2007 Toyota Sequoia Owners Manual - Page 792

07 05.22 2. Bi −level-Air flows from both the floor vents and the instrument panel vents. When you set the temperature selector setting at about the middle in automatic operation, warm air flows out of the floor vents and relatively low−temperature air flows out of the center and side vents. 3. Floor-Air flows mainly from the floor vents. It is recommended that you close the lower vent. For details about this, see "Instrument panel vents" on page 301 in this Section. 4. Floor/Windshield-Air flows mainly from the floor vents and windshield vents and fan speed may increase in order to clean up the front view. This position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air intake selector button once again. It is recommended that you close the lower vent. For details about this, see "Instrument panel vents" on page 301 in this Section. For details about air flow selector settings, see "-Air flow selector settings" described below. u18002 "MODE" button (air flow selector) Press the button to select the vents used for air flow. In automatic operation, the air flow mode is selected automatically among Panel, Bi − level and Floor unless you desire another air flow mode. 1. Panel-Air flows mainly instrument panel vents. from the 296 2007 SEQUOIA from Aug. '07 Prod. (OM34462U)