2007 Toyota Sequoia Owners Manual - Page 793

07 05.22 Windshield air flow button When this button is pressed, air flows mainly from the windshield vents and fan speed may increase in order to clean up the front view. Pressing the button once again returns the air flow mode to the last one used. When this button is pressed, air intake selector mode changes to FRESH automatically to clean up the front view quickly. It is not possible to return to RECIRCULATE in this mode. Press the "A/C" button for dehumidified heating or cooling. This setting clears the front view more quickly. It is recommended that you close the lower vent. For details about this, see "Instrument panel vents" on page 301 in this Section. For details about air flow selector settings, see "-Air flow selector settings" described below. For further information for removing frost and fog, see "Instrument panel vents" on page 301 in this Section. Air intake selector button Press the button to select the air source. 1. RECIRCULATE-Recirculates the air inside the vehicle. 2. FRESH-Draws system. outside air into the When the ignition switch is turned to the "ON" position, the air intake mode is always set to FRESH even if the previous mode was RECIRCULATE. "A/C" button u18004 To turn on the air conditioning, press the "A/C" button. The "A/C" button indicator will come on. To turn the air conditioning off, press the button again. If the "A/C" button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your vehicle to a Toyota dealer for service. To prevent fogging up of the windshield, the air intake mode may change automatically to FRESH depending on the condition of the air conditioning system. For example, when the ambient temperature is low, the air intake mode may change automatically to FRESH. This is not a malfunction. 2007 SEQUOIA from Aug. '07 Prod. (OM34462U) 297