2007 Toyota Sequoia Owners Manual - Page 718

07 05.22 Compact disc player " (preset button 6) or Push and hold " " " (preset button 5) to fast forward or reverse within a compact disc. When you release the button, the compact disc player will resume playing. AM Push the "AM" button to turn on the radio and select the AM band. "AM" will appear on the display. AUDIO CONTROL (Tone and sound balance adjustment function) Each time you push the "AUDIO CONTROL" knob, the mode changes. To adjust the tone and balance, turn the knob. BAS: Adjusts low−pitched tones. The display ranges from −5 to 5. MID: Adjusts mid−pitched tones. The display ranges from −5 to 5. TRE: Adjusts high−pitched tones. The display ranges from −5 to 5. FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7. DISC (Compact disc) Push the "DISC" button to play a compact disc. When the audio system is set into compact disc operation, the display shows the track, or track and disc number currently being played. Vehicles with rear seat entertainment system- The "DISC" button may also be used to operate a DVD player when a disc is loaded in the DVD player. Pressing the "DISC" button changes between the CD player and DVD player. When the DVD player is in operation, "AUX" appears on the display. Error messages If the player malfunctions, your audio system will display following error messages. "WAIT": The compact disc player unit may be too hot. Allow the player to cool down. "ERROR 1": The disc may be dirty, damaged or inserted incorrectly (up−side down). Clean the disc and re−insert it. "ERROR 3": There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. "ERROR 4": Over −current. Toyota dealer to inspect. Ask your If the malfunction still exists, take your vehicle to your Toyota dealer. Ɲ DISC Ɯ Use these buttons to select a disc you want to listen to. Push "Ɲ" (preset button 3) or "Ɯ" (preset button 4) until the number of the disc you want to listen appears on the display. Dolbyr B NR∗ If you are listening to a tape that was recorded with Dolbyr B Noise Reduction, " will push " " (preset button 3). " appear on the display. Push the button again to turn off Dolbyr B NR. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduction, play your tapes with this button on or off according to the mode used to record the tape. : Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. ∗ 222 2007 SEQUOIA from Aug. '07 Prod. (OM34462U)