2008 Toyota Highlander Owners Manual - Page 452

4-3. Do-it-yourself maintenance n Engine oil consumption l The amount of engine oil consumed depends on the oil viscosity, the quality of the oil and the way the vehicle is driven. l More oil is consumed under driving conditions such as high speeds and frequent acceleration and deceleration. l A new engine consumes more oil. l When judging the amount of oil consumption, keep in mind that the oil may have become diluted, making it difficult to judge the true level accurately. l Oil consumption: Max. 1.1 qt./600 miles, 0.9 lmp.qt./600 miles (1.0 L per 1000 km) l If you consume more than 1.1 qt. (1.0 L, 0.9 lmp.qt.) every 600 miles (1000 km), contact your Toyota dealer. n Changing the engine oil (U.S.A. only) To reset the oil change system, follow the procedure below: 1. Set the "ENGINE START STOP" switch or the engine switch OFF with the trip meter A reading shown. (→P. 177) 2. While pressing the trip meter reset button, set the "ENGINE START STOP" switch or the engine switch ON. Without multi-information display 3. Continue to press and hold the button until the trip meter displays 000000. With multi-information display 3. Continue to press and hold the button until "COMPLETE" appears on the multi-information display. 424