2007 Toyota Highlander Navigation Manual
2007 Toyota Highlander Manual
2007 Toyota Highlander manual content summary:
- 2007 Toyota Highlander | Navigation Manual - Page 1
before operation I Touch switch operation ...2 Inputting letters and numbers ...2 Current position display ...4 Screen scroll operation (one−touch scroll) ...5 Map scale ...8 Orientation of the map ...9 Limitations of the navigation system ...9 Map database information and updates ...12 - 2007 Toyota Highlander | Navigation Manual - Page 2
operation This system is operated mainly by the switches on the screen. To prevent damage to the screen, lightly touch switches on the screen with your finger. When you touch a switch on the screen, a beep sounds. Do not use objects other than your finger to touch the screen. Inputting letters and - 2007 Toyota Highlander | Navigation Manual - Page 3
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. To shift to the next or previous page. To scroll up or down one item at a time. This expresses a displayed screen - 2007 Toyota Highlander | Navigation Manual - Page 4
the current position manually, see page 81. The current vehicle position mark appears in the center or bottom center of the map screen. You can return to this map screen showing your current position at any time from any screen by pushing the "MAP" button. During driving, the current vehicle - 2007 Toyota Highlander | Navigation Manual - Page 5
the screen. When you push the "MAP" button, the current vehicle position mark returns to Touch the "Enter " switch. The screen changes and displays the map location of the selected destination, touch the "Add to " switch or the "Replace " switch. When there is already a preset destination, using - 2007 Toyota Highlander | Navigation Manual - Page 6
"Mark" switch, the following screen appears for a few seconds, and then the map screen returns. The registered point is shown by on the map. To change the icon or name, etc., see page 72. You can register up to 106 memory points. If you attempt to register more than 106, a message - 2007 Toyota Highlander | Navigation Manual - Page 7
the "Enter " switch, the position of cursor is set as a destination. If there is already a preset destination, the "Add to " switch and the "Replace " switch are displayed. When there is already a preset destination, using the "Add to " switch to set an additional destination, will set the new one - 2007 Toyota Highlander | Navigation Manual - Page 8
a set destination, the "Add to " switch and the "Replace " switch are displayed. When there is already a preset destination, switch, the scale bar changes smoothly. You can change the scale of the map display by touching the scale bar directly. It is not available during driving. The map scale is - 2007 Toyota Highlander | Navigation Manual - Page 9
BASIC FUNCTIONS Orientation of the map You can change the orientation of the map from north−up is always up. A red arrow indicates North. Limitations of the navigation system This navigation system calculates the current vehicle position using satellite signals, various vehicle signals, map - 2007 Toyota Highlander | Navigation Manual - Page 10
systems. panel may change of direction by D D D D D D going forward and backward, or turning on a turntable in the parking lot. When leaving a covered parking lot or parking garage. When a roof carrier is installed. When driving with tire chains installed. When the tires are worn. After replacing - 2007 Toyota Highlander | Navigation Manual - Page 11
, you can correct the current position manually. For information on setting the current system may not be complete or may not be the latest version. After replacing the tire, implement the operation described in the "D Tire change calibration". (For details, see page 82.) This navigation system - 2007 Toyota Highlander | Navigation Manual - Page 12
, THE "DATABASE"), USED IN THE NAVIGATION SYSTEM. BY USING THE NAVIGATION SYSTEM AND THE DATABASE, YOU ACCEPT AND AGREE TO Agreement. You shall not alter, obscure or remove any copyright notices, trademark notices or other restrictive any part of the DATABASE without the prior written consent of TANA - 2007 Toyota Highlander | Navigation Manual - Page 13
reverse engineer any portion of the DATABASE. TRANSFER You many not transfer the DATABASE to third parties, except together with the system for OF THE DATABASE, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS INTERRUPTION OR THE LIKE, REGARDLESS OF WHETHER - 2007 Toyota Highlander | Navigation Manual - Page 14
the passage of time, changing circumstances, and due to or grade; bridge height, weight or other limits; road in whole or in part by the United States commercial items clause); FAR 52.227−14 Alternates I, II, and III (JUN 1987) the Government's rights shall control. Contractor/manufacturer is Tele - 2007 Toyota Highlander | Navigation Manual - Page 15
CAREFULLY BEFORE USING THIS NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided by infoUSA Inc. or reverse engineer any portion of the POI Data. 3. TRANSFER You may not transfer the POI Data to third parties, except together with the system for which - 2007 Toyota Highlander | Navigation Manual - Page 16
Only. You agree to use this information for solely personal, non− commercial purposes, and not for service bureau, time−sharing or other similar purposes. You may not modify the information or remove any copyright notices that appear on the information in any way. You may not decompile, disassemble - 2007 Toyota Highlander | Navigation Manual - Page 17
navigation system for the solely personal, non−commercial purposes for which you were licensed, and not for service bureau, remove any copyright notices that appear and do not modify the Data in any way. You agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer - 2007 Toyota Highlander | Navigation Manual - Page 18
(a) use this Data with any products, systems, or applications installed or otherwise connected to information due to the passage of time, changing circumstances, sources used and the nature of CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF [CLIENT] OR ITS LICENSORS - 2007 Toyota Highlander | Navigation Manual - Page 19
BASIC FUNCTIONS Export Control. You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export - 2007 Toyota Highlander | Navigation Manual - Page 20
Notice" at FAR 52.227−14(g)(2) (Alternate II), which shall be affixed to the NAVTEQ NAVTEQ Data, in whole or in part): LIMITED RIGHTS NOTICE (JUN 1987) These LLC prior to seeking additional or alternative rights in the NAVTEQ Data. locations are often changed. In some places, construction on roads - 2007 Toyota Highlander | Navigation Manual - Page 21
FUNCTIONS D To confirm the database version and disc coverage area 1. Push the "MENU" button. To display the disc coverage area, touch the "Covered Area" switch. Confirm the covered area on the screen. Contact your dealer to find out if there is a more recent update released. The map database is - 2007 Toyota Highlander | Navigation Manual - Page 22
BASIC FUNCTIONS 22 - 2007 Toyota Highlander | Navigation Manual - Page 23
Destination input by Quick access ...Destination input by "Address" ...Destination input by "POI Name" ...Destination input by "POI Category" ...Destination input by "Emergency" ...Destination input by "Memory" ...Destination input by "Previous" ...Destination input by "Map" ...Destination input by - 2007 Toyota Highlander | Navigation Manual - Page 24
input - Push the "DEST" button and the "Destination" screen appears. D Route guidance may not be available if there is no road data for the specified location. D When setting the destination on a map with a scale larger than 0.5 mile (800 m), the map scale changes are driving, be sure to obey traffic - 2007 Toyota Highlander | Navigation Manual - Page 25
DESTINATION INPUT AND ROUTE GUIDANCE U.S.A. Switch "US1" "US2" States included in the search area Idaho Oregon Washington California Nevada Arizona Colorado Montana New Mexico Utah Wyoming Iowa - 2007 Toyota Highlander | Navigation Manual - Page 26
input by Home - Destination input by Quick access - Destination input by "Address" There are 2 ways to input a destination by address. Touch the "Address" switch on the "Destination" screen. Touch the home switch on the "Destination" screen. The screen changes while driving. INFORMATION Guidance starts - 2007 Toyota Highlander | Navigation Manual - Page 27
name first. Touch the "Street" switch to display the screen for inputting a street name. When you find your desired street name, touch the corresponding switch. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination - 2007 Toyota Highlander | Navigation Manual - Page 28
to search Touch the "City" switch. Select or enter your desired city. "Input Name": To narrow down the listed items by inputting the city name. If you input a street name first, the screen changes. You can then input the house number. To search by city, the following three methods are possible - 2007 Toyota Highlander | Navigation Manual - Page 29
name. If you have not used the navigation yet, no cities will be displayed on the screen. The current screen changes to the screen for inputting a house number or a street name. (See page 27.) Input a city name. Touch the switch of the desired city name from the displayed list. The current screen - 2007 Toyota Highlander | Navigation Manual - Page 30
display the selected destination and the route preference. (See " - Entering destination" on page 42.) The current screen changes to the screen for inputting a house number or a street name. (See page 27.) Input the name of Point of Interest. Touch the switch of the desired destination. The screen - 2007 Toyota Highlander | Navigation Manual - Page 31
from the categories".) To search by city, the following three methods are possible. 1. Selecting from the last 5 cities 2. Selecting from the nearest 5 cities 3. Inputting the city name Touch the switch of the desired city name. If you have not used the navigation yet, no cities will be displayed - 2007 Toyota Highlander | Navigation Manual - Page 32
DESTINATION INPUT AND ROUTE GUIDANCE SELECTING FROM THE NEAREST 5 CITIES Touch the "Nearest 5 Cities" switch. INPUTTING THE CITY NAME Touch the "Input City Name" switch. Touch the switch of the desired city name from the displayed list. Input the city name. Touch the switch of the desired city - 2007 Toyota Highlander | Navigation Manual - Page 33
AND ROUTE GUIDANCE (b) Selecting from the categories Touch the - Destination input by "POI Category" The destination can be set by selecting the POI category and the search point. Touch the "POI Category" switch on the "Destination" - 2007 Toyota Highlander | Navigation Manual - Page 34
of POIs located within approximately 20 miles (30 km) from the selected search point. Touch the "Search Point" switch. INPUTTING CITY CENTER Touch the "Input City Center" switch. Input the city center name. Touch the desired POI category from the list. The selected category icon appears on the - 2007 Toyota Highlander | Navigation Manual - Page 35
DESTINATION INPUT AND ROUTE GUIDANCE SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch the "Current Position" switch. SETTING THE SEARCH POINT VIA THE MAP SCREEN Touch - 2007 Toyota Highlander | Navigation Manual - Page 36
the listed POI names. - Destination input by "Emergency" By touching the "Emergency" switch on the "Destination" screen, the display changes to a screen to select dealers, hospitals or police stations. During driving, only nearby police stations, hospitals or dealers are shown. The current position - 2007 Toyota Highlander | Navigation Manual - Page 37
the memory points by the registered attribute. INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page 11.) When you touch the switch of your desired memory point, the screen changes and displays the map location of the selected destination and the - 2007 Toyota Highlander | Navigation Manual - Page 38
. The screen changes and displays the map location that was previously displayed just before the destination input operation and the route preference. (See " - Entering destination" on page 42.) INFORMATION Guidance starts if you touch the "Enter" switch even while driving - 2007 Toyota Highlander | Navigation Manual - Page 39
intersecting streets which are located near the destination to be set. Touch the switch of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 42 - 2007 Toyota Highlander | Navigation Manual - Page 40
Touch the switch of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference In alphabetical order by name. "Input Name": An applicable list is displayed by touching this switch and inputting name. trance" or "Exit". - 2007 Toyota Highlander | Navigation Manual - Page 41
of the selected destination and the route preference. (See " - Entering destination" on page 42.) Input a telephone number. After inputting a telephone number, touch the "OK" switch, and the screen changes and displays the map location of the selected destination and the road preference. (See - 2007 Toyota Highlander | Navigation Manual - Page 42
route guidance - - Entering destination After you input the destination, the screen changes and displays the map location of the selected destination and the route preference. "Replace ": To delete the existing destinations and set a new one. "Change": To change the route preference. (See page 43 - 2007 Toyota Highlander | Navigation Manual - Page 43
INPUT AND ROUTE GUIDANCE D To change the route before starting guidance ROUTE PREFERENCE You can change route preference by touching the "Change on or off by touching the switch. When searching for a route, the system avoids routes where the indicator is dimmed as much as possible. After choosing - 2007 Toyota Highlander | Navigation Manual - Page 44
DESTINATION INPUT AND ROUTE GUIDANCE "Info.": To display the following information about each Ferry This screen displays the route that guides the driver to the destination. The route to the destination is indicated by a highlighted line. Drive along the guided route. When the vehicle approaches a - 2007 Toyota Highlander | Navigation Manual - Page 45
DESTINATION INPUT AND ROUTE GUIDANCE INFORMATION On freeways, interstates or other , and then 3rd exit ahead." "The 3rd exit ahead." "The exit ahead." (Beep sound only) ∗: 2 The system indicates a U−turn if the distance between two one−way roads (of opposite directions) is less than 50 feet (15 - 2007 Toyota Highlander | Navigation Manual - Page 46
DESTINATION INPUT AND ROUTE GUIDANCE INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made early or delayed. D If you did not hear the voice guidance command, touch the "MAP" button to hear it - 2007 Toyota Highlander | Navigation Manual - Page 47
way as the destination input. (See page 24.) (b) Reordering destinations When more than one destination is set, you can change the arrival order When you finish selecting the destinations, touch the "OK" switch. The system searches for the guidance route again, and displays the entire route. Even - 2007 Toyota Highlander | Navigation Manual - Page 48
DESTINATION INPUT AND ROUTE GUIDANCE (c) Deleting destination You can delete a set destination. 1. more than one destination is set, touch the "OK" switch after deleting the destinations. The system searches for the guidance route again, and displays the entire route. Setting and deleting route - 2007 Toyota Highlander | Navigation Manual - Page 49
DESTINATION INPUT AND ROUTE GUIDANCE (b) Deleting preferred road You can delete a set preferred road. 1. Touch the "Route" switch. 3. Select the preferred road which you wish to modify - 2007 Toyota Highlander | Navigation Manual - Page 50
DESTINATION INPUT AND set, touch the "OK" switch after deleting the preferred road. The system searches for the guidance route again, and displays entire route. (c) Search the destination is displayed. "Guide": To start guidance. "Route": To add or change a route. (For details, see pages 46 and 48 - 2007 Toyota Highlander | Navigation Manual - Page 51
DESTINATION INPUT AND ROUTE GUIDANCE (d) Detour setting While the route guidance is operating, you can change the route to detour around a section of route to the destination. This picture shows an example of how the system would guide you around a delay caused by a traffic jam. 1 This position - 2007 Toyota Highlander | Navigation Manual - Page 52
road. (ex. When the route guidance guides the route on the freeway, but you drive on the parallel way along a freeway.) 1. Touch the "Route" switch. 3. You can turn the indicator on or off by touching the switch. When searching for a route, the system avoids routes where the indicator is dimmed as - 2007 Toyota Highlander | Navigation Manual - Page 53
DESTINATION INPUT AND ROUTE GUIDANCE Show POI icons Points of Interest such as Interest on the screen. A screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI, see page 94.) When you touch the desired Point of Interest category, symbols will appear on - 2007 Toyota Highlander | Navigation Manual - Page 54
DESTINATION INPUT AND of Interest, touch this switch. Then choose one of the categories. The system will list the points within 20 miles (30 km). Touch the switch of the cursor, touch the "Enter " switch. The screen changes and displays the map location of the selected destination and route preference. ( - 2007 Toyota Highlander | Navigation Manual - Page 55
DESTINATION INPUT AND ROUTE GUIDANCE Route overview 1. Touch the "Map View" switch. The entire route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (For details, see pages 46 and 48.) "Turn List": The following screen displays - 2007 Toyota Highlander | Navigation Manual - Page 56
DESTINATION INPUT AND ROUTE GUIDANCE Touch the "Map" switch of your desired point. −forward mode. : To stop the preview. : To review the route to the previous destination or starting point. 2. Touch the "Route Preview" switch. : To review the route to the previous destination or starting point in - 2007 Toyota Highlander | Navigation Manual - Page 57
DESTINATION INPUT AND ROUTE GUIDANCE Screen configuration You can choose any one of the screen configurations. Depending on the conditions, it may not be possible to select - 2007 Toyota Highlander | Navigation Manual - Page 58
INPUT AND ROUTE GUIDANCE (b) Dual map (c) Compass mode The screen shows the dual map. The map on the left is the main map. You can edit the right side map by touching any specific point on the right side map. This screen can perform the following procedures. D Changing . When driving, refer - 2007 Toyota Highlander | Navigation Manual - Page 59
DESTINATION INPUT AND ROUTE GUIDANCE (d) Turn list screen (e) Arrow screen (f) Freeway information screen The screen shows the turn list. You cannot scroll through the list of roads. - 2007 Toyota Highlander | Navigation Manual - Page 60
DESTINATION INPUT AND ROUTE GUIDANCE INFORMATION When you drive on a freeway, the screen is automatically divided into two parts, with When touching the the "MAP" button, the intersection guidance screen reappears. switch or pushing When touching the the "MAP" button, the guidance screen on freeway - 2007 Toyota Highlander | Navigation Manual - Page 61
INPUT AND ROUTE GUIDANCE Distance and time to destination INFORMATION When the vehicle is on the guidance route, the distance measured along the route is displayed. Travel time is calculated based the direction of the destination are displayed. When driving on the guidance route and more than one - 2007 Toyota Highlander | Navigation Manual - Page 62
DESTINATION INPUT AND ROUTE GUIDANCE Foot print map For the area which is covered by the foot print map (Some areas in the following cities; Detroit, Chicago, N.Y., L.A), you can switch to the foot print map on a scale of 75 feet (25 m). D To switch to the foot print map switch changes into the The - 2007 Toyota Highlander | Navigation Manual - Page 63
DESTINATION INPUT AND ROUTE GUIDANCE 2. Using an eight−direction arrow, move the cursor to the position of the building you wish to display information. 3. Touch the "Building - 2007 Toyota Highlander | Navigation Manual - Page 64
DESTINATION INPUT AND ROUTE GUIDANCE 64 - 2007 Toyota Highlander | Navigation Manual - Page 65
all modes ...Notifying traffic restriction ...Intersection guidance ...Guidance screen on freeway ...Street name on scroll map ...Display of building shape ...Screen layout function ...POI category change (Show POI Icons) ...Delete previous point ...Map color ...Screen animation ... 65 - 2007 Toyota Highlander | Navigation Manual - Page 66
touch the "Resume Guidance" switch. Push the "MENU" button to display the "Menu" screen and touch the "Suspend Guidance" switch. INFORMATION When you do not have route guidance, the "Suspend Guidance" switch cannot be used. The screen will change to the current position map with route guidance - 2007 Toyota Highlander | Navigation Manual - Page 67
voice guidance. User selection The system can memorize the following settings for button to display the "Menu" screen, and touch the "Volume" switch. INFORMATION During route guidance, the voice guidance continues even if the navigation screen is changed to other screens. "Adaptive Volume Control - 2007 Toyota Highlander | Navigation Manual - Page 68
"Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. When you touch the switch already registered, this screen appears. To replace, touch the "Yes" switch. To cancel the replacement, touch the "No" or "Back" switch. 68 - 2007 Toyota Highlander | Navigation Manual - Page 69
user D To delete user Push the "MENU" button to display the "Menu" screen. Then touch the "Select User" switch. Touch the "User wish to change. number" switch you Touch the "Delete" switch of "User number" you wish to delete. The above message appears, then the map screen will be displayed - 2007 Toyota Highlander | Navigation Manual - Page 70
My places You can register and keep your own memory points (like restaurants, sports facilities, etc.) and use the memory points to input a destination. (a) Registering memory points The confirmation screen appears. To delete, touch the "Yes" switch. To return to the previous screen, touch the - 2007 Toyota Highlander | Navigation Manual - Page 71
ADVANCED FUNCTIONS 2. Touch the "Register" switch of the "Memory Points". A screen similar to the destination input screen appears. Input the desired point in the same way as inputting a destination. (See page 24.) When you finish memory point registration, the memory point data screen will appear - 2007 Toyota Highlander | Navigation Manual - Page 72
(b) Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. 2. Touch the "Edit" switch of the "Memory Points". The screen lists the - 2007 Toyota Highlander | Navigation Manual - Page 73
ADVANCED FUNCTIONS D To change "Icon" Touch the desired icon. You can turn the page by touching "Page 1", "Page 2" or "With Sound" switch. "With Sound": To display sound icons. When - 2007 Toyota Highlander | Navigation Manual - Page 74
ADVANCED FUNCTIONS D To change "Attribute" For easy destination input, set the attribute of the memory points as Home or Quick access 1 to 5. To replace the attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the desired attribute. It is - 2007 Toyota Highlander | Navigation Manual - Page 75
ADVANCED FUNCTIONS D To change "Name" D To change "Location" To delete an attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the alphabet and/ - 2007 Toyota Highlander | Navigation Manual - Page 76
ADVANCED FUNCTIONS D To change "Phone #" (telephone number) (c) Deleting memory points 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. Touch numeral keys. When the entry has been completed, touch the "OK" switch on - 2007 Toyota Highlander | Navigation Manual - Page 77
other reasons can be registered as areas to avoid. Push the "MENU" button to display the "Menu" screen and then touch the "My Places" .) INFORMATION INFORMATION If a destination is inputted in the area to avoid or the route calculation cannot be made without running through the area to avoid, a - 2007 Toyota Highlander | Navigation Manual - Page 78
1. Touch the "Edit" switch of the "Areas to Avoid" to display the "Edit Area to Avoid" screen. 4. Touch either or switch to change the size of the area to avoid. 3. Touch the "Name" , "Location" or "Area Size" switch on this screen. 2. To edit an area to avoid, touch the corresponding switch. 78 - 2007 Toyota Highlander | Navigation Manual - Page 79
"Off" switch. Set the cursor to the desired location, then touch the "Enter" switch. The previous screen will be displayed. Touch either or switch to change the size of area you want to avoid, and touch the "OK" switch. The previous screen will be displayed. 79 - 2007 Toyota Highlander | Navigation Manual - Page 80
1. Push the "MENU" button. 2. Touch the area you wish to delete from the list. "Delete all": To delete all registered areas to avoid in the system. 3. To delete, touch mark manually. "Distance": You can select "km" or "miles" as the distance unit. "Estimated Travel Time": You can set the system to - 2007 Toyota Highlander | Navigation Manual - Page 81
calibration When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 2. Touch the ibration". "Adjust" switch of "Cal- 1. Push the "MENU" button to display - 2007 Toyota Highlander | Navigation Manual - Page 82
current vehicle position mark. Touch the "Enter" switch and the map screen will be displayed. D Tire change calibration The tire change calibration function will be used when replacing the tires. This function will adjust the mis−calculation caused by the circumference difference between the old - 2007 Toyota Highlander | Navigation Manual - Page 83
ADVANCED FUNCTIONS Distance unit 1. Push the "MENU" button. Estimated travel time You can set the speed that is used for the calculation of the estimated travel time. choose the distance unit. The selected switch is highlighted in green. 4. Touch the "OK" switch. 1. Push the "MENU" button. 83 - 2007 Toyota Highlander | Navigation Manual - Page 84
time to the destination is the approximate driving time that is calculated based on the speeds you selected and your 2. Touch the "Setup" switch. 4. Touch or to set the average vehicle speeds for driving on a Freeway, Main street, and Residential. To set the default speeds, touch the "Default - 2007 Toyota Highlander | Navigation Manual - Page 85
operate while you are driving on roads where guidance is not available. To turn the "Auto Reroute" mode on: 1. Push the "MENU" button. 3. Touch the 1. Push the "MENU" button. 2. Touch the "Setup" switch. INFORMATION If your vehicle strays from the guidance route, the system searches for a new route - 2007 Toyota Highlander | Navigation Manual - Page 86
Guidance" feature is turned off, the voice guidance can be heard only if you push the "MAP" button. To turn the "Auto Voice Guidance" mode on: 1. Push the "MENU" button. 3. Touch the "Change" switch. The "Adjust Time Zone" screen appears on the display. 4. Touch the desired time zone. The selected - 2007 Toyota Highlander | Navigation Manual - Page 87
the "Voice Guidance in All Modes" feature is turned off, voice guidance cannot be heard when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 3. Touch the "On" switch of "Auto Voice Guidance". The selected switch is highlighted in green. 2. Touch the - 2007 Toyota Highlander | Navigation Manual - Page 88
restriction When the "Notify Traffic Restriction" feature is turned on, the system notifies you of traffic or seasonal restrictions. 3. Touch the "On" Notify Traffic Restriction" mode on: 1. Push the "MENU" button. 2. Touch the "Setup" switch. Then switch to display page 2 of the touch "Setup" screen - 2007 Toyota Highlander | Navigation Manual - Page 89
ADVANCED FUNCTIONS Intersection guidance When the "Intersection Guidance" feature is turned on, the system will display the intersection guidance screen if you drive with route guidance. 3. Touch the "On" switch of "Notify Traffic Restriction" and touch the "OK" switch. 2. Touch the "Setup" - 2007 Toyota Highlander | Navigation Manual - Page 90
ADVANCED FUNCTIONS Guidance screen on freeway When the "Guidance Screen on Freeway" feature is turned on, the system will display the lane guidance screen if you drive on a freeway with route guidance. 3. Touch the "On" switch of "Intersection Guidance" and touch the "OK" switch. 2. Touch the " - 2007 Toyota Highlander | Navigation Manual - Page 91
FUNCTIONS Street name on scroll map When the "Street Name on Scroll Map" feature is turned on, the system will display the name of a street where the cursor is positioned on the scroll map. 3. Touch "Setup" screen. To turn the "Street Name on Scroll Map" mode on: 1. Push the "MENU" button. 91 - 2007 Toyota Highlander | Navigation Manual - Page 92
ADVANCED FUNCTIONS Display of building shape When the "Display Building Shape" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to the "Setup" screen. To turn the "Display Building Shape" mode on: 1. Push the "MENU" button. 92 - 2007 Toyota Highlander | Navigation Manual - Page 93
display or hide each switch and current street name on the map screen. 1. Push the "MENU" button. 3. Touch the "On" switch of "Display Building Shape" and touch the "OK" switch. 3. Touch the "Change" switch of the " Function". 2. Touch the "Setup" switch. Then switch twice to display page 3 of - 2007 Toyota Highlander | Navigation Manual - Page 94
ADVANCED FUNCTIONS POI category change (Show POI Icons) You can choose 6 icons displayed on the "Show POI . Then switch twice to display page 3 of touch the "Setup" screen. 3. Touch the "Change" switch of "Show POI Icons". 1. Push the "MENU" button. 4. Touch the category switch you wish to - 2007 Toyota Highlander | Navigation Manual - Page 95
ADVANCED FUNCTIONS Delete previous point You can delete your previous destination. 1. Push the "MENU" button. 5. Touch the switch corresponding to the desired category. Then touch the "OK" switch. 2. Touch the "Setup" switch. Then touch switch twice to display page 3 of - 2007 Toyota Highlander | Navigation Manual - Page 96
ADVANCED FUNCTIONS Map color 1. Push the "MENU" button. 4. Touch the switch you want to delete. For efficient previous point search, previous points can be sorted by the "Date" or "Name" switch. 5. To delete - 2007 Toyota Highlander | Navigation Manual - Page 97
When the "Screen Animation" feature is turned on, some switches and screens become animated. (e.g.: change map guidance on the map screen) To turn the "Screen Animation" mode on: 1. Push the "MENU" button. 3. Touch the desired color for day and/or night map and then touch the "OK" switch to return - 2007 Toyota Highlander | Navigation Manual - Page 98
ADVANCED FUNCTIONS 98 - 2007 Toyota Highlander | Navigation Manual - Page 99
OTHER FUNCTIONS SECTION OTHER FUNCTIONS Other functions IV 100 105 112 112 113 115 Maintenance information ...Calendar with memo ...Trip information ...Screen setting ...Screen adjustment ...Clock adjustment ... 99 - 2007 Toyota Highlander | Navigation Manual - Page 100
information This system informs you when to replace certain parts or components and shows dealer information (if registered) on the screen. (See "Information items" on page 101.) When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the - 2007 Toyota Highlander | Navigation Manual - Page 101
": You can input the driving distance until the next maintenance check. After you input the date and/or distance, touch the "OK" switch. The screen then returns to the "Maintenance" screen. Replace tires. Scheduled maintenance. Replace 12 volt battery. Replace air filter. Replace brake linings - 2007 Toyota Highlander | Navigation Manual - Page 102
, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions, the actual date and distance may differ from the stored date and distance in the system. (a) Register dealer You can register the dealer name, staff, location and phone - 2007 Toyota Highlander | Navigation Manual - Page 103
, location and phone number. After you input the dealer, the screen changes and displays the map location of the dealer. If it is OK, touch the "Enter" switch. The screen changes to "Edit Dealer" screen. (See "(b) Edit dealer".) 1. Touch the "Set Dealer" switch on the "Maintenance" screen. 2. To - 2007 Toyota Highlander | Navigation Manual - Page 104
OTHER FUNCTIONS D To edit "Dealer" or "Contact" D To edit "Location" D To edit "Phone #" (telephone number) To input the name, touch the alphabet, numeral and/or umlaut keys. You can input up to 24 letters. After inputting, touch the "OK" switch at the bottom right of the screen. The previous - 2007 Toyota Highlander | Navigation Manual - Page 105
"No" or "Back" switch. Touch the "Enter " switch on the "Set Dealer" screen. The screen changes and displays the map location of the registered dealer and the "Route Preference". (See " - Entering destination" on page 42.) This system informs you of a memo entry. At the specified date, the memo - 2007 Toyota Highlander | Navigation Manual - Page 106
OTHER FUNCTIONS (a) Inputting a memo To display the "Information Menu" screen, push the "INFO" button. Then touch the "Calendar" switch. To display the current month calendar, touch the "Today" switch. The current date is indicated by a yellow mark. 1. Touch the - 2007 Toyota Highlander | Navigation Manual - Page 107
the text, touch the "OK" switch at the bottom right of the screen. Touch the "Location" switch to set location. A screen similar to the destination input screen appears. Input the same way as inputting a destination. (See page 24.) You can add the memos up to 100 until December 31, 2022. 107 - 2007 Toyota Highlander | Navigation Manual - Page 108
OTHER FUNCTIONS D Mark color D Date color The date inputted is marked as shown above. You can choose the desired mark and/or date color. Touch the "Mark" switch. Touch the "Date" switch. Touch your desired color for the mark. 108 - 2007 Toyota Highlander | Navigation Manual - Page 109
screen. After you choose the date and/or mark color, touch the "OK" switch to display the previous screen. To add a memo, touch the corresponding date. The "Memo" screen appears on the display. Touch the "Add Memo" switch. (See page 106 for inputting a memo.) You can add up to 100 memos. Touch - 2007 Toyota Highlander | Navigation Manual - Page 110
OTHER FUNCTIONS (d) Editing a memo (e) Memo list To edit a memo, touch the corresponding date, and then touch the memo you wish to edit. Touch the switch. "Memo" or "Location" 1. To list the memos you added, touch the "List" switch. 110 - 2007 Toyota Highlander | Navigation Manual - Page 111
OTHER FUNCTIONS 2. Touch the desired search condition to list the memos. The "Memo List" is displayed on the screen. To display the memos listed in a desired period, touch the "Period" switch. Touch the number keys. After setting the period, touch the "OK" switch. The "Memo List" screen will be - 2007 Toyota Highlander | Navigation Manual - Page 112
displayed on the screen. For details see Section 1−10 the vehicle owner's manual. D Energy monitor D Regenerated energy D Fuel consumption D Outside temperature D Trip distance Screen setting 1. Push the "INFO" button to display the "Information Menu" screen. To edit: Touch the corresponding "Memo - 2007 Toyota Highlander | Navigation Manual - Page 113
from the audio or air conditioner screen. (b) Background color You can select a background color. Screen adjustment The brightness "DISPLAY" button. Select "ON" or "OFF" and then touch the "OK" switch. "ON": The navigation screen automatically returns from the audio or air conditioner screen - 2007 Toyota Highlander | Navigation Manual - Page 114
. The selected screen appears. INFORMATION When you do not touch any button on the "Display" screen for 20 seconds, the previous screen will be displayed. Color and tone adjustment (with rear seat entertainment system) You can adjust the color and the tone while the DVD video, DVD audio and video - 2007 Toyota Highlander | Navigation Manual - Page 115
switch, the screen changes to either day mode or night mode. To display the screen in the day mode even with the headlight switch on, touch the "DAY MODE" switch on the adjustment screen for brightness and contrast control. However, if the instrument panel light control switch is turned fully - 2007 Toyota Highlander | Navigation Manual - Page 116
manually Before you use the auto adjust function, select the time zone (see "Time Zone" described below). Touch the "ON" switch of "Auto Adjust". The time is automatically adjusted by the GPS clock. "Time Zone": You can select the time zone. When you touch this switch, the display will be change - 2007 Toyota Highlander | Navigation Manual - Page 117
OTHER FUNCTIONS D To set daylight saving time "Daylight Saving Time": You can set or cancel the daylight saving time. To set the daylight saving time touch the "ON" switch, to cancel it touch the "OFF" switch. 117 - 2007 Toyota Highlander | Navigation Manual - Page 118
OTHER FUNCTIONS 118 - 2007 Toyota Highlander | Navigation Manual - Page 119
AUDIO SYSTEM SECTION AUDIO SYSTEM Audio system V Quick reference ...120 Using your audio system ...121 Audio system operating hints ...151 V 119 - 2007 Toyota Highlander | Navigation Manual - Page 120
AUDIO SYSTEM Quick reference 1 2 3 4 5 6 Function switch display screen Touch the switches displayed on the screen to control the radio, cassette tape player and disc players. For details, see page 122. "AUDIO" button Push this button to display the audio control screen. For details, see page - 2007 Toyota Highlander | Navigation Manual - Page 121
the cassette tape. For details, see page 128. "PWR·VOL" knob Push this knob to turn the audio system on and off, and turn it to adjust the volume. For details, see page 122. "AM" button Push this button to choose an AM station. For details, see pages 122 and 125. 14 15 - 2007 Toyota Highlander | Navigation Manual - Page 122
and off "PWR·VOL": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume. The system turns on in the last mode used. "AUDIO": Push this button to display switches for audio system (audio control mode). You can select the function that enables automatic return to the - 2007 Toyota Highlander | Navigation Manual - Page 123
on the function switch display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected switch is highlighted in green or yellow. V INFORMATION FM (See page 125) CD (See page 130) D If the system does not respond to a touch of a switch, move your - 2007 Toyota Highlander | Navigation Manual - Page 124
SYSTEM are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of displayed on the screen at the audio control mode will display the sound control mode. Adjust the tone and balance as part of the cassette player. Do not insert anything other than - 2007 Toyota Highlander | Navigation Manual - Page 125
into slot at a time. D Never try to disassemble or oil any part of the compact disc player. Do not insert anything other than a enjoy the sound of the rear seat entertainment system by pushing the "DISC" button. (a) Listening to the radio Push these buttons to choose either an AM or FM station. - 2007 Toyota Highlander | Navigation Manual - Page 126
changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to prevent the weak signal from creating noise by battery disconnection or push the "SCAN" button briefly. "SCAN" appears on - 2007 Toyota Highlander | Navigation Manual - Page 127
and Blues) D Religion D Alert (Emergency message) "TYPE SEEK" switch: When a program is set, "TYPE SEEK" switch appears. Touch the switch and the system starts system can show the station name, "RDS" appears on the display. Each time you touch the "MSG" switch, indication on the display changes - 2007 Toyota Highlander | Navigation Manual - Page 128
AUDIO SYSTEM - Cassette tape player exposed tape side to the right and lightly push it in. To stop and eject the cassette tape, push the " " button. The player will automatically start when highlighted in yellow. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduction, - 2007 Toyota Highlander | Navigation Manual - Page 129
SYSTEM Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double D symare trademarks of Dolby Laboratories bol Licensing Corporation. ∗ (c) Manual switch or push the "TAPE" button. Rewind switch: Touch the of blank space between programs - 2007 Toyota Highlander | Navigation Manual - Page 130
AUDIO SYSTEM D If program that is two before the program you are listening to, push this button until "REW 3" appears on the screen. When the beginning of the tape resumes normal play. There must be at least 5 seconds of blank space between programs for this feature to work correctly. "RPT", "SKIP" - 2007 Toyota Highlander | Navigation Manual - Page 131
AUDIO SYSTEM 2. The red indicators of the slot start blinking. After the red indicators change to green, insert CHECK" appears on the display. D Setting all the discs: 1. Push the "LOAD" button until you hear a beep. 2. The red indicators of the slot start blinking. After the red indicators change - 2007 Toyota Highlander | Navigation Manual - Page 132
AUDIO SYSTEM The numbers of the trays where the compact disc is not set are dimmed. (c) Playing a compact disc Push the "DISC" button if the discs are already loaded in the player. "CD CHANGER" appears on the screen. The discs set in the player are played continuously, starting - 2007 Toyota Highlander | Navigation Manual - Page 133
AUDIO SYSTEM Fast forward: Touch the switch and hold it to fast forward the disc. seconds, then scan again. To select a track, touch the "SCAN" switch on the screen or push the "SCAN" button a second time. If the player reaches the end of the disc, it will continue scanning at track 1. After all the - 2007 Toyota Highlander | Navigation Manual - Page 134
, the display changes to the disc number screen trouble inside the system. Eject the disc. D The inside of the player unit may be too hot due to the very high ambient temperature. Eject the disc and allow the player to cool down. If the malfunction is not rectified: Take your vehicle to your dealer - 2007 Toyota Highlander | Navigation Manual - Page 135
a disc which is not playable is inserted, "DISC CHECK" will also appear on the screen. For appropriate discs for this player, see "Audio system operating hints" on page 151. (b) Ejecting a disc Push the " " button. V NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert - 2007 Toyota Highlander | Navigation Manual - Page 136
AUDIO SYSTEM (c) Playing a disc Push the "DISC" button if a disc is already loaded in the player. "DVD" appears on the screen. (If the CD player is turned on, push the "DISC" button again to switch to the DVD player.) (d) Operating an audio CD (audio CD, CD text, dts−CD) PLAYING AN AUDIO CD Push - 2007 Toyota Highlander | Navigation Manual - Page 137
AUDIO SYSTEM SEARCHING FOR A DESIRED TRACK Touch the "SCAN" switch on the screen or push the "SCAN" button. "SCAN" will be highlighted . So some functions may not work properly. Be sure to read the instruction manual for the DVD video disc separately provided. For the detailed information about DVD - 2007 Toyota Highlander | Navigation Manual - Page 138
or when you change to a different audio source. The louder sounds may have a significant impact on the human body or pose a driving hazard. Keep the "AUDIO" button to display DVD screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and the parking brake is applied, the - 2007 Toyota Highlander | Navigation Manual - Page 139
If you touch a part of the screen, where controls are not located while you are watching video, DVD controls will appear. "Page2": Touching this will display on the second page of DVD controls. "Page1": Touching this will display the top page of DVD controls. "Hide Buttons" switch: Touching this - 2007 Toyota Highlander | Navigation Manual - Page 140
SYSTEM DESCRIPTION OF DVD AUDIO CONTROLS D Top page controls "Top Menu": If you touch this switch, the menu screen for DVD audio appears. (For operation, refer to the DVD audio disc manual that is provided separately.) "Audio": The audio changing screen appears. (See page 143.) ": The menu control - 2007 Toyota Highlander | Navigation Manual - Page 141
AUDIO SYSTEM SEARCHING BY TITLE DVD video only - Enter the title number using "−", "+" and "+10" and touch "Enter". The player starts playing video for that title number. When you push either side of the "SEEK·TRACK ƜƝ" button, you can select a chapter. When you touch "Back", the previous screen - 2007 Toyota Highlander | Navigation Manual - Page 142
AUDIO SYSTEM CHANGING THE STILL PICTURE DVD audio only - Push the "Still Prev." or "Still Next" switch on the screen to forward or reverse the still pictures. CHANGING THE SUBTITLE LANGUAGE Each time you touch "Sub Title", the language is selected from the ones stored in the discs and changed. To - 2007 Toyota Highlander | Navigation Manual - Page 143
AUDIO SYSTEM CHANGING THE AUDIO FORMAT DVD audio only - Each time you touch "Audio", another audio format stored on the disc is selected. When you touch "Back", the previous screen returns. CHANGING THE ANGLE The angle can be selected for discs that are multi−angle compatible when the angle mark - 2007 Toyota Highlander | Navigation Manual - Page 144
SYSTEM SETUP MENU There are initial setting switches on the "Setup Menu 1" screen and "Setup Menu 2" screen. To change the screen, push the "Page1" or "Page2" switch on the screen. After you change on or off alternately. D Parental lock The level of viewer restrictions can be changed. 1. Touch " - 2007 Toyota Highlander | Navigation Manual - Page 145
AUDIO SYSTEM ENTER SUBTITLE LANGUAGE CODE 0920 0519 2608 1412 1620 1922 1821 1115 Italian Spanish Chinese Dutch Portuguese Swedish Russian Korean Greek Afar Abkhazian Afrikaans Amharic - 2007 Toyota Highlander | Navigation Manual - Page 146
AUDIO SYSTEM 0714 0721 0801 0809 0818 0821 0825 0901 0905 0911 0914 0919 0923 1009 1023 1101 1111 1112 1113 1114 1119 Guarani Gujarati Hausa Hindi - 2007 Toyota Highlander | Navigation Manual - Page 147
AUDIO SYSTEM 1918 1919 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 2014 2015 2018 2019 2020 2023 2111 Wolof Xhosa Yoruba Zulu (f) Operating a video CD PLAYING A VIDEO CD Push the "AUDIO" button to display this screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and - 2007 Toyota Highlander | Navigation Manual - Page 148
SYSTEM DISPLAYING OPERATION SWITCHES If you touch the part to display the operation switches on the top page. "Hide Buttons" switch: Use this switch to turn off the operation played. "Main/Sub" switch: A multiplex transmission changing switch. The mode changes from Main/Sub to Main, to Sub and back - 2007 Toyota Highlander | Navigation Manual - Page 149
or "Ɲ" on the "SEEK·TRACK" button. Touch "Back", and the previous screen returns. (g) If the player malfunctions If the player or another unit equipped with the player malfunction, your audio system will display one of the six following messages. If "DISC CHECK" appears on the display: It indicates - 2007 Toyota Highlander | Navigation Manual - Page 150
SYSTEM assigned to the picture is changed depending on the picture format has all, or violent scenes are skipped or replaced with other scenes. Level 1: DVD video discs stored in DVD video disc are divided in parts by title and chapter. Title: The engineering or disassembly is prohibited. " - 2007 Toyota Highlander | Navigation Manual - Page 151
noise from the speakers of the system which you are listening to. However, this does not indicate a malfunction. RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem , causing the radio station to sound alternately strong and weak. Station interference - When - 2007 Toyota Highlander | Navigation Manual - Page 152
parts regularly. D A dirty tape head or tape path can decrease sound quality and tangle your cassette tapes. The easiest way to clean them is by using a cleaning tape. (A wet type is recommended.) Use high−quality cassettes. D Low−quality cassette tapes can cause many problems air conditioning Remove - 2007 Toyota Highlander | Navigation Manual - Page 153
AUDIO SYSTEM Audio CDs DVD video discs DVD audio discs Video CDs Special shaped discs Low quality discs DVD player D Use only discs marked as shown above. - 2007 Toyota Highlander | Navigation Manual - Page 154
AUDIO SYSTEM NOTICE Do not use special shaped, transparent/ translucent, low quality or skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away from moisture, heat - 2007 Toyota Highlander | Navigation Manual - Page 155
AIR CONDITIONING SECTION AIR CONDITIONING Air conditioning VI Automatic air conditioning controls ...156 155 - 2007 Toyota Highlander | Navigation Manual - Page 156
control switch ...158 Air intake selector button ...159 For information about the "Rear window defogger", please refer to the Owner's Manual. Windshield air flow button ...161 Air conditioning operation screen display ("CLIMATE") button ...157 "OFF" button ...158 "AUTO" button ...160 "TEMP" button - 2007 Toyota Highlander | Navigation Manual - Page 157
Push this button to display switches for automatic air conditioning controls. The ignition key must be in the "ON" position. NOTICE To prevent the 12 volt battery from being discharged, do not leave the air conditioning on longer than necessary when the hybrid system is off. Air flow selection - 2007 Toyota Highlander | Navigation Manual - Page 158
The fan speed can be set to your desired speed by touching the appropriate air flow control switch. The higher the fan speed is, the more air is delivered. Pushing the "OFF" button turns off the fan. To remove the exterior windshield frost and interior windshield fog, use the high speed setting. The - 2007 Toyota Highlander | Navigation Manual - Page 159
inside the vehicle. 2 FRESH - Draws outside air into the system. Each time you push the air intake control button. The mode changes in order from the RECIRCULATED mode to the FRESH mode, then back to the RECIRCULATED mode. Each indicator light shows which mode is now selected. If quick circulation - 2007 Toyota Highlander | Navigation Manual - Page 160
is pushed. (a) "AUTO" button Push the "AUTO" button. An indicator light will illuminate to show that the automatic operation mode has been selected. You may use manual controls if you want to select your own settings. The fan speed is stopped for a little while until warm air preparation, when - 2007 Toyota Highlander | Navigation Manual - Page 161
the RECIRCULATED mode in this position if you push the air intake control button. To remove interior fog on the windshield - Push the windshield air flow button. To remove frost or exterior fog on the windshield - 1. Push the "TEMP" button to set the maximum temperature. 2. Push the windshield - 2007 Toyota Highlander | Navigation Manual - Page 162
the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows. D When driving on dusty roads, close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake control button be set to - 2007 Toyota Highlander | Navigation Manual - Page 163
temperature Air intake - FRESH (outside air) Air flow - PANEL Air conditioning -ON Ventilation For best results, set controls to: For automatic operation - Push in the "AUTO" button. Temperature - Towards low temperature Air intake - FRESH (outside air) Air conditioning - OFF For manual operation - 2007 Toyota Highlander | Navigation Manual - Page 164
temperature from the side vents may not be warmed up enough for a while until that the engine coolant temperature becomes high enough. If air flow from the side vents is not satisfactory, air flow direction can be changed manually by adjusting the vents fin direction or the vents may be closed. 164 - 2007 Toyota Highlander | Navigation Manual - Page 165
to be replaced if the air flow of the air conditioner and heater experiences extreme reductions in operating efficiency, or if the windows become to fog up easily. If the symptoms of air conditioning efficiency problems occur, contact your nearest dealer to have the filter checked and replaced. 165 - 2007 Toyota Highlander | Navigation Manual - Page 166
AIR CONDITIONING 1. Remove the clip with a Phillips−head screwdriver. 2. Open the glove box and push each side of the glove box to disconnect the claws. 3. Pull the filter cover toward you and remove it. 4. Remove the filter case toward you. 166 - 2007 Toyota Highlander | Navigation Manual - Page 167
AIR CONDITIONING 5. Remove the filter from the filter case. 6. Inspect the filter on the surface. If it is dirty, it should be replaced. INFORMATION The air filter should be installed properly in position. The use of air conditioning with the air filter removed may cause deteriorated dustproof - 2007 Toyota Highlander | Navigation Manual - Page 168
, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching a fork or intersection - 2007 Toyota Highlander | Navigation Manual - Page 169
information about this manual For safety reasons, this manual indicates items requiring system operating, always apply the parking brake for safety. After a few seconds, the "CAUTION" screen appears. either "English" or "Français" to select a language. Read Touch and follow the instructions - 2007 Toyota Highlander | Navigation Manual - Page 170
. Do not allow others to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when you start driving. Unavailable switches are dimmed. You can input your destination and select your route only when the vehicle - 2007 Toyota Highlander | Navigation Manual - Page 171
, late or non−voice guidance. The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before you follow any instruction from the system, look to see whether you can comply with the - 2007 Toyota Highlander | Navigation Manual - Page 172
v - 2007 Toyota Highlander | Navigation Manual - Page 173
2 "INFO" button Push this button to display the "Information Menu" screen...ii, 100, 105, 112 3 Zoom out switch Touch this switch to reduce the map scale...8 4 "Mark" switch Touch this switch to register the cursor position as a memory point...6 5 "Route" switch Touch this switch to change the route - 2007 Toyota Highlander | Navigation Manual - Page 174
configuration switch Touch this switch to change the screen mode...57 12 "DEST" button Push this button to display the "Destination" screen button to repeat a voice guidance, cancel one touch scroll, start guidance and display the current position...4, 5, 46 8 "GPS" mark (Global Positioning System - 2007 Toyota Highlander | Navigation Manual - Page 175
address by using the input keys...26 2 "POI Name" switch You can select one of the many POIs (Points of Interest) that have already been stored in the system's database...30 3 one of the three categories of emergency service points that have been already stored in the system's database...36 viii - 2007 Toyota Highlander | Navigation Manual - Page 176
each time. To use this function, it is necessary to set the "Attribute" for the memory point. (To register "Home", see page 74.) ...26 14 "Change" switch To change the search area, touch this switch...24 13 ix - 2007 Toyota Highlander | Navigation Manual - Page 177
information regarding the disc version or covered area...12 2 "Select User" switch Enables recall of up to three memorized user setting patterns...67 3 "Setup" switch Enables various settings for the navigation system...80 4 "My Places" switch Enables changes to "Memory points" and "Areas to