by the registered attribute. INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page 12.) When you touch the switch of your desired memory point, the screen - 2006 Toyota Sequoia | Navigation Manual - Page 38
the destination input operation and the route preference. (See " - Entering destination" on page 42.) INFORMATION Guidance starts if you touch the "Enter" switch even while driving. However, the cursor cannot be moved. 38 - 2006 Toyota Sequoia | Navigation Manual - Page 39
DESTINATION INPUT AND ROUTE GUIDANCE - Destination input by "Intersection" Touch the "Intersection" switch on the "Destination" screen. Input the name of the two intersecting streets which are located near the destination to be set. Touch the switch of the desired item. After inputting the two - 2006 Toyota Sequoia | Navigation Manual - Page 40
DESTINATION INPUT AND ROUTE GUIDANCE - Destination input by "Freeway Ent./Exit" To input a freeway entrance or exit, touch the "Freeway Ent./Exit" switch on the "Destination" screen. Select the desired freeway by touching the switch. Be sure to use the complete name of the freeway or highway, - 2006 Toyota Sequoia | Navigation Manual - Page 41
DESTINATION INPUT AND ROUTE GUIDANCE - Destination input by "Coordinates" Touch the "Coordinates" switch on the "Destination" screen. - Destination input by "Phone #" Touch the "Phone "Destination" screen. #" switch on the INFORMATION D If there is no match for the telephone number inputted, a - 2006 Toyota Sequoia | Navigation Manual - Page 42
to see name, address, and phone number, etc. INFORMATION D Guidance can be suspended or resumed. (See page 66.) D If you keep touching the "Guide" switch until a beep sounds, Demo mode will start. SCREEN A 1. When you touch an arrow facing the desired point, the map scrolls in that direction - 2006 Toyota Sequoia | Navigation Manual - Page 43
of GPS signals, it is automatically corrected. 3 ROUTES SELECTION To select the desired route from three routes, touch the "3 Routes" switch on SCREEN B. You can turn the indicator on or off by touching the switch. When searching for a route, the system avoids routes where the indicator is - 2006 Toyota Sequoia | Navigation Manual - Page 44
to the destination. The route to the destination is indicated by a highlighted line. Drive along the guided route. When the vehicle approaches a guidance point such as an intersection or a freeway, the screen automatically divides in two to display the guidance screen. (For details, see page 57 - 2006 Toyota Sequoia | Navigation Manual - Page 45
"In a quarter of a mile, traffic circle ahead, and then 3rd exit ahead." "The 3rd exit ahead." "The exit ahead." (Beep sound only) ∗: 2 The system indicates a U-turn if the distance between two one-way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 - 2006 Toyota Sequoia | Navigation Manual - Page 46
INPUT AND ROUTE GUIDANCE INFORMATION D If the system cannot determine the current vehicle position correctly (in (a) Adding destinations You can add destinations and search again for the routes. The system announces your approach to the final destination. 1 2 "Your destination is ahead." - 2006 Toyota Sequoia | Navigation Manual - Page 47
. Reordered number of arrival is displayed on the right side of the screen. When you finish selecting the destinations, touch the "OK" switch. The system searches for the guidance route again, and displays the entire route. Even if you do not touch the "OK" switch, the entire route is displayed - 2006 Toyota Sequoia | Navigation Manual - Page 48
"No" switch, the previous screen will return. 5. If more than one destination is set, touch the "OK" switch after deleting the destinations. The system searches for the guidance route again, and displays the entire route. Setting and deleting route (a) Adding preferred road You can add points you - 2006 Toyota Sequoia | Navigation Manual - Page 49
DESTINATION INPUT AND ROUTE GUIDANCE (b) Deleting preferred road You can delete a set preferred road. 1. Touch the "Route" switch. 3. Select the preferred road which you wish to modify and touch the "Enter z" switch. 4. A message appears to confirm your request. To add the preferred road, touch - 2006 Toyota Sequoia | Navigation Manual - Page 50
set, touch the "OK" switch after deleting the preferred road. The system searches for the guidance route again, and displays entire route. (c) Search condition route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To add or change a route. (For details, - 2006 Toyota Sequoia | Navigation Manual - Page 51
will calculate an entire new route to the destination. This picture shows an example of how the system would guide you around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates - 2006 Toyota Sequoia | Navigation Manual - Page 52
road. (ex. When the route guidance guides the route on the freeway, but you drive on the parallel way along a freeway.) 1. Touch the "Route" switch. 3. You can turn the indicator on or off by touching the switch. When searching for a route, the system avoids routes where the indicator is dimmed as - 2006 Toyota Sequoia | Navigation Manual - Page 53
94.) When you touch the desired Point of Interest category, symbols will appear on the map screen indicating where the POI addresses are located. To turn off the symbols of the Points of Interest on the map screen, touch the "POI Off" switch. "More": If you cannot find your desired Point - 2006 Toyota Sequoia | Navigation Manual - Page 54
Point of Interest, touch this switch. Then choose one of the categories. The system will list the points within 20 miles (30 km). Touch the switch of your to set as a destination. The map will shift so that the icon is centered on the screen and overlaps with the cursor . At this time, the distance - 2006 Toyota Sequoia | Navigation Manual - Page 55
of roads by touching or . However, not all road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street name closest to - 2006 Toyota Sequoia | Navigation Manual - Page 56
DESTINATION INPUT AND ROUTE GUIDANCE Touch the "Map" switch of your desired point. The point which you choose is displayed on the map screen. Route preview : To indicate the next destination. 1. Touch the "Map View" switch. : To preview the route to the next destination. : To preview the route - 2006 Toyota Sequoia | Navigation Manual - Page 57
single map screen. (See page 57.) : To display dual map screen. (See page 58.) : To display compass mode screen. (See page 58.) : To display turn list screen. (See page 59.) : To display arrow screen. (See page 59.) : To display freeway information screen. (See page 59.) : To display intersection - 2006 Toyota Sequoia | Navigation Manual - Page 58
and current position, as well as a compass, is displayed on the screen. The destination mark is displayed in the direction of the destination. When driving, refer to the longitude and latitude coordinates and the compass, to make sure that your vehicle is headed in the direction of the destination - 2006 Toyota Sequoia | Navigation Manual - Page 59
list screen (e) Arrow screen (f) Freeway information screen The screen shows the turn list. You cannot scroll through the list of roads. The screen shows the current road name and the distance to the next corner. This screen - 2006 Toyota Sequoia | Navigation Manual - Page 60
GUIDANCE INFORMATION When you drive on a freeway, the screen is automatically divided into two parts, with freeway information screen on the right side. (g) Intersection guidance screen/guidance screen on freeway D Intersection guidance screen This screen automatically appears when the vehicle - 2006 Toyota Sequoia | Navigation Manual - Page 61
destination are displayed. When the vehicle is not on the guidance route, the distance to and the direction of the destination are displayed. When driving on the guidance route and more than one destination is set, the distance and the estimated travel time from current position to each destination - 2006 Toyota Sequoia | Navigation Manual - Page 62
down to 150 feet (50 m). INFORMATION D If the map or the current position is moved to the area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one way street is displayed by . D It is not possible to - 2006 Toyota Sequoia | Navigation Manual - Page 63
DESTINATION INPUT AND ROUTE GUIDANCE 2. Using an eight-direction arrow, move the cursor to the position of the building you wish to display information. 3. Touch the "Building Info." switch. 4. Details of POIs in some buildings may be displayed. If you wish to see detailed POI information, touch - 2006 Toyota Sequoia | Navigation Manual - Page 64
DESTINATION INPUT AND ROUTE GUIDANCE 64 - 2006 Toyota Sequoia | Navigation Manual - Page 65
screen on freeway ...Street name on scroll map ...Display of building shape ...Screen layout function ...POI category change (Show POI Icons) ...Delete previous point ...Map color ...Screen animation ... 65 - 2006 Toyota Sequoia | Navigation Manual - Page 66
ADVANCED FUNCTIONS Suspending and resuming guidance D To suspend guidance You can suspend route guidance. D To resume guidance You can resume the suspended route guidance. The screen will return to the current position map without route guidance. Push the "MENU" button to display the "Menu" - 2006 Toyota Sequoia | Navigation Manual - Page 67
screen is changed to other screens. "Adaptive Volume Control": If you turn the "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km/h). To turn the "Adaptive Volume Control" system on, touch the switch. The indicator will be highlighted - 2006 Toyota Sequoia | Navigation Manual - Page 68
your desired "User number". The confirmation screen will appear. To register, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. When you touch the switch already registered, this screen appears. To replace, touch the "Yes" switch. To cancel the - 2006 Toyota Sequoia | Navigation Manual - Page 69
ADVANCED FUNCTIONS D To change user D To delete user Push the "MENU" button to display the "Menu" screen. Then touch the "Select User" switch. Touch the "User wish to change. number" switch you Touch the "Delete" switch of "User number" you wish to delete. The above message appears, then the - 2006 Toyota Sequoia | Navigation Manual - Page 70
input a destination. (a) Registering memory points The confirmation screen appears. To delete, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. 70 - 2006 Toyota Sequoia | Navigation Manual - Page 71
ADVANCED FUNCTIONS 2. Touch the "Register" switch of the "Memory Points". A screen similar to the destination input screen appears. Input the desired point in the same way as inputting a destination. (See page 24.) When you finish memory point registration, the memory point data screen will appear - 2006 Toyota Sequoia | Navigation Manual - Page 72
ADVANCED FUNCTIONS (b) Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. 2. Touch the "Edit" switch of the "Memory Points". The - 2006 Toyota Sequoia | Navigation Manual - Page 73
ADVANCED FUNCTIONS D To change "Icon" Touch the desired icon. You can turn the page by touching "Page 1", "Page 2" or "With Sound" switch. "With Sound": To display sound icons. When your vehicle approaches the memory point, the sound - 2006 Toyota Sequoia | Navigation Manual - Page 74
of the memory points as Home or Quick access 1 to 5. To replace the attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the desired attribute. It is possible to replace a registered attribute. To delete the attribute, touch the switch. "Del - 2006 Toyota Sequoia | Navigation Manual - Page 75
D To change "Name" D To change "Location" To delete an attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the alphabet and/or numeral keys. When the entry has been completed, touch the "OK" switch on the screen. The previous screen will - 2006 Toyota Sequoia | Navigation Manual - Page 76
ADVANCED FUNCTIONS D To change "Phone #" (telephone number) (c) Deleting memory points 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. Touch numeral keys. When the entry has been completed, touch the "OK" switch on the screen. The previous screen will be - 2006 Toyota Sequoia | Navigation Manual - Page 77
switch to display the following screen. (a) Registering area to avoid 1. Touch the "Register" switch of the "Areas to avoid". 3. Set the cursor in the center of the area to avoid, and touch the "Enter" switch. 2. Enter the location in the same way as inputting a destination, or display the map of - 2006 Toyota Sequoia | Navigation Manual - Page 78
1. Touch the "Edit" switch of the "Areas to Avoid" to display the "Edit Area to Avoid" screen. 4. Touch either or switch to change the size of the area to avoid. 3. Touch the "Name" , "Location" or "Area Size" switch on this screen. 2. To edit an area to avoid, touch the corresponding switch. 78 - 2006 Toyota Sequoia | Navigation Manual - Page 79
To change "Name" D To change "Location" D To change "Area size" Touch alphabet or numeral keys. When the entry has been completed, touch will be displayed. Touch either or switch to change the size of area you want to avoid, and touch the "OK" switch. The previous screen will be displayed. - 2006 Toyota Sequoia | Navigation Manual - Page 80
vehicle position mark manually. "Distance": You can select "km" or "miles" as the distance unit. "Estimated Travel Time": You can set the system to display the travel time to the destination on the route guidance screen. "Auto Reroute": You can set the system to automatically search for a new - 2006 Toyota Sequoia | Navigation Manual - Page 81
color. "Screen Animation": You can set some screen displays to be animated. Current position calibration When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually the navigation system" on page 10. 81 - 2006 Toyota Sequoia | Navigation Manual - Page 82
D Tire change calibration The tire change calibration function will be used when replacing the tires. This function will adjust the mis-calculation caused by the circumference appears and the quick distance calibration is automatically started. A few seconds later, a map screen will be displayed. - 2006 Toyota Sequoia | Navigation Manual - Page 83
ADVANCED FUNCTIONS Distance unit 1. Push the "MENU" button. Estimated travel time You can set the speed that is used for the calculation of the estimated travel time. 2. Touch the "Setup" switch. 3. Touch the "km" or "miles" switch of "Distance" to choose the distance unit. The selected switch - 2006 Toyota Sequoia | Navigation Manual - Page 84
D It is possible to display up to 99 hours 59 minutes. 2. Touch the "Setup" switch. 4. Touch or to set the average vehicle speeds for driving on a Freeway, Main street, and Residential. To set the default speeds, touch the "Default" switch. 5. When you finish setting the desired speeds, touch the - 2006 Toyota Sequoia | Navigation Manual - Page 85
Auto reroute When the "Auto Reroute" feature is turned on, the system will automatically search for a new route to the destination if you stray from the guidance route. This feature does not operate while you are driving on roads where guidance is not available. To turn the "Auto Reroute" mode on - 2006 Toyota Sequoia | Navigation Manual - Page 86
Auto voice guidance When the "Auto Voice Guidance" feature is turned on, the voice guidance can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance can be heard only if you push the "MAP/ VOICE" button. To turn the "Auto Voice Guidance" mode on: 1. Push - 2006 Toyota Sequoia | Navigation Manual - Page 87
on, you can hear the voice guidance in all modes. When the "Voice Guidance in All Modes" feature is turned off, voice guidance cannot be heard when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 3. Touch the "On" switch of "Auto Voice Guidance - 2006 Toyota Sequoia | Navigation Manual - Page 88
Notifying traffic restriction When the "Notify Traffic Restriction" feature is turned on, the system notifies you of traffic or seasonal restrictions. 3. Touch the "On" switch of "Voice Guidance in All Modes" and touch the "OK" switch. To turn the "Notify Traffic Restriction" mode on: 1. Push the - 2006 Toyota Sequoia | Navigation Manual - Page 89
ADVANCED FUNCTIONS Intersection guidance When the "Intersection Guidance" feature is turned on, the system will display the intersection guidance screen if you drive with route guidance. 3. Touch the "On" switch of "Notify Traffic Restriction" and touch the "OK" switch. 2. Touch the "Setup" - 2006 Toyota Sequoia | Navigation Manual - Page 90
ADVANCED FUNCTIONS Guidance screen on freeway When the "Guidance Screen on Freeway" feature is turned on, the system will display the lane guidance screen if you drive on a freeway with route guidance. 3. Touch the "On" switch of "Intersection Guidance" and touch the "OK" switch. 2. Touch the " - 2006 Toyota Sequoia | Navigation Manual - Page 91
ADVANCED FUNCTIONS Street name on scroll map When the "Street Name on Scroll Map" feature is turned on, the system will display the name of a street where the cursor is positioned on the scroll map. 3. Touch the "On" switch of "Guidance Screen on Freeway" and - 2006 Toyota Sequoia | Navigation Manual - Page 92
ADVANCED FUNCTIONS Display of building shape When the "Display Building Shape" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to 300 feet (100 m). 3. Touch the "On" switch of "Street - 2006 Toyota Sequoia | Navigation Manual - Page 93
ADVANCED FUNCTIONS Screen layout function Function) ( You can set display or hide each switch and current street name on the map screen. 1. Push the "MENU" button. 3. Touch the "On" switch of "Display Building Shape" and touch the "OK" switch. 3. Touch the "Change" switch of the " Function". 2. - 2006 Toyota Sequoia | Navigation Manual - Page 94
ADVANCED FUNCTIONS POI category change (Show POI Icons) You can choose 6 icons displayed on the "Show POI Icons" top screen, so that you can easily set which icons to display on the map screen. 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. 3. - 2006 Toyota Sequoia | Navigation Manual - Page 95
ADVANCED FUNCTIONS Delete previous point You can delete your previous destination. 1. Push the "MENU" button. 5. Touch the switch corresponding to the desired category. Then touch the "OK" switch. 2. Touch the "Setup" switch. Then touch switch twice to display page 3 of the "Setup" screen. 3. - 2006 Toyota Sequoia | Navigation Manual - Page 96
ADVANCED FUNCTIONS Map color 1. Push the "MENU" button. 4. Touch the switch you want to delete. For efficient previous point search, previous points can be sorted by the "Date" or " - 2006 Toyota Sequoia | Navigation Manual - Page 97
FUNCTIONS Screen animation When the "Screen Animation" feature is turned on, some switches and screens become animated. (e.g.: change map guidance on the map screen) To turn the "Screen Animation" mode on: 1. Push the "MENU" button. 3. Touch the desired color for day and/or night map and then - 2006 Toyota Sequoia | Navigation Manual - Page 98
ADVANCED FUNCTIONS 98 - 2006 Toyota Sequoia | Navigation Manual - Page 99
OTHER FUNCTIONS SECTION OTHER FUNCTIONS Other functions IV 100 105 112 114 Maintenance information ...Calendar with memo ...Screen adjustment ...Screen setting ... 99 - 2006 Toyota Sequoia | Navigation Manual - Page 100
This system informs you when to replace certain parts or components and shows dealer information (if registered) on the screen. (See "Information items" on page 101.) When the navigation system begins operating after either the information item's pre-set data arrives or the driving distance - 2006 Toyota Sequoia | Navigation Manual - Page 101
to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions, the actual date and distance may differ from the stored date and distance in the system. Rotate tires Replace tires Replace battery Replace brake linings Replace wiper blades 101 - 2006 Toyota Sequoia | Navigation Manual - Page 102
Replace engine coolant You can register the dealer name, staff, location and phone number. Replace brake fluid Replace ATF 2. Enter the location of the dealer in the same way as for destination input. (See page 24.) 1. Touch the "Set Dealer" switch on the "Maintenance" screen. Replace air filter - 2006 Toyota Sequoia | Navigation Manual - Page 103
OTHER FUNCTIONS (b) Edit dealer After you input the dealer, the screen changes and displays the map location of the dealer. If it is OK, touch the "Enter" switch. The screen changes to "Edit Dealer" screen. (See "(b) Edit dealer".) You can edit the dealer name, staff, location and phone number. - 2006 Toyota Sequoia | Navigation Manual - Page 104
OTHER FUNCTIONS D To edit "Dealer" or "Contact" D To edit "Location" D To edit "Phone #" (telephone number) To input the name, touch the alphabet, numeral and/or umlaut keys. You can input up to 24 letters. After inputting, touch the "OK" switch at the bottom right of the screen. The previous - 2006 Toyota Sequoia | Navigation Manual - Page 105
, touch the "Yes" switch. To cancel the deletion, touch the "No" or "Back" switch. Touch the "Enter " switch on the "Set Dealer" screen. The screen be displayed when the navigation system is in operation. The memo information screen will appear every time the system is turned on. To disable this - 2006 Toyota Sequoia | Navigation Manual - Page 106
OTHER FUNCTIONS (a) Inputting a memo To display the "Information Menu" screen, push the "INFO" button. Then touch the "Calendar" switch. The current date is circled in yellow. If the current date is not displayed on the screen, touch the "Today" switch to display the current month calendar. 1. - 2006 Toyota Sequoia | Navigation Manual - Page 107
OTHER FUNCTIONS D Memo D Location Touch the "Memo" switch to enter text. Enter text using the keys. You can enter text up to 24 letters. After entering the text, touch the "OK" switch at the bottom right of the screen. Touch the "Location" switch to set location. A screen similar to the - 2006 Toyota Sequoia | Navigation Manual - Page 108
OTHER FUNCTIONS D Mark color D Date color The date inputted is marked as shown above. You can choose the desired mark and/or date color. Touch the "Mark" switch. Touch the "Date" switch. Touch your desired color for the mark. 108 - 2006 Toyota Sequoia | Navigation Manual - Page 109
mark and/or date for the date you added the memo and/or location. To default the date color, touch the "Delete" switch on the screen. After you choose the date and/or mark color, touch the "OK" switch to display the previous screen. To add a memo, touch the corresponding date. The - 2006 Toyota Sequoia | Navigation Manual - Page 110
OTHER FUNCTIONS (d) Editing a memo (e) Memo list To edit a memo, touch the corresponding date, and then touch the memo you wish to edit. Touch the switch. "Memo" or "Location" 1. To list the memos you added, touch the "List" switch. 110 - 2006 Toyota Sequoia | Navigation Manual - Page 111
OTHER FUNCTIONS 2. Touch the desired search condition to list the memos. The "Memo list" is displayed on the screen. To display the memos listed in a desired period, touch the "Period" switch. Touch the number keys. After setting the period, touch the "OK" switch. The "Memo list" screen will be - 2006 Toyota Sequoia | Navigation Manual - Page 112
display off. To display the "Display" screen push the "DISPLAY" button. The screen goes off when you touch the "SCREEN OFF" switch. To turn the display screen back on, push any button such as "INFO", etc. The selected screen appears. INFORMATION When you do not touch any switch on the screen for - 2006 Toyota Sequoia | Navigation Manual - Page 113
" screen goes off. Color and tone adjustment (with rear seat entertainment system) You can adjust the color and the tone while the DVD video, DVD audio and video CD are being played. "COLOR" "RED": Strengthens the red color of the screen. "COLOR" "GREEN": Strengthens the green color of the screen - 2006 Toyota Sequoia | Navigation Manual - Page 114
"INFO" button to display the "Information Menu" screen. (a) Automatic transition You can select a function that enables automatic return to the navigation screen from the audio screen. (b) Background color You can select a background color. 2. Touch the "Screen Setting" switch. Select "ON" or - 2006 Toyota Sequoia | Navigation Manual - Page 115
AUDIO SYSTEM SECTION AUDIO SYSTEM Audio system V Quick reference ...116 Using your audio system ...117 Audio system operating hints ...144 V 115 - 2006 Toyota Sequoia | Navigation Manual - Page 116
SYSTEM Quick reference 1 2 3 4 5 6 7 Function switch display screen Touch the switches displayed on the screen to control the radio and disc players. For details, see page 118. "TUNE" knob Turn " button Push this button to turn the compact disc player and DVD player on. For details, see pages - 2006 Toyota Sequoia | Navigation Manual - Page 117
To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. (a) Turning the system on and off "PWR·VOL": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume. The system turns on in the - 2006 Toyota Sequoia | Navigation Manual - Page 118
come on again. The switches for radio, compact disc player and DVD player (with rear seat entertainment system) operation are displayed on the function switch display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected switch is highlighted - 2006 Toyota Sequoia | Navigation Manual - Page 119
SYSTEM oil any part of the compact disc player. Do not insert anything other than compact discs into the slot. The player is intended for use with 12 cm (4.7 in.) discs only. Touching the "SOUND" switch displayed on the screen at the audio control mode will display the sound control - 2006 Toyota Sequoia | Navigation Manual - Page 120
Your DVD player (with rear seat entertainment system) You can enjoy the sound of the rear seat entertainment system by pushing the "DISC" button. - Radio operation (a) Listening to the radio Push these buttons to choose either an AM or FM station. "AM", "FM1" or "FM2" appears on the screen. Turn - 2006 Toyota Sequoia | Navigation Manual - Page 121
automatically Systems (RDS). RDS mode allows you to receive text messages from radio stations that utilize RDS transmitters. When RDS is on, the radio can - only select stations of a particular program type, - display messages from radio stations, - search for a stronger signal station. RDS features - 2006 Toyota Sequoia | Navigation Manual - Page 122
) D Easy Lis (Easy listening) D Cls/Jazz (Classical music and Jazz) D R & B (Rhythm and Blues) D Religion D Alert (Emergency message) "TYPE SEEK" switch When a program is set, "TYPE SEEK" switch appears. Touch the switch and the system starts to seek the station in the relevant program type. If any - 2006 Toyota Sequoia | Navigation Manual - Page 123
player will automatically start when you insert the compact disc. At this time, "CD" appears on the screen. If the label faces down, the disc cannot be played. In this case, "CD CHECK braking or in an accident. D To reduce the chance of injury in case of an accident or sudden stop while driving, - 2006 Toyota Sequoia | Navigation Manual - Page 124
not obstruct the display while it is moving. It could damage your audio system. To stop and eject the compact disc, push the "OPEN" button to lower the display. Push the " button. "DISC INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder - 2006 Toyota Sequoia | Navigation Manual - Page 125
loaded in the slot. "CD" appears on the screen. Vehicles with rear entertainment system - If the DVD player is turned on, push the "DISC" button again to switch to the compact disc player. If the rear seat entertainment system is on, pushing the "DISC" button switches the sound of the front audio - 2006 Toyota Sequoia | Navigation Manual - Page 126
audio signals of the disc cannot be read or the system has trouble. Push the "DISC" button once again. If the player does not operate, check that the disc surface is not soiled or damaged. If the disc is O.K., the temperature of the player's internal mechanism may be raised because of high external - 2006 Toyota Sequoia | Navigation Manual - Page 127
CD, CD text, dts-CD or DVD audio only when a disc is loaded in the DVD player. Refer to "Rear seat entertainment system" for details. For appropriate discs for this player, see "Audio system operating hints" on page 144. (a) Inserting the disc 1. Pull up the console box lid while pushing the lock - 2006 Toyota Sequoia | Navigation Manual - Page 128
loaded in the same manner as for 12 cm (4.7 in.) discs. 4. Slide the lid forward to close the DVD player. The indicator light turns on while the disc is loaded. NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot. 5. Close the - 2006 Toyota Sequoia | Navigation Manual - Page 129
chance of injury in case of an accident or a sudden stop, always keep the console box closed while driving. (c) Playing a disc Push the "DISC" button if a disc is already loaded in the player. "DVD" appears on the screen. (If the CD player is turned on, push the "DISC" button again to switch to the - 2006 Toyota Sequoia | Navigation Manual - Page 130
pass, normal play resumes. OTHER FUNCTIONS "RPT" switch: Use it for automatic repeat of the track you are currently listening to. Touch the switch while the track is playing. When the track is finished, the player will automatically go back to the beginning of the track and play the track again. To - 2006 Toyota Sequoia | Navigation Manual - Page 131
SYSTEM (e) Operating a DVD video disc NOTE: The playback condition of some DVD video discs may be determined by a DVD video software producer. This DVD player plays a disc as the software producer intended. So some functions may not work properly. Be sure to read the instruction manual for the DVD - 2006 Toyota Sequoia | Navigation Manual - Page 132
SYSTEM DVD video DVD video DVD audio DVD audio PLAYING A DVD DISC Push the "AUDIO" button to display this screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING DVD CONTROLS If you touch a part - 2006 Toyota Sequoia | Navigation Manual - Page 133
AUDIO SYSTEM "Hide Keys" switch: Touching this will turn off the controls from the screen. If " " appears on the screen when you touch a control, the operation relevant to the control is not permitted. DESCRIPTION OF DVD CONTROLS D Top page of DVD video controls "Menu" and "Top Menu": If you touch - 2006 Toyota Sequoia | Navigation Manual - Page 134
. When you touch " - 2006 Toyota Sequoia | Navigation Manual - Page 135
AUDIO SYSTEM SELECTING THE BONUS GROUP DVD " switch on the screen. The player starts playing the disc from the selected bonus group number. CHANGING THE STILL PICTURE DVD audio only - Touch the "Still turn off the subtitle, touch "Hide". When you touch "Back", the previous screen returns. V 135 - 2006 Toyota Sequoia | Navigation Manual - Page 136
AUDIO SYSTEM CHANGING THE AUDIO LANGUAGE DVD video only - Each time you touch "Audio", the language is selected from the ones stored in the discs and changed. When you touch "Back", the previous screen returns. CHANGING THE AUDIO FORMAT DVD audio only Each time you touch "Audio", another audio - 2006 Toyota Sequoia | Navigation Manual - Page 137
Back" switch. D DVD language You can change the language on the DVD video menu. 1. Touch "DVD Language". 2. Touch the language you want to read on the "Select DVD the "Setup Menu 1" screen, touch the "Back" switch. D Angle mark The multi-angle mark can be turned on or off on the screen while the disc - 2006 Toyota Sequoia | Navigation Manual - Page 138
SYSTEM 1. Touch "Parental". 2. Enter the 4-digit personal code on the "Enter personal code" screen. If you enter the wrong numbers, touch "Clear" to delete the numbers. 10 touches of "Clear" will initialized the personal code. To return to the "Setup Menu 1" screen, touch the "Back Select DVD - 2006 Toyota Sequoia | Navigation Manual - Page 139
AUDIO SYSTEM 0209 0214 0215 0218 0301 0315 0319 0325 0401 0426 0515 0520 0521 0601 0609 0610 0615 0625 0701 0704 0712 Bislama Bengali Tibetan Breton - 2006 Toyota Sequoia | Navigation Manual - Page 140
AUDIO SYSTEM 1513 1518 1601 1612 1619 1721 1813 1814 1815 1823 1901 1904 1907 1908 1909 1911 1912 1913 1914 1915 1917 (Afan)Oromo Oriya Panjabi - 2006 Toyota Sequoia | Navigation Manual - Page 141
player is playing video, the next track is searched and played. "Main/Sub" switch: A multiplex transmission changing switch. The mode changes from Main/Sub to Main, to Sub and back the parking brake is applied, the video screen returns. V DISPLAYING OPERATION SWITCHES If you touch the part where - 2006 Toyota Sequoia | Navigation Manual - Page 142
on the "SEEK/TRACK" button. Touch "Back", and the previous screen returns. (g) If the player malfunctions If the player or another unit equipped with the player malfunction, your audio system will display one of the three following messages. If "DISC CHECK" appears on the display: It indicates that - 2006 Toyota Sequoia | Navigation Manual - Page 143
angles. Multi-language feature: You can select a language of the subtitle and audio. Region codes: The region codes are provided on DVD players and DVD discs. If the DVD video disc does not have the same region code as the DVD player, you cannot play the disc on the DVD player. For region codes - 2006 Toyota Sequoia | Navigation Manual - Page 144
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. "DTS" is a trademark of Digital Theater Systems, Inc - 2006 Toyota Sequoia | Navigation Manual - Page 145
electrical motors. This results in static. CARING FOR YOUR COMPACT DISC PLAYER, DVD PLAYER AND DISCS D Your compact disc player is intended for use with 12 cm (4.7 in.) discs only. D Extremely high temperatures can keep your compact disc player and DVD player from working. On hot days, use the air - 2006 Toyota Sequoia | Navigation Manual - Page 146
SYSTEM Audio CDs DVD video discs DVD audio discs Video CDs " Special shaped discs " Low quality discs DVD player D Use only discs marked as shown above. The following products may not be playable on your DVD player. SACD Copy-protected CD CD-R (CD-Recordable) CD-R W (CD-Re-writable) CD-ROM DVD - 2006 Toyota Sequoia | Navigation Manual - Page 147
light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away from moisture, heat, and direct sunlight. To clean a compact disc: Wipe it with a soft, lint-free cloth that has been dampened with water. Wipe in a straight line from the center - 2006 Toyota Sequoia | Navigation Manual - Page 148
AUDIO SYSTEM 148 - 2006 Toyota Sequoia | Navigation Manual - Page 149
close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching a fork or intersection. These voice instructions will help you keep your - 2006 Toyota Sequoia | Navigation Manual - Page 150
others. Initial screen When you start the engine or turn the ignition switch to the "ACC" position, the initial screen appears and the system begins operating. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few seconds, the "CAUTION - 2006 Toyota Sequoia | Navigation Manual - Page 151
Read the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow others to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when you start driving. Unavailable switches are - 2006 Toyota Sequoia | Navigation Manual - Page 152
, late or non-voice guidance. The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before you follow any instruction from the system, look to see whether you can comply with the - 2006 Toyota Sequoia | Navigation Manual - Page 153
v - 2006 Toyota Sequoia | Navigation Manual - Page 154
- Quick reference North-up or heading-up symbol This symbol indicates a map view with north-up or heading-up. Touching this symbol changes the map orientation...9 2 Scale indicator This figure indicates the map scale...9 3 "INFO" button Push this button to display the "Information Menu" screen...ii, - 2006 Toyota Sequoia | Navigation Manual - Page 155
, 20, 65 16 Distance and time to destination Displays the distance and the estimated travel time to the destination...61 17 "GPS" mark (Global Positioning System) Whenever your vehicle is receiving signals from the GPS, this mark is displayed...10 15 xiii - 2006 Toyota Sequoia | Navigation Manual - Page 156
select one of the many POIs (Points of Interest) that have already been stored in the system's database...30 3 "POI Category" switch You can select a destination from the POI category of the three categories of emergency service points that have been already stored in the system's database...36 xiv - 2006 Toyota Sequoia | Navigation Manual - Page 157
"Map" switch You can select a destination simply by touching the location on the displayed map...38 8 "Intersection" switch You can enter the names of two intersecting streets. This is helpful if you do not know the specific street address of your destination but know the general vicinity...39 9 " - 2006 Toyota Sequoia | Navigation Manual - Page 158
the following operations. 1 "Map DVD" switch Displays information regarding the disc version or covered area...12 2 "Select User" switch Enables recall of up to three memorized user setting patterns...67 3 "Setup" switch Enables various settings for the navigation system...80 4 "My Places" switch