2008 Toyota Land Cruiser Navigation Manual
2008 Toyota Land Cruiser Manual
2008 Toyota Land Cruiser manual content summary:
- 2008 Toyota Land Cruiser | Navigation Manual - Page 1
Customer Experience Center 1-800-331-4331 2008 Navigation System Quick Reference Guide MN 00505-NAV08-LCR Printed in USA 08/07 - 2008 Toyota Land Cruiser | Navigation Manual - Page 2
Cancel AUDIO MODE TEMPERATURE Automatic air conditioning Automatic air conditioning on Automatic air key features of the navigation system. The Quick Reference Guide is not intended as a substitute for the Navigation Owner's Manual. We strongly encourage you to review the Navigation Owner's Manual - 2008 Toyota Land Cruiser | Navigation Manual - Page 3
, Telephone, Calendar, Language, and Screen Settings. È AUDIO Button Set the radio station presets, adjust the balance and scale. CURRENT VEHICLE POSITION Mark Indicates the current position of the vehicle and its directional heading. NORTH UP OR COMPASS MODE Icon Touch to change the map - 2008 Toyota Land Cruiser | Navigation Manual - Page 4
and move to step3. If necessary to change and move Region, touch to step2. step 2 Select the appropriate Search Area by touching the desired number or Canada, then touch OK to confirm the selection. step 3 Input the house number using the number keys. step 4 and input the Touch street name - 2008 Toyota Land Cruiser | Navigation Manual - Page 5
the trip. When the yellow bar appears, the route has been selected. Touch to confirm your selection. step 10 If necessary, use the arrow keys to adjust the position on the map to put you closer to your destination. Touch to confirm the position. Quick Tip - Enter the street - 2008 Toyota Land Cruiser | Navigation Manual - Page 6
Numbered street names should be spoken as in these examples: 1st Street, say: "First Street" 15th Street, say: "Fifteenth Street" 190th Street, say: "One Hundred After the beep say, "Address " step 2 The system will confirm your input by repeating "Address" and displaying the command at the top of - 2008 Toyota Land Cruiser | Navigation Manual - Page 7
DESTINATION INPUT BY ADDRESS - VOICE RECOGNITION step 3 Press the voice command button on the steering wheel and wait for the beep. After the beep say, "California." For your destination, choose the appropriate state. step 4 Press the voice command button on the steering wheel and wait for the - 2008 Toyota Land Cruiser | Navigation Manual - Page 8
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY NAME step 1 ress the DEST anel tton follo ed i on to a ess oints of interest name. step 2 n t the name sin the letter e s and then to h . step 3 Use or to s roll or do n one a e if ne essar . o h the desired sele tion. step - 2008 Toyota Land Cruiser | Navigation Manual - Page 9
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY CATEGORY step 1 Press the DEST panel button followed by the icon to access the points of interest by category. step 2 icon to search for Touch the points of interest in the vicinity. step 3 Touch the icon. step 4 Touch - 2008 Toyota Land Cruiser | Navigation Manual - Page 10
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY CATEGORY - VOICE RECOGNITION step 1 Press the voice command button on the steering wheel and wait for the beep. After the beep say, "Nearest hotel." Most POI categories can be found by saying, "Nearest " step 2 - 2008 Toyota Land Cruiser | Navigation Manual - Page 11
button followed by the icon. step 2 Touch the icon to input telephone number. step 3 Input the area code and telephone number using the number keys followed by the icon. It is not necessary to dial "1." step 4 Select the business or assigned memory point from the screen. step 5 Select - 2008 Toyota Land Cruiser | Navigation Manual - Page 12
desired Search Area. Touch the icon to begin address input. step 3 Input the house number using the number keys. step 4 and input the street Touch name using the letter keys. Touch to see all of the available options. step 5 Touch or select from a previously registered city. step 6 Touch - 2008 Toyota Land Cruiser | Navigation Manual - Page 13
REGISTER HOME step 7 f ne essar se the arro e s to adj st the osition on the ma . o h to onfirm the osition. step 8 at the to left of the o h s reen to han e the home i on. step 9 o h the desired i on for o r home. step 10 o h at the ottom of MAP the s reen. ress the VOICE anel tton to om - 2008 Toyota Land Cruiser | Navigation Manual - Page 14
on the screen. Please refer to the cell phone manufacturer's owner's manual for pairing procedures. step 6 Upon connection, the system will indicate that the pairing process was successful. 13 Quick Tip - Verify the Bluetooth cell phone capabilities by visiting www.Toyota.Letstalk.com. Quick - 2008 Toyota Land Cruiser | Navigation Manual - Page 15
to . complete the call, touch step 4 The call is active after changes to . Some Bluetooth equipped cell phones may or may not show battery or signal strength on Tip - A noisy environment may prevent the voice recognition system from understanding your commands. It is recommended that you reduce - 2008 Toyota Land Cruiser | Navigation Manual - Page 16
PREFERENCES Select the appropriate Search Area by touching the desired number or Canada, then touch OK to confirm the selection. 3 ROUTES Once is the second fastest route. Short is the most direct route based upon driven mileage. * The system does not account for traffic signals or traffic flow. - 2008 Toyota Land Cruiser | Navigation Manual - Page 17
Connect feature will automatically link to a previously paired Bluetooth cell phone that is switched on and visible to other Bluetooth equipped devices. FREEWAY EXIT INFO MODE During Route Guidance on a Freeway or Toll Road, a variety of points of interest such as Gas - 2008 Toyota Land Cruiser | Navigation Manual - Page 18
miles ntil o arri e at the destination. Based on the distan e tra eled, the s stem ill also ro ide an estimated time ntil arri in at o r destination. he s stem an e stomized to mat h o r dri in ha its. o adj st the s eed for residential, main streets or free a s lease refer to the a i ation ner's an - 2008 Toyota Land Cruiser | Navigation Manual - Page 19
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation 1 D Initial screen ...22 D Touch screen operation ...23 D Inputting letters and numbers/List screen operation ...24 D Function help ...27 D Map screen operation ...Current position display ...Screen scroll operation ... - 2008 Toyota Land Cruiser | Navigation Manual - Page 20
vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen will be displayed when the navigation system is in operation. When the "ENGINE START STOP" switch is in ACCESSORY the "CAUTION" screen automatically switches to the map - 2008 Toyota Land Cruiser | Navigation Manual - Page 21
not use objects other than the finger to touch the screen. INFORMATION D If the system does not respond to a touch on a touch−screen button, move the finger away to clean the touch screen. D The displayed image may become darker and moving images may be slightly distorted when the display is cold - 2008 Toyota Land Cruiser | Navigation Manual - Page 22
can be input via the touch screen. D To input letters To display the alphabet keys, touch "A−Z" or " ". INFORMATION Keyboard layout can be changed. (See page 104.) Enter letters by touching the alphabet keys directly. Touching this button erases one letter. By holding this button, letters will - 2008 Toyota Land Cruiser | Navigation Manual - Page 23
and symbols To display the number keys and symbol keys, touch "0−9". D To display the list Enter numbers and symbols by touching the number keys and symbol keys directly. : Touching this button erases number of matching items is more than 9,999, the system displays "**** " on the screen. 25 - 2008 Toyota Land Cruiser | Navigation Manual - Page 24
BASIC FUNCTIONS D List screen operation When a list is displayed, use the appropriate button to scroll through the list. D Sorting The order of a list displayed on the screen can be rearranged. TYPE A To shift to the next or previous page. To scroll up or down one item at a time. This expresses a - 2008 Toyota Land Cruiser | Navigation Manual - Page 25
the "Destination", "Setup" and "Menu" screens can be viewed. "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle position up to the destination is displayed to the right of the name. "Name Sort": To sort in alphabetical order by name - 2008 Toyota Land Cruiser | Navigation Manual - Page 26
system, the current position is displayed first. This screen displays the current vehicle position driving, the current vehicle position mark is fixed on the screen and the map moves. The current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System - 2008 Toyota Land Cruiser | Navigation Manual - Page 27
. D To register the cursor position as a memory point Memory point registration enables easy access to a specific point. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 57.) Touch "Mark - 2008 Toyota Land Cruiser | Navigation Manual - Page 28
BASIC FUNCTIONS Up to 106 memory points can be registered. If there is an attempt to register more than 106, a message appears for confirmation. POI INFORMATION When the cursor is set on a POI icon, the name and "Info." are displayed on the top of the screen. D To see information about the icon - 2008 Toyota Land Cruiser | Navigation Manual - Page 29
BASIC FUNCTIONS MEMORY POINT INFORMATION When the cursor is set on a memory point icon, the name and "Info." are displayed on the top of the screen. DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. Touch "Info.". - 2008 Toyota Land Cruiser | Navigation Manual - Page 30
BASIC FUNCTIONS - Switching the screens Any one of the screen configurations can be selected . Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 33.) : To display the dual map screen. (See page 33.) : To display the - 2008 Toyota Land Cruiser | Navigation Manual - Page 31
map can be edited. Touch the right side map to display the edit screen. This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Changing the orientation of the map Touch "OK" when you complete editing. The screen returns to the dual map screen. 33 - 2008 Toyota Land Cruiser | Navigation Manual - Page 32
mark is displayed in the direction of the destination. When driving refer to the longitude and latitude coordinates, and the compass, to make sure that your vehicle is headed in the direction of the destination. or until the scale bar Touch changes. By continuing to touch the button, the scale bar - 2008 Toyota Land Cruiser | Navigation Manual - Page 33
not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one way street is displayed by . D It is not possible to perform scrolling on the foot print map (one− touch scroll) while driving - 2008 Toyota Land Cruiser | Navigation Manual - Page 34
, touch the building name. You can see details of the selected POIs. " North−up screen " Heading−up screen The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. North−up symbol Regardless of the direction - 2008 Toyota Land Cruiser | Navigation Manual - Page 35
DESTINATION SEARCH SECTION DESTINATION SEARCH Destination search 2 39 40 42 42 43 46 49 52 53 53 54 54 55 56 57 57 D Quick reference ("Destination" screen) ...38 D Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Quick access ...Destination - 2008 Toyota Land Cruiser | Navigation Manual - Page 36
by using the input keys...43 2 "POI Name" Select one of the many POIs (Points of Interest) that have already been stored in the system's database...46 3 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...52 7 "Map" A - 2008 Toyota Land Cruiser | Navigation Manual - Page 37
(interstate) entrance or exit can be entered...55 10 "?" Function help for the "Destination" screen can be viewed on this screen...27 11 "Change" To change the search area, touch this button...40 12 Quick access touch−screen buttons One of 5 preset destinations can be selected by touching the screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 38
from a different area by using "Address", "POI Name", "Freeway Ent./ Exit" or "Intersection". 2. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 11 areas. (For map database information and updates, see "Map database information and updates - 2008 Toyota Land Cruiser | Navigation Manual - Page 39
New Jersey New York Rhode Island Vermont "US10" "US9" Washington, DC Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Florida Georgia North Carolina South Carolina Canada "US3" Button "CAN" Provinces and regions included in the search area All provinces and regions in - 2008 Toyota Land Cruiser | Navigation Manual - Page 40
the quick access touch−screen buttons on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route vehicle position to your home if "Enter" is touched even while driving. INFORMATION Guidance starts from the current vehicle position - 2008 Toyota Land Cruiser | Navigation Manual - Page 41
to input a house number. After inputting a house number, touch "OK" to display the screen for inputting a street name. It is possible to input a street name first. Touch "Street" to display the screen for inputting a street name. 2. Input the street name and touch "List". 43 - 2008 Toyota Land Cruiser | Navigation Manual - Page 42
"Starting route guidance" on page 57.) If the same address exists in more than one city, the current screen changes to the city list screen. If inputting a street name first, the screen changes. The house number can then be input. If the above screen appears, an address range on the screen can be - 2008 Toyota Land Cruiser | Navigation Manual - Page 43
the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 3. Touch the button of the desired city name from the - 2008 Toyota Land Cruiser | Navigation Manual - Page 44
the button of the desired city name. If the navigation has not be used, no cities will be displayed on the screen. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 43.) 4. Touch the button of the - 2008 Toyota Land Cruiser | Navigation Manual - Page 45
search by city, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 47 - 2008 Toyota Land Cruiser | Navigation Manual - Page 46
DESTINATION SEARCH INPUTTING THE CITY NAME 1. Touch "Input City Name". SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". 2. Input the city name. 2. Touch the button of the desired city name. SELECTING FROM THE LAST 5 CITIES 3. Touch the button of the desired city name from the - 2008 Toyota Land Cruiser | Navigation Manual - Page 47
DESTINATION SEARCH - Destination search by "POI Category" (b) Selecting from the categories The destination can be set by selecting the search point and the POI category. 1. Push the "DEST" button. 2. Touch "POI Category" on the "Destination" screen. Touch "Category". If the desired POI category - 2008 Toyota Land Cruiser | Navigation Manual - Page 48
DESTINATION SEARCH INPUTTING THE CITY CENTER 1. Touch "Input City Center". SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. - 2008 Toyota Land Cruiser | Navigation Manual - Page 49
DESTINATION SEARCH SETTING THE SEARCH POINT FROM DESTINATIONS 1. Touch the destination buttons at the bottom of the screen. D To search POIs near the search point When the search point is set, the "POI Category" screen will be displayed. When an arrow facing the desired point is touched, the map - 2008 Toyota Land Cruiser | Navigation Manual - Page 50
The display changes to a screen to select police stations, dealers, hospitals or fire stations. While driving, only changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 57.) INFORMATION The navigation system does not guide - 2008 Toyota Land Cruiser | Navigation Manual - Page 51
" screen. 3. Touch the button of your desired memory point. The screen changes and displays the map location of the selected destination and the route preference. . 3. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the - 2008 Toyota Land Cruiser | Navigation Manual - Page 52
" on the second page of the "Destination" screen. The screen changes and displays the map location that was previously displayed just before the to be set. INFORMATION Guidance starts if "Enter" is touched even while driving. However, the cursor cannot be moved. 4. Touch the button of the - 2008 Toyota Land Cruiser | Navigation Manual - Page 53
Touch "Freeway Ent./Exit" on the second page of the "Destination" screen. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination and - 2008 Toyota Land Cruiser | Navigation Manual - Page 54
. 3. Input the latitude and the longitude. 4. When the input is finished, touch "OK". By touching the button of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 57.) 5. Touch the button of - 2008 Toyota Land Cruiser | Navigation Manual - Page 55
the arrow will stop the scrolling. 2. Touch "Enter". The system starts route search and displays recommended routes. If there is already To delete the existing destinations and set a new one. "Route Preference": To change the route preference. (See page 59.) "Info.": If this button is displayed - 2008 Toyota Land Cruiser | Navigation Manual - Page 56
(800 m) automatically. Set the destination again. D If a destination is entered, the road nearest to the point you selected is set as the destination. CAUTION Be sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the - 2008 Toyota Land Cruiser | Navigation Manual - Page 57
change route preference by touching "Route Preference". 2. Select the desired route preference by touching the button. When searching for a route, the system by ferry, the current vehicle position may be incorrect. Upon reception of GPS signals, it is automatically corrected. 2. Touch "Quick1 - 2008 Toyota Land Cruiser | Navigation Manual - Page 58
DESTINATION SEARCH 1 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 60 - 2008 Toyota Land Cruiser | Navigation Manual - Page 59
ROUTE GUIDANCE SECTION ROUTE GUIDANCE Route guidance 3 D Route guidance screen ...62 D Typical voice guidance prompts ...65 D Distance and time to destination ...67 D Setting and deleting destination ...Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route ... - 2008 Toyota Land Cruiser | Navigation Manual - Page 60
displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway exit information screen will be displayed. This Current position Guidance route 1 2 3 4 5 INFORMATION D If the vehicle goes off the guidance route, the route is searched again. D For - 2008 Toyota Land Cruiser | Navigation Manual - Page 61
approaches an exit or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. Road/area name 2 Distance from the current position to the exit or junction - 2008 Toyota Land Cruiser | Navigation Manual - Page 62
ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching the turn list. during guidance displays ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. during guidance displays Touching - 2008 Toyota Land Cruiser | Navigation Manual - Page 63
prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.25 miles 4.7 miles 0.25 miles +α 1 2 1 2 3 4 "Proceed about 4 miles to the traffic circle." In a quarter of a mile, traffic circle ahead, and - 2008 Toyota Land Cruiser | Navigation Manual - Page 64
is now finished." "In half of a mile, make a legal U−turn." "Make a legal U−turn ahead." (Beep sound only) INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made early or delayed. D If you did not - 2008 Toyota Land Cruiser | Navigation Manual - Page 65
time. Displayed while driving off the guidance route. The destination direction is indicated by an arrow. INFORMATION When the vehicle is on the time and arrival time is calculated based on the set vehicle speed information. (See page 103.) However, when the vehicle is not on the guidance route, - 2008 Toyota Land Cruiser | Navigation Manual - Page 66
Adding destinations and searching again for the routes can be done. - Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 1. Touch "Route". 1. Touch "Route". 2. Touch "Add". 3. Input an additional destination in the same way as the - 2008 Toyota Land Cruiser | Navigation Manual - Page 67
previously input number. 4. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. Even if "OK" is not touched, the entire route is displayed automatically within a few seconds when the order is fixed. 1. Touch "Route". - 2008 Toyota Land Cruiser | Navigation Manual - Page 68
is touched, the previous screen will return. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. 1. Touch "Route". 2. Touch "Search Condition". 3. Touch "Quick", "Quick1", "Quick2" or - 2008 Toyota Land Cruiser | Navigation Manual - Page 69
the route where a delay is caused by road repairs, or an accident, etc. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 68 and 70.) 1. Touch "Route". 2. Touch "Detour". 71 - 2008 Toyota Land Cruiser | Navigation Manual - Page 70
. This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates the detour suggested by the system. INFORMATION D When your vehicle is on - 2008 Toyota Land Cruiser | Navigation Manual - Page 71
number of choices are provided on the conditions which the system uses to determine the route to the destination. - the freeway, but the vehicle is driven parallel along the freeway.) 1. Touch "Route". 1. Touch "Route". 2. Touch "Route Preference" to change the conditions that determine the - 2008 Toyota Land Cruiser | Navigation Manual - Page 72
POI icons Points of Interest such as gas stations and restaurants can be displayed on nearest Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 20 miles (32 km). (See page 75.) Touch " (To change the displayed POI, see page 105.) 74 - 2008 Toyota Land Cruiser | Navigation Manual - Page 73
ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 20 miles (32 km) of the current position will be listed from among the selected categories. Select the desired POI categories. The selected category icon appears on the top left of the screen. By selecting the - 2008 Toyota Land Cruiser | Navigation Manual - Page 74
current vehicle position to the POI. 2. When the desired Point of Interest overlaps with the cursor, touch "Enter ". The screen changes and route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 68 and 70.) "Turn List": - 2008 Toyota Land Cruiser | Navigation Manual - Page 75
. However, not all road touching names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the - 2008 Toyota Land Cruiser | Navigation Manual - Page 76
ROUTE GUIDANCE - Route trace It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 - 2008 Toyota Land Cruiser | Navigation Manual - Page 77
ROUTE GUIDANCE Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is erased. 79 - 2008 Toyota Land Cruiser | Navigation Manual - Page 78
ROUTE GUIDANCE 80 - 2008 Toyota Land Cruiser | Navigation Manual - Page 79
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use 4 D Quick reference ("Menu" screen) ...82 D Quick reference ("Setup" screen) ...83 D Suspending and resuming guidance ...84 D Volume ...85 D User selection ...86 D My places ...89 Registering memory - 2008 Toyota Land Cruiser | Navigation Manual - Page 80
area...266 1 5 "Select User" Up to 3 different settings for different users can be memorized...86 6 "Setup" Enables various settings for the navigation system...83, 102 7 "My Places" Enables changes to "Memory points", "Home" and "Areas to avoid". Enables deletion of the previous point...89 82 - 2008 Toyota Land Cruiser | Navigation Manual - Page 81
"miles" can be selected...102 2 "Estimated Travel Time" The system to display the travel time and the arrival time to the destination on the route guidance screen can be set. . 103 3 "Keyboard Layout" Key layout can be changed...104 4 " Function" The choice whether to display each touch− screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 82
guidance can be set in all modes...107 10 "Auto Voice Guidance" Automatic voice guidance can be set...108 11 "Pop−up Message" Selection of possible...108 12 "Calibration" Adjustment of the current vehicle position mark can be done manually...109 13 "Default" This touch−screen button initializes all - 2008 Toyota Land Cruiser | Navigation Manual - Page 83
. The voice guidance volume can be adjusted or switched off. 4U5551T 2. Touch "Resume Guidance". 1. Push the "MENU" button. 4U5552T The screen will change to the current position map with route guidance. 2. Touch "Volume". To adjust the volume, select the desired level by touching the appropriate - 2008 Toyota Land Cruiser | Navigation Manual - Page 84
even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km/h). To turn the "Adaptive Volume Control" system on, touch the button. The indicator - 2008 Toyota Land Cruiser | Navigation Manual - Page 85
ADVANCED FUNCTIONS D To register 1. Push the "MENU" button. 1. Touch "Memorize". The confirmation screen will be displayed. 4U5553T 2. Touch "Select User". 2. To register, touch "Yes". To return to the previous screen, touch "No" or . When a button that is already registered is touched, the - 2008 Toyota Land Cruiser | Navigation Manual - Page 86
ADVANCED FUNCTIONS D To change user D To delete user Touch "User number". 1. Touch "Delete". The confirmation screen will be displayed. The above message appears, then the map screen will be displayed. 2. To delete, touch "Yes". To return to the previous screen, touch "No" or . 88 - 2008 Toyota Land Cruiser | Navigation Manual - Page 87
ADVANCED FUNCTIONS My places - Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 42, " - Destination search by Quick access" on page 42 and " - Destination search by Memory" on page 53.) - 2008 Toyota Land Cruiser | Navigation Manual - Page 88
ADVANCED FUNCTIONS - Registering memory points 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 5. Touch "OK". To edit registered information, see " - Editing memory Points" on page 91. 3. Touch "Register". INFORMATION Up to 106 memory points can be registered. 4. Enter the - 2008 Toyota Land Cruiser | Navigation Manual - Page 89
ADVANCED FUNCTIONS - Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 3. Touch "Edit". 5. Touch the button to be edited. "Icon": To select icons to be - 2008 Toyota Land Cruiser | Navigation Manual - Page 90
"Icon" 1. Touch "Icon" on the "Memory Point" screen. SOUND ICONS When the vehicle approaches the memory point, the selected sound will be heard. 1. Touch "with Sound" on the "Change Icon" screen. 2. Touch the desired icon. Turn the page by touching "Page 1", "Page 2" or "with Sound". 2. Touch - 2008 Toyota Land Cruiser | Navigation Manual - Page 91
"Quick Access" It is possible to change attributes of the quick access points. Memory points with a set attribute can be used as a "Quick Access" or "Home" touch−screen button. (See " - Destination search - 2008 Toyota Land Cruiser | Navigation Manual - Page 92
"Name" 1. Touch "Name" on the "Memory Point" screen. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. DISPLAYING MEMORY POINT NAMES The - 2008 Toyota Land Cruiser | Navigation Manual - Page 93
" on the "Menu" screen. 3. Touch "Delete". 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 4. Touch the button to be deleted. "Delete All": To delete all memory points in the system. 5. To delete the memory point, touch "Yes". To cancel the deletion - 2008 Toyota Land Cruiser | Navigation Manual - Page 94
ADVANCED FUNCTIONS - Registering home If home has been registered, that information can be recalled by using the "Home" touch−screen button on the "Destination" screen. (See " - Destination search by Home" on page 42.) 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 5. Touch " - 2008 Toyota Land Cruiser | Navigation Manual - Page 95
ADVANCED FUNCTIONS - Deleting home 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. - Registering area to avoid Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 1. Push the "MENU" button. 2. Touch "My - 2008 Toyota Land Cruiser | Navigation Manual - Page 96
eight directional touch− to screen button to move the cursor the desired point on the map. 6. Touch "Enter". 3. Touch "Edit". 7. Touch either or to change the size of the area to be avoided. 8. Touch "OK". 4. Touch the desired area button. INFORMATION D If a destination is input in the area to - 2008 Toyota Land Cruiser | Navigation Manual - Page 97
ADVANCED FUNCTIONS D To change "Name" 1. Touch "Name" on the "Edit Area to Avoid" screen touch "OFF" on the "Edit Area to Avoid" screen. 6. Touch "OK". 2. Enter the name using alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. DISPLAYING NAMES - 2008 Toyota Land Cruiser | Navigation Manual - Page 98
" 1. Touch "Location" on the "Edit Area to Avoid" screen. D To change "Area Size" 1. Touch "Area Size" on the "Edit Area to Avoid" ". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 100 - 2008 Toyota Land Cruiser | Navigation Manual - Page 99
. 3. Touch "Delete". 3. Touch "Delete Previous Points". 4. Touch the button to be deleted. "Delete All": To delete all registered areas to avoid in the system. 5. To delete the area, touch "Yes". To cancel the deletion, touch "No". 4. Touch the button you want to delete. "Delete All": To delete - 2008 Toyota Land Cruiser | Navigation Manual - Page 100
ADVANCED FUNCTIONS Setup Setting the items shown on the "Setup" screen can be done. (See page 83.) D Distance unit Distance unit can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 1. Push the "MENU" button. 3. Touch "km" or "miles" of "Distance" to choose the - 2008 Toyota Land Cruiser | Navigation Manual - Page 101
D The displayed time to the destination is the approximate driving time that is calculated based on the selected speeds and the actual position along the of the "Estimated Travel Time". 4. Touch or to set the average vehicle speeds for "Residential", "Main street", and "Freeway". To set the - 2008 Toyota Land Cruiser | Navigation Manual - Page 102
the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 3. Touch "ABC" or "QWE" of "Keyboard Layout" to choose the input key layout. LAYOUT TYPE 3. Touch "Change" of " Function". " "ABC" type 4. Touch the button to be turned off. The button becomes dimmed. To set the default, touch "Default - 2008 Toyota Land Cruiser | Navigation Manual - Page 103
ADVANCED FUNCTIONS D POI category change (Display POI Icons) Select from among the 6 icons displayed on the "Display POI Icons the category button to be displayed on the "Display POI Icons" top screen. 6. Touch "OK". 3. Touch "Change" of "Display POI Icons". 4. Touch the category button to be - 2008 Toyota Land Cruiser | Navigation Manual - Page 104
touch to display page 2 of the "Setup" screen. D Notifying traffic restriction When the "Traffic Restrict. Notification" feature is turned on, the system notifies you of traffic or seasonal restrictions. To turn the "Traffic Restrict. Notification" on: 1. Push the "MENU" button. 2. Touch "Setup" on - 2008 Toyota Land Cruiser | Navigation Manual - Page 105
feature is turned on, the voice recognition guidance can be heard automatically. To turn the "Voice Recognition Guidance" on: 1. Push the in All Modes" feature is turned off, voice guidance cannot be heard when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" - 2008 Toyota Land Cruiser | Navigation Manual - Page 106
ADVANCED FUNCTIONS D Auto voice guidance When the "Auto Voice Guidance" feature is turned on, the voice guidance can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance can be heard only if the "MAP/VOICE" button is pushed. To turn - 2008 Toyota Land Cruiser | Navigation Manual - Page 107
messages will not displayed. D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement on the accuracy of a current vehicle position, see "Limitations of the navigation system" on page 264. 109 - 2008 Toyota Land Cruiser | Navigation Manual - Page 108
ADVANCED FUNCTIONS POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 4. Touch either or to adjust the direction of the - 2008 Toyota Land Cruiser | Navigation Manual - Page 109
the tires are replaced, the current vehicle position mark may be incorrectly displayed. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 110
ADVANCED FUNCTIONS 112 - 2008 Toyota Land Cruiser | Navigation Manual - Page 111
Editing a memo ...Memo list ...D Hands−free system (for cellular phone) ...Enter a Bluetooth phone ...Call on the Bluetooth phone ...Receive on the Bluetooth phone ...Talk on the Bluetooth phone ...Changing the setting of the Bluetooth phone ...D Speech command system ...120 121 121 123 127 130 137 - 2008 Toyota Land Cruiser | Navigation Manual - Page 112
the navigation System is turned on, the "Information" screen displays when it is time to replace a part or certain system is turned on. (See page 22.) If "OFF" is selected, the "Information" screen is disabled. When the vehicle needs to be serviced, the touch−screen button color will change - 2008 Toyota Land Cruiser | Navigation Manual - Page 113
engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF (Automatic Transmission Fluid) "SERVICE": Scheduled maintenance "AIR FILTER": Replace air filter information, please refer to the "Owner's Manual Supplement/Scheduled Maintenance". D Depending on driving or road conditions, the actual - 2008 Toyota Land Cruiser | Navigation Manual - Page 114
OTHER FUNCTIONS - Dealer setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "INFO" button. 2. Touch "Maintenance" on the "Information" screen. 3. Touch "Set Dealer" on - 2008 Toyota Land Cruiser | Navigation Manual - Page 115
"Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. 2. Touch the eight directional touch− to screen button - 2008 Toyota Land Cruiser | Navigation Manual - Page 116
informs you of the memo entry when the system is turned on. (See page 23.) Memos can also be used for route guidance if the memo has been registered with location information. 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 1. Push the "INFO" button - 2008 Toyota Land Cruiser | Navigation Manual - Page 117
of the mark displayed next to the date. To default the mark color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date color" screen. "Prev. Day": To go to the "Memo" screen of the previous date. "Today": To - 2008 Toyota Land Cruiser | Navigation Manual - Page 118
informs of the memo entry when the system is started on the memo date. (See page 23.) 1. Push the "INFO" button. 2. Touch "Calendar" on the "Information" screen. 3. Touch the date you want to add a memo on the "Calendar" screen. 6. Enter text using the keys. Up to 24 letters can be entered. After - 2008 Toyota Land Cruiser | Navigation Manual - Page 119
period. (See page 122.) 5. Touch the item to be edited. "Memo": To edit a memo. (See " - Adding a memo" on page 120.) "Location": To change a registered location. (See " - Adding a memo" on page 120.) "Enter ": To set the registered location as a destination. (See "Starting route guidance" on page - 2008 Toyota Land Cruiser | Navigation Manual - Page 120
the displayed memos. A message will be displayed. 6. To delete, touch "Yes". To cancel the deletion, touch "No". 2. Enter the period using the numeral keys. The period from January 1, 2005 through December 31, 2024 can be set for searching. 3. After setting the period, touch "OK". The "Memo List - 2008 Toyota Land Cruiser | Navigation Manual - Page 121
wheel by connecting your cellular phone. This system supports Bluetoothr. Bluetoothr is a wireless data system by which you can call without your CAUTION While driving, do not use a cellular phone or connect the Bluetooth phone. NOTICE Do not leave your cellular phone in the car. The temperature - 2008 Toyota Land Cruiser | Navigation Manual - Page 122
. D The sound of the air−conditioning fan is loud. " Microphone You can use the microphone above when talking on the phone. The other party's voice outputs from the driver's speaker. When the received calls or received voice outputs, the audio from the audio system or voice guidance from the - 2008 Toyota Land Cruiser | Navigation Manual - Page 123
not support HFP, you cannot enter the Bluetoothr phone, and take OPP service individually. Empty Full It is not displayed while the Bluetoothr is connecting or the phone book data is being transferred. The amount left does not always correspond with the one of your cellular phone. This system doesn - 2008 Toyota Land Cruiser | Navigation Manual - Page 124
the seat or in the glove box and console box). D Your cellular phone touches or is covered with metal materials. Leave the Bluetoothr phone on the place where "Blue" indication is displayed. FCC ID: BABBT015A MADE IN JAPAN This device complies with Part 15 of the FCC Rules. Operation is subject - 2008 Toyota Land Cruiser | Navigation Manual - Page 125
"Telephone" screen. You can also push of the steering wheel to display this screen when the vehicle is stopped. 5. Touch "Register" to connect your cellular phone to the system. *: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 3. Touch "Settings" to display "Settings" screen. 127 - 2008 Toyota Land Cruiser | Navigation Manual - Page 126
OTHER FUNCTIONS 6. When this screen is displayed, input the Passkey displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". When this screen is displayed, follow the guidance on the screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 127
AUTOMATICALLY MANUALLY When the auto connection failed or turned off, you have to connect Bluetoothr manually. automatically connected and the connection result is displayed. This screen appears when the Bluetoothr phone is first connected after the "ENGINE START STOP" switch is in the ACCESSORY - 2008 Toyota Land Cruiser | Navigation Manual - Page 128
when the "ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode, the system automatically reconnects the system. You can call using the 7 methods described below. D By dial You can call by inputting the telephone number. This cannot be operated while driving. Touch the desired key - 2008 Toyota Land Cruiser | Navigation Manual - Page 129
data which is transferred from your cellular phone. The system has one phone book. You can register up to 1000 numbers. This cannot be operated while driving. 2. Select the desired number from the list. 1. Touch "Phone Book" to display "Phone Book" screen. Touch wheel. or push of the steering - 2008 Toyota Land Cruiser | Navigation Manual - Page 130
OTHER FUNCTIONS D By dialed numbers You can call by dialed number. The system memorizes up to 5 dialed numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. D When you call by phone book, the name (if registered) is displayed. D When you call the same - 2008 Toyota Land Cruiser | Navigation Manual - Page 131
You can call by received calls. When a call is received, the system memorizes up to 5 numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. D When a telephone number registered in phone book is received, the name and the number are displayed. D Received - 2008 Toyota Land Cruiser | Navigation Manual - Page 132
which you selected from a phone book, dialed numbers and received calls. operation and command of voice recognition, see "Speech command system" on page 171 and "Help screen" on page 173 change the page by touching "Speed Dial 2" or "Speed Dial 3". When you push the telephone switch while driving, - 2008 Toyota Land Cruiser | Navigation Manual - Page 133
the beep, please say "Dial"." You: "Dial." System: "Dialing the name." Now you can call Charlize. "Next" is displayed when multiple entries are found for a searched name. Up to 6 entries can be displayed including the first searched one. Do the following to change the entry to the next one. D Touch - 2008 Toyota Land Cruiser | Navigation Manual - Page 134
can call by giving a desired number. SENDING A TONE You can send a tone by giving a desired number. You: System: Push the talk switch. "After the beep, please say the number." You: "812387." System: "When ready, please briefly push the talk switch or push the off−hook switch to dial." You: Push - 2008 Toyota Land Cruiser | Navigation Manual - Page 135
OTHER FUNCTIONS - Receive on the Bluetooth r phone D By POI call You can call by touching when it is displayed on the screen from navigation system. (See page 30 for details.) When a call is received, this screen is displayed with a sound. Touch or push of the steering wheel to talk on - 2008 Toyota Land Cruiser | Navigation Manual - Page 136
a Key: Touch "0−9". To transfer the call Touch "Transfer Call". You cannot change from Hands−free call to cellular phone call while driving. When you change from of the phone, see the manual that comes with your cellular phone. Touch the desired number to input the key. To hang up the phone: - 2008 Toyota Land Cruiser | Navigation Manual - Page 137
number. (ex. 056133p0123w#1:) You can do this operation when you want to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the code number in the phone book. 1. Touch "Speed Tone". 2. Touch the desired switch to send a tone. 139 - 2008 Toyota Land Cruiser | Navigation Manual - Page 138
number from phone book, dialed numbers and received calls. Up to 17 speed dial numbers can be registered. The 6th entry is the speed dial for redialing. Touch "Settings" to display "Settings" screen. 1. Touch "Speed Dial" to display the "Speed Dial Settings" screen. You can change the settings of - 2008 Toyota Land Cruiser | Navigation Manual - Page 139
OTHER FUNCTIONS D Deleting the speed dial individually You can delete "01" − "17" of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. 4. Touch the desired telephone number. 1. Touch "Delete" of "Speed Dial". 5. Touch the touch−screen button you want to - 2008 Toyota Land Cruiser | Navigation Manual - Page 140
OTHER FUNCTIONS D Deleting all of the speed dial (b) Registering the speed tone You can register the desired tone number. Up to 6 speed tone numbers can be registered. 1. Touch "Delete All" of "Speed Dial". 1. Touch "Register" of "Speed Tone". 2. Touch "Yes". 2. Use the software keyboard to - 2008 Toyota Land Cruiser | Navigation Manual - Page 141
OTHER FUNCTIONS D Editing the speed tone You can edit the speed tone. 3. Input the number and touch "OK". 1. Touch "Edit" of "Speed Tone". 4. Touch the desired touch−screen button you want to register in. 2. Touch the touch−screen button you want to edit. If you select a touch−screen button you - 2008 Toyota Land Cruiser | Navigation Manual - Page 142
OTHER FUNCTIONS D Deleting the speed tone individually You can delete "1" to "6" of the speed tone. If you delete them all at once, all of 6 numbers are deleted. 3. Use the software keyboard to input the name. 1. Touch "Delete" of "Speed Tone". 4. Input the number and touch "OK". 2. Touch the - 2008 Toyota Land Cruiser | Navigation Manual - Page 143
OTHER FUNCTIONS D Deleting all the speed tone (c) Setting the volume 1. Touch "Delete All" of "Speed Tone". 1. Touch "Volume" to display the "Volume Settings" screen. 2. Touch "Yes". 2. Touch "−" or "+" to adjust the "Voice Volume" or "Ring Volume". "Voice Volume" ...Adjusting the other party's - 2008 Toyota Land Cruiser | Navigation Manual - Page 144
OTHER FUNCTIONS D Automatic volume settings for high speed You can set the volume one step up when the speed is over 50 mph (80 km/h). (When it is - 2008 Toyota Land Cruiser | Navigation Manual - Page 145
OTHER FUNCTIONS (d) Setting the screen D Incoming call display You can select the method of the receiving call display. 1. Touch "Screen" to display the "Screen Settings" screen. Touch "Full" or "Icon". "Full" mode ...When a call is received, the Hands− free screen is displayed and you can - 2008 Toyota Land Cruiser | Navigation Manual - Page 146
automatically changes ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode and the Bluetoothr is automatically connected, the connection check is displayed. Touch "ON" or "OFF" of "Show Bluetooth* connection status at startup". *: Bluetooth is a registered trademark of Bluetooth - 2008 Toyota Land Cruiser | Navigation Manual - Page 147
FUNCTIONS D Initializing the settings You can initialize the settings. (e) Setting the phone book You can register phone numbers in the phone book. Touch "Default". Touch "Phone Book" to display the "Phone Book Management" screen. Touch "Yes". You can do the detail settings of phone book. 149 - 2008 Toyota Land Cruiser | Navigation Manual - Page 148
. Up to 1000 person's data (up to 2 numbers a person) can be registered in the phone book. Transfer it while the engine is running. 4. Transfer the phone book data to the system using the Bluetoothr phone. This screen appears while transferring. To cancel it, touch "Cancel". If the transferring - 2008 Toyota Land Cruiser | Navigation Manual - Page 149
data. D Editing the name When you don't input the name, the number is displayed. 1. Touch "Register" of "Phone Book". 1. Touch "Name". 2. Touch the desired touch−screen button to edit the phone book. 2. Use the software keyboard to input the name. 3. When you complete the edit, touch "OK". 151 - 2008 Toyota Land Cruiser | Navigation Manual - Page 150
OTHER FUNCTIONS D Editing the phone number You can register a phone number in "TEL1" and "TEL 2" separately. Up to 2 numbers a person can be registered. D Selecting the group You can set a group for a contact (for example: "Family", "Friends", "Office"...). It will then be easier for you to find - 2008 Toyota Land Cruiser | Navigation Manual - Page 151
can set the voice recognition. Up to 20 numbers can be registered for the voice recognition. D Adding the data to the phone book You can add data to the phone book. 1. Touch "Add to". 1. Touch "Voice Rec.". 2. Select the data you want to add log data to. 2. Select the phone number and - 2008 Toyota Land Cruiser | Navigation Manual - Page 152
OTHER FUNCTIONS D Editing the data You can edit the registered data. 1. Touch "Edit". 3. Touch the desired touch−screen button. When you edit the data, touch "OK". 2. Select the data you want to edit. When you also touch "Edit" on this screen, you can edit it. 154 - 2008 Toyota Land Cruiser | Navigation Manual - Page 153
Deleting the data You can delete the data. When you release your car, delete all your data on the system. You can also delete it in the following way. 1. Touch "Phone Book". 1. Touch "Delete" of "Phone Book". 2. Select the desired data. 2. Touch the desired touch−screen button. 3. Touch "Delete - 2008 Toyota Land Cruiser | Navigation Manual - Page 154
OTHER FUNCTIONS D Deleting all the phone data 4. Touch "Yes". 1. Touch "Delete All" of "Phone Book". 2. Select the deleting method. "Group Data" ...Deleting all the phone data in group. "All Contact Data" ...Deleting all the phone data. 156 - 2008 Toyota Land Cruiser | Navigation Manual - Page 155
OTHER FUNCTIONS 3. When you select "Group Data", the "Select Group" screen is displayed. You can also delete it in the following way. 4. Select the desired group. 1. Touch "Phone Book". 5. Touch "Yes". 2. Touch "Delete All". 3. Touch "Yes". 157 - 2008 Toyota Land Cruiser | Navigation Manual - Page 156
FUNCTIONS D Registering a group name You can register 20 groups. "No Group", "Group 01" − "Group 19" are registered by default. You can change "Group 01" − "Group 19" into desired names. D Selecting a group icon 1. Touch "Icon". 1. Touch "Register" of "Group Name". 2. Select the desired icon - 2008 Toyota Land Cruiser | Navigation Manual - Page 157
OTHER FUNCTIONS D Editing a group name D Deleting a group name You can delete the group names individually or all at once. If you delete a group name, that group will return to the default setting (excluding "No Group"). 1. Touch "Name". 1. Touch "Delete" of "Group Name". 2. Use the software - 2008 Toyota Land Cruiser | Navigation Manual - Page 158
the group name D Deleting the log data You can delete the log data individually or all at once. When you release your car, delete all the data on the system. INDIVIDUALLY 1. Touch Name". "Delete All" of "Group 1. Touch "Delete" on the "Log Data" screen. 2. Touch "Yes". 2. Touch "Yes". 160 - 2008 Toyota Land Cruiser | Navigation Manual - Page 159
the Hands−free system. It is useful when you leave your car with the hotel or you don't want others to see the data you registered. When you set or unlock the security, you have to input the security code. Be sure to change the default code when you use the security for the first - 2008 Toyota Land Cruiser | Navigation Manual - Page 160
the phone book data but also the memory points in the navigation system, etc. will be deleted. (See "D Initializing the security code" on page 164.) 3. Input the security code. Each time you touch A, an input digit is deleted. 4. Touch "Yes". 1. Touch "Phone Book Lock". 2. Touch "Change". 162 - 2008 Toyota Land Cruiser | Navigation Manual - Page 161
functions locked. D Display of the phone book screen and transferring, registering, editing, deleting the phone book data. D Display of speed dial screen, information screen. D Changing the security code. When you set this function, the speed dial screen is not displayed while driving. 1. Touch "ON - 2008 Toyota Land Cruiser | Navigation Manual - Page 162
OTHER FUNCTIONS - Set a Bluetoothr phone D Initializing the security code You can initialize the settings. D Selecting a Bluetoothr phone In case you register more than one Bluetoothr phone, you need to choose a favorite one. 1. Touch "Default". 1. Touch "Settings" to display the "Settings" - 2008 Toyota Land Cruiser | Navigation Manual - Page 163
Bluetoothr phone is trying to connect, this screen is displayed. Touch "Yes" or "No". Although you can register up to 6 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. 3. Touch "OK". When the result message is displayed, you can use the Bluetoothr phone. 165 - 2008 Toyota Land Cruiser | Navigation Manual - Page 164
on the screen. You can change it into a desired name. "Bluetooth* Device Address" ...The address peculiar to the system. You cannot change it. 2. Touch "Change". 1. Select the desired phone and touch "Information". *: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 3. When you complete - 2008 Toyota Land Cruiser | Navigation Manual - Page 165
it. "Passkey" ...The password when you register your cellular phone in the system. You can change it into the figure of 4−8 digits. "Bluetooth* Device Address" ...The address peculiar to the system. You can not change it. If you have registered two Bluetoothr phones with the same Device Name or - 2008 Toyota Land Cruiser | Navigation Manual - Page 166
3. Use the software keyboard to input the device name. You can input up to 20 characters. 2. Touch "Change" of "Device Name" or "Passkey". *: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 4. Input a Passkey with 4 − 8 digits. When you touch A, the input number is deleted. 5. When you - 2008 Toyota Land Cruiser | Navigation Manual - Page 167
. You can initialize the settings. D Deleting a Bluetoothr phone 1. Touch "Default". 1. Touch "Delete" of "Bluetooth* Telephone". 2. Touch "Yes". 2. Select the telephone you want to delete and touch "OK". 3. Touch "Yes". *: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 169 - 2008 Toyota Land Cruiser | Navigation Manual - Page 168
OTHER FUNCTIONS When you delete the telephone while another Bluetoothr phone is connecting, this message is displayed. D Displaying the information of the Bluetoothr phone you delete You can display the information of the Bluetoothr phone before you delete it and you can make sure whether the - 2008 Toyota Land Cruiser | Navigation Manual - Page 169
command system The speech command system enables you to operate the navigation system, audio system and air conditioning system by giving .) When you touch "Cancel", the previous screen returns. If the navigation system does not respond or the confirmation screen does not disappear, please push the - 2008 Toyota Land Cruiser | Navigation Manual - Page 170
you will hear "Home is not registered". " Microphone It is unnecessary to speak directly into the microphone when giving a command. 3. If the system recognized the command, the recognition result "Home" is displayed on the top of the screen with the screen message. (Displayed message and the touch - 2008 Toyota Land Cruiser | Navigation Manual - Page 171
the destination by "POI Name", this screen is displayed. This system has a function which displays the voice recognition help screen. You can see the command list and operating guide on it. (a) Command list 1. If the "Operating guide" screen is displayed, touch "Command list" on the upper side - 2008 Toyota Land Cruiser | Navigation Manual - Page 172
1. If the "Command list" screen is displayed, touch "Operating guide" on the upper side of the screen. The clock in this system can be corrected manually or by using signals from the GPS. Daylight Saving Time setting or your desired time setting is available. 5E5502T 2. Select the desired category - 2008 Toyota Land Cruiser | Navigation Manual - Page 173
or canceled. While daylight saving time is set, this switch is highlighted in green. Time Zone: You can select the time zone. Touching this switch changes to the time zone selection screen. Touch the switch of your desired area. The time zone for the area is set and the previous screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 174
OTHER FUNCTIONS Screen adjustment The brightness or contrast of the screen can be adjusted depending on the brightness of your surroundings. You can also turn the display off. 1. To display the "Display" screen, push the "DISP" button. 2. Touch the desired button to adjust contrast and brightness - 2008 Toyota Land Cruiser | Navigation Manual - Page 175
the red color of the screen. "Color" "G": Strengthens the green color of the screen. "Tone" "+": Strengthens the tone of the screen. "Tone" "−": Weakens the tone of the screen. 2. After adjusting the screen, touch "OK". If your vehicle is equipped with the rear seat entertainment system, the rear - 2008 Toyota Land Cruiser | Navigation Manual - Page 176
" screen. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen automatically returns from the audio/air conditioner screen 20 seconds after the end of audio/ air conditioner screen operation. "OFF": The audio/air conditioner screen remains on. 2. Touch "Screen Setting". 178 - 2008 Toyota Land Cruiser | Navigation Manual - Page 177
OTHER FUNCTIONS (b) Switch color You can select the color of the touch− screen buttons. (c) Rear system lock (with rear seat entertainment system) If the vehicle is equipped with the rear seat entertainment system, the rear seat entertainment system can be locked to prevent rear passengers from - 2008 Toyota Land Cruiser | Navigation Manual - Page 178
to avoid D Previous points D Route trace D User selection settings D Phone book data D Dialed numbers and received calls D Speed dial D Bluetooth phone data D Security code This function is available only when the vehicle is not moving. 1. Touch "Delete personal data". The "Delete personal data - 2008 Toyota Land Cruiser | Navigation Manual - Page 179
You can set a beep sound off. Selecting a language The language of the touch−screen buttons, pop−up messages and the voice guidance can be changed. 1. Push the "INFO" button. 1. Push the "INFO" button. 2. Touch "Beep Off". "Beep Off" is highlighted. To switch the beep sound on, touch "Beep Off - 2008 Toyota Land Cruiser | Navigation Manual - Page 180
çais" or "Español" to select a language. If a screen other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "OK". The language is changed and the screen returns to the map display. 182 - 2008 Toyota Land Cruiser | Navigation Manual - Page 181
AUDIO/VIDEO SYSTEM SECTION AUDIO/VIDEO SYSTEM Audio/video system 6 185 191 203 233 D Quick reference ...184 D Using your audio/video system ...185 Some basics ...Radio operation ...DVD changer operation ...D Audio/video remote controls ... D Audio/video system operating hints ...234 183 - 2008 Toyota Land Cruiser | Navigation Manual - Page 182
AUDIO/VIDEO SYSTEM Quick reference 1 2 3 Function button display screen Touch the button Push this button to insert the discs. For details, see page 203. "AUDIO CONTROL"/"TUNE·FILE" knob Push this knob to adjust the audio sounds. Turn this knob to move up or down the station band or file. For - 2008 Toyota Land Cruiser | Navigation Manual - Page 183
and 228. This section describes some of the basic features on Toyota audio/video systems. Some information may not pertain to your system. Your audio/video system works when the "ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode. NOTICE To prevent the battery from being discharged - 2008 Toyota Land Cruiser | Navigation Manual - Page 184
AUDIO/VIDEO SYSTEM CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user's authority to operate this device. D Laser products D Do not take this unit apart or attempt to make any changes - 2008 Toyota Land Cruiser | Navigation Manual - Page 185
set, DVD changer does not turn on. You can turn off each player by ejecting the cassette tape or disc. If the audio system was previously off, then the entire audio system will be turned off when you eject the cassette tape or disc. If another function was previously playing, it will come on - 2008 Toyota Land Cruiser | Navigation Manual - Page 186
and DVD changer operation are displayed on the function button display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected button is highlighted. D If the system does not respond to a touch of a touch−screen button, move your finger away from - 2008 Toyota Land Cruiser | Navigation Manual - Page 187
AUDIO/VIDEO SYSTEM D Tone and balance How good an audio program sounds to you is largely determined by the mix of Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of sounds while decreasing the volume of - 2008 Toyota Land Cruiser | Navigation Manual - Page 188
of "SURROUND" and touch "OK". The surround function will turn on. Automatic sound levelizer (ASL): When the audio sound becomes difficult to hear due to road noise, wind noise or other noises while driving, touch "ON". The system adjusts to the optimum volume and tone quality according to the noise - 2008 Toyota Land Cruiser | Navigation Manual - Page 189
Push these buttons to choose either an AM or FM station. "AM", "FM1" or "FM2" appears on the screen. If your vehicle is equipped with a satellite radio broadcast system, when you push the "AM·SAT" button, "AM", "SAT1", "SAT2", "SAT3" station appears on the display. For details about satellite radio - 2008 Toyota Land Cruiser | Navigation Manual - Page 190
AUDIO/VIDEO SYSTEM D Presetting a station Turn the knob clockwise to step up the station band or counterclockwise to step down. Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the - 2008 Toyota Land Cruiser | Navigation Manual - Page 191
on reception. Each time you push the button, the stations will be searched automatically one after another. To scan all the frequencies: Touch "SCAN" on "SCAN" button again. D RDS (Radio Data System) Your audio system is equipped with Radio Data Systems (RDS). RDS mode allows you to receive text - 2008 Toyota Land Cruiser | Navigation Manual - Page 192
AUDIO/VIDEO SYSTEM "TYPE A "" Each time you touch "TYPE A" or "TYPE "", the program type changes as follows: D ROCK D EASY LIS (Easy listening) D CLS/JAZZ (Classical music and Jazz) D R & B (Rhythm and Blues) D INFORM (Information) D RELIGION D MISC (Miscellaneous) D ALERT (Emergency message) " - 2008 Toyota Land Cruiser | Navigation Manual - Page 193
) If the system receives a radio text from an RDS station, "MSG" appears on the display. Touch "MSG", and a text message is displayed on the screen. This function is available only when the vehicle is not moving. When you touch "MSG OFF", the display returns. "TRAF" The tuner automatically seeks - 2008 Toyota Land Cruiser | Navigation Manual - Page 194
AUDIO/VIDEO SYSTEM - Radio operation (XMr Satellite Radio broadcast) To listen to a satellite radio broadcast in your vehicle, an additional a unique radio ID. You will need the radio ID when activating XMr service or when reporting a problem. If you select the "CH 000" using the "TUNE" knob, the - 2008 Toyota Land Cruiser | Navigation Manual - Page 195
AUDIO/VIDEO SYSTEM D Listening to satellite radio Push the "AM·SAT" button to choose either an AM station or an SAT channel. Besides "AM", "SAT1", "SAT2" or "SAT3" - 2008 Toyota Land Cruiser | Navigation Manual - Page 196
AUDIO/VIDEO SYSTEM D Channel category D Presetting a channel 1. Tune in the desired channel. Touch either appears on the touch−screen button. Each SAT mode can store up to 6 stations. To change the preset channel to a different one, follow the same procedure. The preset channel memory is cancelled - 2008 Toyota Land Cruiser | Navigation Manual - Page 197
AUDIO/VIDEO SYSTEM D Selecting a channel Tune in the desired channel using one of the following methods. Preset tuning: Touch the channel selector touch−screen button (1 - 6) for the channel - 2008 Toyota Land Cruiser | Navigation Manual - Page 198
AUDIO/VIDEO SYSTEM D Displaying the title and name When you touch "TEXT", the song/program title and the artist name/feature are displayed. Up to 10 alphanumeric . If there is no song/program title or artist name/feature associated with the channel at that time will appear on the display. 200 - 2008 Toyota Land Cruiser | Navigation Manual - Page 199
". If it does not change automatically, select another channel. If you want to listen to the premium channel, contact the XMr Satellite Radio. The XMr signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal. The unit is acquiring audio or program - 2008 Toyota Land Cruiser | Navigation Manual - Page 200
the user's right to operate the equipment. INFORMATION This XMr tuner supports "Audio Services" (Music and Talk) of only XMr Satellite Radio and "Text Information"* linked to the respective "Audio Services". *Text Information includes, Station Name, (Artist) Name, (Song) Title and Category - 2008 Toyota Land Cruiser | Navigation Manual - Page 201
/video system operating hints" on page 234. For safety reasons, you can enjoy DVD video discs, DVD audio discs and video CDs only when the vehicle is completely stopped with the "ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode and the parking brake applied. While you are driving - 2008 Toyota Land Cruiser | Navigation Manual - Page 202
AUDIO/VIDEO SYSTEM D Setting all the discs: 2. Insert only one disc while the DVD changer door is open. You can set a disc at the lowest empty disc number. After insertion, the set disc is automatically the slot start blinking. After the amber indicators change to green and stay on, the DVD changer - 2008 Toyota Land Cruiser | Navigation Manual - Page 203
AUDIO/VIDEO SYSTEM 3. Insert the next disc after the amber indicators change to green and stay on and the after pushing the "LOAD" button, the beep will sound and the operation will be canceled automatically. D Ejecting a single alone: NOTICE Do not insert one disc stacked on top of another - 2008 Toyota Land Cruiser | Navigation Manual - Page 204
be canceled automatically. When all Audio disc and MP3/WMA disc only - When play of one disc ends, the first track of the following disc starts. When play of the final disc ends, play of the first disc starts again. The changer will skip any empty disc trays. Vehicles with rear entertainment system - 2008 Toyota Land Cruiser | Navigation Manual - Page 205
the disc you want to play. The selected disc is automatically played. On the screen: Touch the desired disc number. The selected disc number is highlighted. The changer will start playing the selected disc from the first track. On the audio panel: Push the " " or " " button of "CH·DISC". When you - 2008 Toyota Land Cruiser | Navigation Manual - Page 206
AUDIO/VIDEO SYSTEM D Selecting a desired track Touch the desired track number. The you release the button, the changer will resume playing. Vehicles with rear entertainment system - While the DVD player is in operation, the chapter or track can be changed by pushing either side of the "SEEK·TRACK" - 2008 Toyota Land Cruiser | Navigation Manual - Page 207
AUDIO/VIDEO SYSTEM D Searching for a desired track or a disc Searching for a desired push the "SCAN" button once again. After all the audio discs are scanned in one pass, normal play resumes. D Other functions "RPT": Use it for automatic repeat of the track or disc you are currently listening to - 2008 Toyota Land Cruiser | Navigation Manual - Page 208
AUDIO/VIDEO SYSTEM "RAND": Use it for automatic and random selection. Playing the tracks on one disc in random order - While the disc is playing, touch "RAND" briefly. "RAND" appears on the screen. The system selects a track on the disc being listened to in random order. To cancel it, touch "RAND" - 2008 Toyota Land Cruiser | Navigation Manual - Page 209
AUDIO/VIDEO SYSTEM D Selecting a desired folder "FOLDERY": Touch "FOLDERY" to go to the next folder. "FOLDERB": Touch "FOLDERB" briefly to go to the previous folder. To jump up to the first folder, touch "FOLDERB" and hold it until the beep sounds. "FOLDER LIST": The desired folder can be selected - 2008 Toyota Land Cruiser | Navigation Manual - Page 210
AUDIO/VIDEO SYSTEM D Selecting a desired file "SEEK·TRACK" button: Use for direct access to a desired file. Push the " " or " " button of "SEEK·TRACK" and repeat it until the - 2008 Toyota Land Cruiser | Navigation Manual - Page 211
AUDIO/VIDEO SYSTEM "FILE": The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "FILE". The file list is displayed. Touch the of the file currently playing is displayed. This function is available only when the vehicle is not moving. 213 - 2008 Toyota Land Cruiser | Navigation Manual - Page 212
AUDIO/VIDEO SYSTEM D Searching for a desired file D Searching for a desired folder While the disc is playing, touch "SCAN" on the screen or push the "SCAN" button briefly. "SCAN" - 2008 Toyota Land Cruiser | Navigation Manual - Page 213
AUDIO/VIDEO SYSTEM D Other functions "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - While the file is playing, touch"RPT" briefly. "RPT" appears on the screen. When the file is finished, the changer will automatically go back to the - 2008 Toyota Land Cruiser | Navigation Manual - Page 214
screen appears when the video screen is first displayed after the "ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode. Touch "OK or when you change to a different audio source. The louder sounds may have a significant impact on the human body or pose a driving hazard. Keep this - 2008 Toyota Land Cruiser | Navigation Manual - Page 215
Push the "AUDIO" button to display this screen. You can operate the touch− screen buttons and choose the number of the disc you want to play. The selected disc is automatically played. When you touch "WIDE", the screen mode can be changed. If you touch "PICTURE" when the vehicle is completely - 2008 Toyota Land Cruiser | Navigation Manual - Page 216
AUDIO/VIDEO SYSTEM D Description of DVD controls TOP PAGE OF DVD VIDEO CONTROLS "Menu" and "Top Menu": If you touch either button, the menu screen for DVD video appears. (For the operation, see the manual that come with the DVD video disc provided separately.) : The menu control key appears on the - 2008 Toyota Land Cruiser | Navigation Manual - Page 217
AUDIO/VIDEO SYSTEM TOP PAGE OF DVD AUDIO CONTROLS "Top Menu": If you touch this button, the menu screen for DVD audio appears. (For operation, refer to the DVD audio disc manual that is provided separately.) "AUDIO": The audio changing screen appears. (See page 223.) : The menu control key appears - 2008 Toyota Land Cruiser | Navigation Manual - Page 218
AUDIO/VIDEO SYSTEM D Searching by title D Searching by track DVD video only - wrong numbers, touch "Clear" to delete the numbers. When you touch screen returns. , the previous DVD audio only - Enter the track numbers on the searching track screen and touch "Enter". The changer starts playing - 2008 Toyota Land Cruiser | Navigation Manual - Page 219
AUDIO/VIDEO SYSTEM D Searching by group D Selecting the bonus group DVD audio only - Enter the group you touch screen returns. , the previous DVD audio only - Enter the bonus group number on the searching group screen and touch "Enter". The "Enter Key Code" screen will appear. To enter the - 2008 Toyota Land Cruiser | Navigation Manual - Page 220
AUDIO/VIDEO SYSTEM D Changing the still picture D Changing the subtitle language DVD audio only - Touch "Prev. Still" or "Next Still" on the screen to forward or reverse the still pictures. Each time you touch "Subtitle", the language is selected from the ones stored in the discs and changed. To - 2008 Toyota Land Cruiser | Navigation Manual - Page 221
AUDIO/VIDEO SYSTEM D Changing the audio language D Changing the audio format DVD video only - Each time you touch "AUDIO", the language is selected from the ones stored in the discs and changed. When you touch screen returns. , the previous DVD audio only - Each time you touch "AUDIO", another - 2008 Toyota Land Cruiser | Navigation Manual - Page 222
previous The initial setting can be changed. After you change the initial setting, touch "Enter". The previous picture will be displayed. When "Default" is touched, all menus are initialized. AUDIO LANGUAGE You can change the audio language. 1. Touch "Audio Language". 2. Touch the language you want - 2008 Toyota Land Cruiser | Navigation Manual - Page 223
AUDIO/VIDEO SYSTEM SUBTITLE LANGUAGE You can change the subtitle language. 1. Touch "Subtitle Language". 2. code, see page 226. To return to the "Setup Menu" screen, touch . DVD LANGUAGE You can change the language on the DVD video menu. 1. Touch "DVD Language". 2. Touch the language you want to - 2008 Toyota Land Cruiser | Navigation Manual - Page 224
AUDIO/VIDEO SYSTEM D Enter subtitle language code 0101 0102 0106 0113 0118 0119 0125 Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish If you touch "Other" on the "Select Audio Language" screen, "Select Subtitle Language" screen or "DVD Language" screen, you can select the - 2008 Toyota Land Cruiser | Navigation Manual - Page 225
AUDIO/VIDEO SYSTEM 0704 0712 0714 0721 0801 0809 0818 0821 0825 0901 0905 0911 0914 0919 0923 1009 1023 1101 1111 1112 1113 1114 1119 1121 1125 - 2008 Toyota Land Cruiser | Navigation Manual - Page 226
AUDIO/VIDEO SYSTEM 1914 1915 1917 1918 1919 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 2014 2015 a video CD Push the "AUDIO" button to display this screen. When you touch "WIDE", the screen mode can be changed. It you touch "PICTURE" when the vehicle is completely stopped and the parking - 2008 Toyota Land Cruiser | Navigation Manual - Page 227
AUDIO/VIDEO SYSTEM D track is searched and played. "Main/Sub": A multiplex transmission changing button. The mode changes from Main/Sub to Main, to Sub and back to Main or touch and hold it to play slowly. If you touch the part where touch−screen buttons are not located while you are watching video - 2008 Toyota Land Cruiser | Navigation Manual - Page 228
. For appropriate discs for this player, see "Audio/video system operating hints" on page 234. If "Region following causes are possible. D There is a trouble inside the system. Eject the disc. D The inside of the If the malfunction is not rectified: Take your vehicle to your dealer. If an MP3/WMA disc - 2008 Toyota Land Cruiser | Navigation Manual - Page 229
AUDIO/VIDEO SYSTEM (i) DVD player and DVD video disc information D DVD video discs This DVD player conforms to NTSC color TV formats. Region codes: Some DVD video discs have a region code indicating a country where you can use the DVD video disc on this DVD player. - 2008 Toyota Land Cruiser | Navigation Manual - Page 230
data assigned to the picture is changed depending on the picture format has also been adopted. Audio data is stored using by Macrovision Corporation and other rights owners. Use of this copyright protection engineering or disassembly is prohibited. "DTS" is a trademark of Digital Theater Systems, - 2008 Toyota Land Cruiser | Navigation Manual - Page 231
this again to find the next station. If you push either the " " or " " switch in seek mode, the seek mode will cancel. Some parts of the audio/video system can be adjusted with the switches on the steering wheel. Details of the specific switches, controls, and features are described below. 1 Volume - 2008 Toyota Land Cruiser | Navigation Manual - Page 232
Each time you push the "MODE" switch, the system changes the audio mode. The DVD player will be selectable if a rear seat entertainment system is installed in your vehicle. To turn the audio/video system on, push the "MODE" switch. To turn the audio/video system off, push and hold the "MODE" switch - 2008 Toyota Land Cruiser | Navigation Manual - Page 233
AUDIO/VIDEO SYSTEM cassette tape player and tapes: Clean the tape head and other parts regularly. D A dirty tape head or tape path can decrease high−quality cassettes: D Low−quality cassette tapes can cause many problems, including poor sound, inconsistent playing speed, and constant auto−reversing - 2008 Toyota Land Cruiser | Navigation Manual - Page 234
errors, use the appropriate file extensions. D The player can play only the first session using multi−session compatible CDs. D MP3 files are compatible with the ID3 Tag Ver. 1.0, Ver. 1.1, Ver. 2.2 (front audio system only), and Ver. 2.3 formats. The unit cannot display disc title, track title - 2008 Toyota Land Cruiser | Navigation Manual - Page 235
is possible to play up to 253 folders on one disc. D MP3/WMA player (front audio system)-It is possible to play up to 192 folders or 255 files on one disc. D The order changes depending on the PC and MP3/WMA encoding software you use. 001.mp3 002.wma Folder 1 003.mp3 - 2008 Toyota Land Cruiser | Navigation Manual - Page 236
AUDIO/VIDEO SYSTEM CD−R AND CD−RW DISCS D CD−R/CD−RW discs that have high temperature can keep your DVD changer and DVD player from working. On hot days, use air conditioning to cool the vehicle interior before you listen to a disc. D Bumpy roads or other vibrations may make your DVD changer - 2008 Toyota Land Cruiser | Navigation Manual - Page 237
AUDIO/VIDEO SYSTEM DVD changer Audio CDs DVD video discs " Special shaped discs DVD audio discs Video CDs D Use only discs marked as shown above. The following products may not be playable on your DVD changer. SACDs dts−CDs Copy− - 2008 Toyota Land Cruiser | Navigation Manual - Page 238
AUDIO/VIDEO SYSTEM " Labeled discs " Correct " Wrong D Handle discs carefully, especially NOTICE D Do not discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause damage to - 2008 Toyota Land Cruiser | Navigation Manual - Page 239
AUDIO/VIDEO SYSTEM To clean a disc: Wipe it with a soft, lint− free cloth that has been dampened with water. Wipe in a straight line from the center to the - 2008 Toyota Land Cruiser | Navigation Manual - Page 240
AUDIO/VIDEO SYSTEM m3u- Playlists created using "WINAMP" software have a playlist file extension (.m3u). MP3- MP3 is an audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on - 2008 Toyota Land Cruiser | Navigation Manual - Page 241
AIR CONDITIONING SECTION AIR CONDITIONING Air conditioning 7 D Automatic air conditioning controls ...244 243 - 2008 Toyota Land Cruiser | Navigation Manual - Page 242
AIR CONDITIONING Automatic air conditioning controls 1 2 3 4 5 6 Air flow control touch−screen buttons ...248 Rear air conditioning control touch−screen button ...250 "4ZONE" (Temperature setting mode change touch−screen button) ...247 Fan speed control touch−screen buttons ...249 "A/C" ...250 - 2008 Toyota Land Cruiser | Navigation Manual - Page 243
AIR CONDITIONING " Air flow selection Automatic air flow mode only 245 - 2008 Toyota Land Cruiser | Navigation Manual - Page 244
each indicator and display. When one of the manual control buttons is depressed while operating in automatic mode, the operation corresponding to the depressed button is set. Other conditions continue to be adjusted automatically. Push the "OFF" button to turn the air conditioning system off. 246 - 2008 Toyota Land Cruiser | Navigation Manual - Page 245
AIR CONDITIONING 2. Use the "TEMP " or "TEMP " button to set the desired vehicle interior temperature. The "TEMP " or "TEMP " selector button is used to set the desired interior temperature. The interior 's seat is changed in linked mode, the mode is changed automatically to independent mode. 247 - 2008 Toyota Land Cruiser | Navigation Manual - Page 246
is set. Other conditions continue to be adjusted automatically. If manual air flow selection is desired - Driver side setting air flow Passenger side setting air flow Mixed air flow The outlets from which air is delivered can be selected manually by touching the touch−screen button. The function - 2008 Toyota Land Cruiser | Navigation Manual - Page 247
the vehicle. For normal use, it is best to keep the air intake control button set to OUTSIDE AIR mode. If recirculated air is used during heating, the windows will fog up more easily. In the following cases, the RECIRCULATED mode may change to the OUTSIDE AIR mode automatically to prevent interior - 2008 Toyota Land Cruiser | Navigation Manual - Page 248
). If the system is used for ventilation, heating in dry weather or removing frost or exterior fog on the windshield, turn the air conditioning off once it is no longer required. This will improve fuel economy. The air conditioning can be used for year− round automatic temperature control including - 2008 Toyota Land Cruiser | Navigation Manual - Page 249
interior fog on the windshield - Push the windshield air flow air flow control to obtain a maximum air flow. 4. Leave the air conditioning on−off control off. When the windshield air flow button is pushed while operating in automatic mode, the air conditioning is set to operate and the OUTSIDE AIR - 2008 Toyota Land Cruiser | Navigation Manual - Page 250
CONDITIONING (d) Micro dust and pollen filter Outside air mode switches to recirculated air mode. Pollen is removed from air and the air flows to the upper part of the body. Usually the system will turn off automatically approximately 3 minutes later. To stop the operation, press the button again - 2008 Toyota Land Cruiser | Navigation Manual - Page 251
. (f) Checking and replacing the air conditioning filter The air conditioning filter information label is placed in the glove box as shown and indicates that a filter has been installed. The air conditioning filter prevents dust from entering the vehicle through the air conditioning vent. 253 - 2008 Toyota Land Cruiser | Navigation Manual - Page 252
, please refer to the "Warranty and Services Guide/Owner's Manual Supplement/ Scheduled Maintenance".) Before replacing the air conditioning filter, turn the "ENGINE START STOP" switch IGNITION ON mode and switch to recirculated air mode, then turn the "ENGINE START STOP" switch off. 1. Open the - 2008 Toyota Land Cruiser | Navigation Manual - Page 253
dirty, it should be replaced. When installing the filter in the filter case, keep the arrow pointing up. INFORMATION The air conditioning filter should be installed properly in position. The use of air conditioning with the filter removed may cause deteriorated dustproof performance and then affect - 2008 Toyota Land Cruiser | Navigation Manual - Page 254
AIR CONDITIONING 256 - 2008 Toyota Land Cruiser | Navigation Manual - Page 255
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM Rear view monitor system 8 D Rear view monitor system ...258 257 - 2008 Toyota Land Cruiser | Navigation Manual - Page 256
, be sure to check behind and all around the vehicle visually and with mirrors before proceeding. Do not use the system when the backdoor is not completely closed. If the back of the vehicle is hit, the position and mounting angle of the camera may change. Be sure to have the camera's position and - 2008 Toyota Land Cruiser | Navigation Manual - Page 257
around the vehicle visually and with mirror before proceeding. When replacing the tires, please consult your Toyota dealer. If you replace the tires, the area displayed on the screen may change. D Area displayed on screen Image is displayed approximately level on screen. " Corners of bumper The - 2008 Toyota Land Cruiser | Navigation Manual - Page 258
The area displayed on the screen may vary according to vehicle orientation or road conditions. The rear view monitor system camera is located on the back door as shown in the illustration. The camera uses a special lens. The distance of the image that appears on the screen differs from the actual - 2008 Toyota Land Cruiser | Navigation Manual - Page 259
VIEW MONITOR SYSTEM If a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera, the smear effect∗ peculiar to the camera may occur. ∗: Smear effect-A phenomenon that occurs when a bright light (for example, sunlight reflected off the vehicle body) is picked - 2008 Toyota Land Cruiser | Navigation Manual - Page 260
REAR VIEW MONITOR SYSTEM 262 - 2008 Toyota Land Cruiser | Navigation Manual - Page 261
APPENDIX SECTION APPENDIX Appendix 9 D Limitations of the navigation system ...264 D Map database information and updates ...266 263 - 2008 Toyota Land Cruiser | Navigation Manual - Page 262
. The GPS satellites may not send signals due to repairs or improvements being made to them. Even when the navigation system is receiving clear GPS signals, the vehicle position may not be shown accurately or inappropriate route guidance may occur in some cases. NOTICE The installation of window - 2008 Toyota Land Cruiser | Navigation Manual - Page 263
your vehicle cannot receive GPS signals, you can correct the current position manually. For driving. In auto reroute, a detour route may be shown. D After auto reroute, the route may not be changed. D An unnecessary U−turn may be shown or announced. D A location may have multiple names and the system - 2008 Toyota Land Cruiser | Navigation Manual - Page 264
- After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 111.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing tires that are larger or smaller than the originally equipped - 2008 Toyota Land Cruiser | Navigation Manual - Page 265
The Data for areas of Canada includes information taken with permission from Canadian system for the solely personal, non− commercial purposes for which you were licensed, and not for service reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer - 2008 Toyota Land Cruiser | Navigation Manual - Page 266
systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle due to the passage of time, changing circumstances, sources used and the nature , WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF [CLIENT] OR ITS LICENSORS - 2008 Toyota Land Cruiser | Navigation Manual - Page 267
Control. You agree not to export from anywhere any part of the Data provided to you or any direct conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State - 2008 Toyota Land Cruiser | Navigation Manual - Page 268
part of the DATABASE without the prior written consent of TANA and its licensors. LIMITATIONS ON USE The DATABASE is restricted for use in the specific system reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system for - 2008 Toyota Land Cruiser | Navigation Manual - Page 269
may contain inaccurate or incomplete information due to the passage of time, changing circumstances, and due to the nature of the sources used. The construction work; road or lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic - 2008 Toyota Land Cruiser | Navigation Manual - Page 270
the DATABASE held by you shall immediately be destroyed. If any court of competent jurisdiction considers this clause void and unenforceable, in whole or in part, for any reason, this Agreement shall be considered terminated and null and void, in its entirety, and any and all copies of the DATABASE - 2008 Toyota Land Cruiser | Navigation Manual - Page 271
SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part engineer any portion of the POI Data. 3. TRANSFER You may not transfer the POI Data to third parties, except together with the system non−commercial purposes, and not for service bureau, time−sharing or other similar - 2008 Toyota Land Cruiser | Navigation Manual - Page 272
ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF marks of their respective owners. The use of straight line from the current vehicle position to the destination area change. In some places, construction on roads may be in progress. For that reason, information on some areas in this system - 2008 Toyota Land Cruiser | Navigation Manual - Page 273
APPENDIX D To confirm the database version and disc coverage area The map database is normally updated once a year. Contact your dealer for updating a map database. 1. Push the "MENU" button. 2. Touch "Map DVD". 275 - 2008 Toyota Land Cruiser | Navigation Manual - Page 274
is a more recent update available. To eject the map disc, open the glove box DVD" switch. and touch the " The glove box must be opened first, or the disc will come into contact with the glove box door and be reinserted. 276 - 2008 Toyota Land Cruiser | Navigation Manual - Page 275
your purchase of the Navigation System. Please read this manual carefully to ensure proper use. Keep this manual in your vehicle at all times. The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global - 2008 Toyota Land Cruiser | Navigation Manual - Page 276
Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle condition or other circumstances. For more information on the - 2008 Toyota Land Cruiser | Navigation Manual - Page 277
. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire Navigation System Owner's Manual to - 2008 Toyota Land Cruiser | Navigation Manual - Page 278
determine the current vehicle position correctly, there is a possibility of incorrect, late, or non−voice guidance. The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before - 2008 Toyota Land Cruiser | Navigation Manual - Page 279
Quick guide - - Overview buttons and guidance screen No. 1 2 3 Name North−up or heading−up symbol Scale indicator Zoom out touch−screen button "Mark" "Route" "Map View" Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map orientation. This - 2008 Toyota Land Cruiser | Navigation Manual - Page 280
information. Page 104 8 34 9 35 10 Touch this button to change the screen mode. 32 11 Distance and time Displays the distance, the vehicle is receiving signals from the GPS, this mark is displayed. The microphone is shown by pushing the speech command switch. The speech command system can - 2008 Toyota Land Cruiser | Navigation Manual - Page 281
- Registering home 1 Push "MENU" button. 2 Touch "My Places". 3 Touch "Register" of the home. 4 There are 12 different methods to search your home. See "Destination search" on page 39. 7 - 2008 Toyota Land Cruiser | Navigation Manual - Page 282
5 Touch "Enter". The "Memory Point" screen is displayed. 6 Touch "OK". Registration of home is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 91.) 8 - 2008 Toyota Land Cruiser | Navigation Manual - Page 283
- Registering preset memory point (Quick access) 1 Push "MENU" button. 2 Touch "My Places". 3 Touch "Register" of the memory points. 4 There are 13 different methods to search preset destinations. See "Destination search" on page 39. 9 - 2008 Toyota Land Cruiser | Navigation Manual - Page 284
is displayed. 6 Touch "Quick Access". 7 Touch one of preset buttons 1 to 5. 8 Touch "OK". Registration of preset memory point is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 91.) The registered points can be used on - 2008 Toyota Land Cruiser | Navigation Manual - Page 285
13 different methods to search destinations. See "Destination search" on page 39. 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 57 - 2008 Toyota Land Cruiser | Navigation Manual - Page 286
has been registered. (To register "Home", see " - Registering home" on page 96.) 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 57 - 2008 Toyota Land Cruiser | Navigation Manual - Page 287
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation 1 D Initial screen ...22 D Touch screen operation ...23 D Inputting letters and numbers/List screen operation ...24 D Function help ...27 D Map screen operation ...Current position display ...Screen scroll operation ... - 2008 Toyota Land Cruiser | Navigation Manual - Page 288
vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen will be displayed when the navigation system is in operation. When the "ENGINE START STOP" switch is in ACCESSORY the "CAUTION" screen automatically switches to the map - 2008 Toyota Land Cruiser | Navigation Manual - Page 289
not use objects other than the finger to touch the screen. INFORMATION D If the system does not respond to a touch on a touch−screen button, move the finger away to clean the touch screen. D The displayed image may become darker and moving images may be slightly distorted when the display is cold - 2008 Toyota Land Cruiser | Navigation Manual - Page 290
can be input via the touch screen. D To input letters To display the alphabet keys, touch "A−Z" or " ". INFORMATION Keyboard layout can be changed. (See page 104.) Enter letters by touching the alphabet keys directly. Touching this button erases one letter. By holding this button, letters will - 2008 Toyota Land Cruiser | Navigation Manual - Page 291
and symbols To display the number keys and symbol keys, touch "0−9". D To display the list Enter numbers and symbols by touching the number keys and symbol keys directly. : Touching this button erases number of matching items is more than 9,999, the system displays "**** " on the screen. 25 - 2008 Toyota Land Cruiser | Navigation Manual - Page 292
BASIC FUNCTIONS D List screen operation When a list is displayed, use the appropriate button to scroll through the list. D Sorting The order of a list displayed on the screen can be rearranged. TYPE A To shift to the next or previous page. To scroll up or down one item at a time. This expresses a - 2008 Toyota Land Cruiser | Navigation Manual - Page 293
the "Destination", "Setup" and "Menu" screens can be viewed. "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle position up to the destination is displayed to the right of the name. "Name Sort": To sort in alphabetical order by name - 2008 Toyota Land Cruiser | Navigation Manual - Page 294
system, the current position is displayed first. This screen displays the current vehicle position driving, the current vehicle position mark is fixed on the screen and the map moves. The current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System - 2008 Toyota Land Cruiser | Navigation Manual - Page 295
. D To register the cursor position as a memory point Memory point registration enables easy access to a specific point. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 57.) Touch "Mark - 2008 Toyota Land Cruiser | Navigation Manual - Page 296
BASIC FUNCTIONS Up to 106 memory points can be registered. If there is an attempt to register more than 106, a message appears for confirmation. POI INFORMATION When the cursor is set on a POI icon, the name and "Info." are displayed on the top of the screen. D To see information about the icon - 2008 Toyota Land Cruiser | Navigation Manual - Page 297
BASIC FUNCTIONS MEMORY POINT INFORMATION When the cursor is set on a memory point icon, the name and "Info." are displayed on the top of the screen. DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. Touch "Info.". - 2008 Toyota Land Cruiser | Navigation Manual - Page 298
BASIC FUNCTIONS - Switching the screens Any one of the screen configurations can be selected . Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 33.) : To display the dual map screen. (See page 33.) : To display the - 2008 Toyota Land Cruiser | Navigation Manual - Page 299
map can be edited. Touch the right side map to display the edit screen. This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Changing the orientation of the map Touch "OK" when you complete editing. The screen returns to the dual map screen. 33 - 2008 Toyota Land Cruiser | Navigation Manual - Page 300
mark is displayed in the direction of the destination. When driving refer to the longitude and latitude coordinates, and the compass, to make sure that your vehicle is headed in the direction of the destination. or until the scale bar Touch changes. By continuing to touch the button, the scale bar - 2008 Toyota Land Cruiser | Navigation Manual - Page 301
not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one way street is displayed by . D It is not possible to perform scrolling on the foot print map (one− touch scroll) while driving - 2008 Toyota Land Cruiser | Navigation Manual - Page 302
, touch the building name. You can see details of the selected POIs. " North−up screen " Heading−up screen The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. North−up symbol Regardless of the direction - 2008 Toyota Land Cruiser | Navigation Manual - Page 303
DESTINATION SEARCH SECTION DESTINATION SEARCH Destination search 2 39 40 42 42 43 46 49 52 53 53 54 54 55 56 57 57 D Quick reference ("Destination" screen) ...38 D Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Quick access ...Destination - 2008 Toyota Land Cruiser | Navigation Manual - Page 304
by using the input keys...43 2 "POI Name" Select one of the many POIs (Points of Interest) that have already been stored in the system's database...46 3 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...52 7 "Map" A - 2008 Toyota Land Cruiser | Navigation Manual - Page 305
(interstate) entrance or exit can be entered...55 10 "?" Function help for the "Destination" screen can be viewed on this screen...27 11 "Change" To change the search area, touch this button...40 12 Quick access touch−screen buttons One of 5 preset destinations can be selected by touching the screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 306
from a different area by using "Address", "POI Name", "Freeway Ent./ Exit" or "Intersection". 2. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 11 areas. (For map database information and updates, see "Map database information and updates - 2008 Toyota Land Cruiser | Navigation Manual - Page 307
New Jersey New York Rhode Island Vermont "US10" "US9" Washington, DC Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Florida Georgia North Carolina South Carolina Canada "US3" Button "CAN" Provinces and regions included in the search area All provinces and regions in - 2008 Toyota Land Cruiser | Navigation Manual - Page 308
the quick access touch−screen buttons on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route vehicle position to your home if "Enter" is touched even while driving. INFORMATION Guidance starts from the current vehicle position - 2008 Toyota Land Cruiser | Navigation Manual - Page 309
to input a house number. After inputting a house number, touch "OK" to display the screen for inputting a street name. It is possible to input a street name first. Touch "Street" to display the screen for inputting a street name. 2. Input the street name and touch "List". 43 - 2008 Toyota Land Cruiser | Navigation Manual - Page 310
"Starting route guidance" on page 57.) If the same address exists in more than one city, the current screen changes to the city list screen. If inputting a street name first, the screen changes. The house number can then be input. If the above screen appears, an address range on the screen can be - 2008 Toyota Land Cruiser | Navigation Manual - Page 311
the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 3. Touch the button of the desired city name from the - 2008 Toyota Land Cruiser | Navigation Manual - Page 312
the button of the desired city name. If the navigation has not be used, no cities will be displayed on the screen. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 43.) 4. Touch the button of the - 2008 Toyota Land Cruiser | Navigation Manual - Page 313
search by city, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 47 - 2008 Toyota Land Cruiser | Navigation Manual - Page 314
DESTINATION SEARCH INPUTTING THE CITY NAME 1. Touch "Input City Name". SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". 2. Input the city name. 2. Touch the button of the desired city name. SELECTING FROM THE LAST 5 CITIES 3. Touch the button of the desired city name from the - 2008 Toyota Land Cruiser | Navigation Manual - Page 315
DESTINATION SEARCH - Destination search by "POI Category" (b) Selecting from the categories The destination can be set by selecting the search point and the POI category. 1. Push the "DEST" button. 2. Touch "POI Category" on the "Destination" screen. Touch "Category". If the desired POI category - 2008 Toyota Land Cruiser | Navigation Manual - Page 316
DESTINATION SEARCH INPUTTING THE CITY CENTER 1. Touch "Input City Center". SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. - 2008 Toyota Land Cruiser | Navigation Manual - Page 317
DESTINATION SEARCH SETTING THE SEARCH POINT FROM DESTINATIONS 1. Touch the destination buttons at the bottom of the screen. D To search POIs near the search point When the search point is set, the "POI Category" screen will be displayed. When an arrow facing the desired point is touched, the map - 2008 Toyota Land Cruiser | Navigation Manual - Page 318
The display changes to a screen to select police stations, dealers, hospitals or fire stations. While driving, only changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 57.) INFORMATION The navigation system does not guide - 2008 Toyota Land Cruiser | Navigation Manual - Page 319
" screen. 3. Touch the button of your desired memory point. The screen changes and displays the map location of the selected destination and the route preference. . 3. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the - 2008 Toyota Land Cruiser | Navigation Manual - Page 320
" on the second page of the "Destination" screen. The screen changes and displays the map location that was previously displayed just before the to be set. INFORMATION Guidance starts if "Enter" is touched even while driving. However, the cursor cannot be moved. 4. Touch the button of the - 2008 Toyota Land Cruiser | Navigation Manual - Page 321
Touch "Freeway Ent./Exit" on the second page of the "Destination" screen. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination and - 2008 Toyota Land Cruiser | Navigation Manual - Page 322
. 3. Input the latitude and the longitude. 4. When the input is finished, touch "OK". By touching the button of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 57.) 5. Touch the button of - 2008 Toyota Land Cruiser | Navigation Manual - Page 323
the arrow will stop the scrolling. 2. Touch "Enter". The system starts route search and displays recommended routes. If there is already To delete the existing destinations and set a new one. "Route Preference": To change the route preference. (See page 59.) "Info.": If this button is displayed - 2008 Toyota Land Cruiser | Navigation Manual - Page 324
(800 m) automatically. Set the destination again. D If a destination is entered, the road nearest to the point you selected is set as the destination. CAUTION Be sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the - 2008 Toyota Land Cruiser | Navigation Manual - Page 325
change route preference by touching "Route Preference". 2. Select the desired route preference by touching the button. When searching for a route, the system by ferry, the current vehicle position may be incorrect. Upon reception of GPS signals, it is automatically corrected. 2. Touch "Quick1 - 2008 Toyota Land Cruiser | Navigation Manual - Page 326
DESTINATION SEARCH 1 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 60 - 2008 Toyota Land Cruiser | Navigation Manual - Page 327
ROUTE GUIDANCE SECTION ROUTE GUIDANCE Route guidance 3 D Route guidance screen ...62 D Typical voice guidance prompts ...65 D Distance and time to destination ...67 D Setting and deleting destination ...Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route ... - 2008 Toyota Land Cruiser | Navigation Manual - Page 328
displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway exit information screen will be displayed. This Current position Guidance route 1 2 3 4 5 INFORMATION D If the vehicle goes off the guidance route, the route is searched again. D For - 2008 Toyota Land Cruiser | Navigation Manual - Page 329
junction, the guidance screen for the freeway will be displayed. D When approaching a freeway exit or D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. Road/area name 2 Distance from the current position to the exit - 2008 Toyota Land Cruiser | Navigation Manual - Page 330
ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching the turn list. during guidance displays ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays - 2008 Toyota Land Cruiser | Navigation Manual - Page 331
prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.25 miles 4.7 miles 0.25 miles +α 1 2 1 2 3 4 "Proceed about 4 miles to the traffic circle." In a quarter of a mile, traffic circle ahead, and - 2008 Toyota Land Cruiser | Navigation Manual - Page 332
is now finished." 1 2 3 "In half of a mile, make a legal U−turn." "Make a legal U−turn ahead." (Beep sound only) INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made early or delayed. D If you - 2008 Toyota Land Cruiser | Navigation Manual - Page 333
time. Displayed while driving off the guidance route. The destination direction is indicated by an arrow. INFORMATION When the vehicle is on the time and arrival time is calculated based on the set vehicle speed information. (See page 103.) However, when the vehicle is not on the guidance route, - 2008 Toyota Land Cruiser | Navigation Manual - Page 334
Adding destinations and searching again for the routes can be done. - Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 1. Touch "Route". 1. Touch "Route". 2. Touch "Add". 3. Input an additional destination in the same way as the - 2008 Toyota Land Cruiser | Navigation Manual - Page 335
previously input number. 4. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. Even if "OK" is not touched, the entire route is displayed automatically within a few seconds when the order is fixed. 1. Touch "Route". - 2008 Toyota Land Cruiser | Navigation Manual - Page 336
is touched, the previous screen will return. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. 1. Touch "Route". 2. Touch "Search Condition". 3. Touch "Quick", "Quick1", "Quick2" or - 2008 Toyota Land Cruiser | Navigation Manual - Page 337
the route where a delay is caused by road repairs, or an accident, etc. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 68 and 70.) 1. Touch "Route". 2. Touch "Detour". 71 - 2008 Toyota Land Cruiser | Navigation Manual - Page 338
. This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates the detour suggested by the system. INFORMATION D When your vehicle is on - 2008 Toyota Land Cruiser | Navigation Manual - Page 339
number of choices are provided on the conditions which the system uses to determine the route to the destination. - the freeway, but the vehicle is driven parallel along the freeway.) 1. Touch "Route". 1. Touch "Route". 2. Touch "Route Preference" to change the conditions that determine the - 2008 Toyota Land Cruiser | Navigation Manual - Page 340
POI icons Points of Interest such as gas stations and restaurants can be displayed on nearest Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 20 miles (32 km). (See page 75.) Touch " (To change the displayed POI, see page 105.) 74 - 2008 Toyota Land Cruiser | Navigation Manual - Page 341
ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 20 miles (32 km) of the current position will be listed from among the selected categories. Select the desired POI categories. The selected category icon appears on the top left of the screen. By selecting the - 2008 Toyota Land Cruiser | Navigation Manual - Page 342
current vehicle position to the POI. 2. When the desired Point of Interest overlaps with the cursor, touch "Enter ". The screen changes and route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 68 and 70.) "Turn List": - 2008 Toyota Land Cruiser | Navigation Manual - Page 343
. However, not all road touching names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the - 2008 Toyota Land Cruiser | Navigation Manual - Page 344
ROUTE GUIDANCE - Route trace It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 - 2008 Toyota Land Cruiser | Navigation Manual - Page 345
ROUTE GUIDANCE Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is erased. 79 - 2008 Toyota Land Cruiser | Navigation Manual - Page 346
ROUTE GUIDANCE 80 - 2008 Toyota Land Cruiser | Navigation Manual - Page 347
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use 4 D Quick reference ("Menu" screen) ...82 D Quick reference ("Setup" screen) ...83 D Suspending and resuming guidance ...84 D Volume ...85 D User selection ...86 D My places ...89 Registering memory - 2008 Toyota Land Cruiser | Navigation Manual - Page 348
area...266 1 5 "Select User" Up to 3 different settings for different users can be memorized...86 6 "Setup" Enables various settings for the navigation system...83, 102 7 "My Places" Enables changes to "Memory points", "Home" and "Areas to avoid". Enables deletion of the previous point...89 82 - 2008 Toyota Land Cruiser | Navigation Manual - Page 349
"miles" can be selected...102 2 "Estimated Travel Time" The system to display the travel time and the arrival time to the destination on the route guidance screen can be set. . 103 3 "Keyboard Layout" Key layout can be changed...104 4 " Function" The choice whether to display each touch− screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 350
guidance can be set in all modes...107 10 "Auto Voice Guidance" Automatic voice guidance can be set...108 11 "Pop−up Message" Selection of possible...108 12 "Calibration" Adjustment of the current vehicle position mark can be done manually...109 13 "Default" This touch−screen button initializes all - 2008 Toyota Land Cruiser | Navigation Manual - Page 351
. The voice guidance volume can be adjusted or switched off. 4U5551T 2. Touch "Resume Guidance". 1. Push the "MENU" button. 4U5552T The screen will change to the current position map with route guidance. 2. Touch "Volume". To adjust the volume, select the desired level by touching the appropriate - 2008 Toyota Land Cruiser | Navigation Manual - Page 352
even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km/h). To turn the "Adaptive Volume Control" system on, touch the button. The indicator - 2008 Toyota Land Cruiser | Navigation Manual - Page 353
ADVANCED FUNCTIONS D To register 1. Push the "MENU" button. 1. Touch "Memorize". The confirmation screen will be displayed. 4U5553T 2. Touch "Select User". 2. To register, touch "Yes". To return to the previous screen, touch "No" or . When a button that is already registered is touched, the - 2008 Toyota Land Cruiser | Navigation Manual - Page 354
ADVANCED FUNCTIONS D To change user D To delete user Touch "User number". 1. Touch "Delete". The confirmation screen will be displayed. The above message appears, then the map screen will be displayed. 2. To delete, touch "Yes". To return to the previous screen, touch "No" or . 88 - 2008 Toyota Land Cruiser | Navigation Manual - Page 355
ADVANCED FUNCTIONS My places - Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 42, " - Destination search by Quick access" on page 42 and " - Destination search by Memory" on page 53.) - 2008 Toyota Land Cruiser | Navigation Manual - Page 356
ADVANCED FUNCTIONS - Registering memory points 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 5. Touch "OK". To edit registered information, see " - Editing memory Points" on page 91. 3. Touch "Register". INFORMATION Up to 106 memory points can be registered. 4. Enter the - 2008 Toyota Land Cruiser | Navigation Manual - Page 357
ADVANCED FUNCTIONS - Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 3. Touch "Edit". 5. Touch the button to be edited. "Icon": To select icons to be - 2008 Toyota Land Cruiser | Navigation Manual - Page 358
"Icon" 1. Touch "Icon" on the "Memory Point" screen. SOUND ICONS When the vehicle approaches the memory point, the selected sound will be heard. 1. Touch "with Sound" on the "Change Icon" screen. 2. Touch the desired icon. Turn the page by touching "Page 1", "Page 2" or "with Sound". 2. Touch - 2008 Toyota Land Cruiser | Navigation Manual - Page 359
"Quick Access" It is possible to change attributes of the quick access points. Memory points with a set attribute can be used as a "Quick Access" or "Home" touch−screen button. (See " - Destination search - 2008 Toyota Land Cruiser | Navigation Manual - Page 360
"Name" 1. Touch "Name" on the "Memory Point" screen. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. DISPLAYING MEMORY POINT NAMES The - 2008 Toyota Land Cruiser | Navigation Manual - Page 361
"My Places" on the "Menu" screen. 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 3. Touch "Delete". 4. Touch the button to be deleted. "Delete All": To delete all memory points in the system. 5. To delete the memory point, touch "Yes". To cancel the - 2008 Toyota Land Cruiser | Navigation Manual - Page 362
ADVANCED FUNCTIONS - Registering home If home has been registered, that information can be recalled by using the "Home" touch−screen button on the "Destination" screen. (See " - Destination search by Home" on page 42.) 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 5. Touch " - 2008 Toyota Land Cruiser | Navigation Manual - Page 363
ADVANCED FUNCTIONS - Deleting home 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. - Registering area to avoid Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 1. Push the "MENU" button. 2. Touch "My - 2008 Toyota Land Cruiser | Navigation Manual - Page 364
eight directional touch− to screen button to move the cursor the desired point on the map. 6. Touch "Enter". 3. Touch "Edit". 7. Touch either or to change the size of the area to be avoided. 8. Touch "OK". 4. Touch the desired area button. INFORMATION D If a destination is input in the area to - 2008 Toyota Land Cruiser | Navigation Manual - Page 365
ADVANCED FUNCTIONS D To change "Name" 1. Touch "Name" on the "Edit Area to Avoid" screen touch "OFF" on the "Edit Area to Avoid" screen. 6. Touch "OK". 2. Enter the name using alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. DISPLAYING NAMES - 2008 Toyota Land Cruiser | Navigation Manual - Page 366
" 1. Touch "Location" on the "Edit Area to Avoid" screen. D To change "Area Size" 1. Touch "Area Size" on the "Edit Area to Avoid" ". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 100 - 2008 Toyota Land Cruiser | Navigation Manual - Page 367
. 3. Touch "Delete". 3. Touch "Delete Previous Points". 4. Touch the button to be deleted. "Delete All": To delete all registered areas to avoid in the system. 5. To delete the area, touch "Yes". To cancel the deletion, touch "No". 4. Touch the button you want to delete. "Delete All": To delete - 2008 Toyota Land Cruiser | Navigation Manual - Page 368
ADVANCED FUNCTIONS Setup Setting the items shown on the "Setup" screen can be done. (See page 83.) D Distance unit Distance unit can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 1. Push the "MENU" button. 3. Touch "km" or "miles" of "Distance" to choose the - 2008 Toyota Land Cruiser | Navigation Manual - Page 369
D The displayed time to the destination is the approximate driving time that is calculated based on the selected speeds and the actual position along the of the "Estimated Travel Time". 4. Touch or to set the average vehicle speeds for "Residential", "Main street", and "Freeway". To set the - 2008 Toyota Land Cruiser | Navigation Manual - Page 370
the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 3. Touch "ABC" or "QWE" of "Keyboard Layout" to choose the input key layout. LAYOUT TYPE 3. Touch "Change" of " Function". " "ABC" type 4. Touch the button to be turned off. The button becomes dimmed. To set the default, touch "Default - 2008 Toyota Land Cruiser | Navigation Manual - Page 371
ADVANCED FUNCTIONS D POI category change (Display POI Icons) Select from among the 6 icons displayed on the "Display POI Icons the category button to be displayed on the "Display POI Icons" top screen. 6. Touch "OK". 3. Touch "Change" of "Display POI Icons". 4. Touch the category button to be - 2008 Toyota Land Cruiser | Navigation Manual - Page 372
touch to display page 2 of the "Setup" screen. D Notifying traffic restriction When the "Traffic Restrict. Notification" feature is turned on, the system notifies you of traffic or seasonal restrictions. To turn the "Traffic Restrict. Notification" on: 1. Push the "MENU" button. 2. Touch "Setup" on - 2008 Toyota Land Cruiser | Navigation Manual - Page 373
feature is turned on, the voice recognition guidance can be heard automatically. To turn the "Voice Recognition Guidance" on: 1. Push the in All Modes" feature is turned off, voice guidance cannot be heard when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" - 2008 Toyota Land Cruiser | Navigation Manual - Page 374
ADVANCED FUNCTIONS D Auto voice guidance When the "Auto Voice Guidance" feature is turned on, the voice guidance can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance can be heard only if the "MAP/VOICE" button is pushed. To turn - 2008 Toyota Land Cruiser | Navigation Manual - Page 375
messages will not displayed. D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement on the accuracy of a current vehicle position, see "Limitations of the navigation system" on page 264. 109 - 2008 Toyota Land Cruiser | Navigation Manual - Page 376
ADVANCED FUNCTIONS POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 4. Touch either or to adjust the direction of the - 2008 Toyota Land Cruiser | Navigation Manual - Page 377
the tires are replaced, the current vehicle position mark may be incorrectly displayed. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 378
ADVANCED FUNCTIONS 112 - 2008 Toyota Land Cruiser | Navigation Manual - Page 379
Editing a memo ...Memo list ...D Hands−free system (for cellular phone) ...Enter a Bluetooth phone ...Call on the Bluetooth phone ...Receive on the Bluetooth phone ...Talk on the Bluetooth phone ...Changing the setting of the Bluetooth phone ...D Speech command system ...120 121 121 123 127 130 137 - 2008 Toyota Land Cruiser | Navigation Manual - Page 380
the navigation System is turned on, the "Information" screen displays when it is time to replace a part or certain system is turned on. (See page 22.) If "OFF" is selected, the "Information" screen is disabled. When the vehicle needs to be serviced, the touch−screen button color will change - 2008 Toyota Land Cruiser | Navigation Manual - Page 381
engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF (Automatic Transmission Fluid) "SERVICE": Scheduled maintenance "AIR FILTER": Replace air filter information, please refer to the "Owner's Manual Supplement/Scheduled Maintenance". D Depending on driving or road conditions, the actual - 2008 Toyota Land Cruiser | Navigation Manual - Page 382
OTHER FUNCTIONS - Dealer setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "INFO" button. 2. Touch "Maintenance" on the "Information" screen. 3. Touch "Set Dealer" on - 2008 Toyota Land Cruiser | Navigation Manual - Page 383
"Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. 2. Touch the eight directional touch− to screen button - 2008 Toyota Land Cruiser | Navigation Manual - Page 384
informs you of the memo entry when the system is turned on. (See page 23.) Memos can also be used for route guidance if the memo has been registered with location information. 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 1. Push the "INFO" button - 2008 Toyota Land Cruiser | Navigation Manual - Page 385
of the mark displayed next to the date. To default the mark color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date color" screen. "Prev. Day": To go to the "Memo" screen of the previous date. "Today": To - 2008 Toyota Land Cruiser | Navigation Manual - Page 386
informs of the memo entry when the system is started on the memo date. (See page 23.) 1. Push the "INFO" button. 2. Touch "Calendar" on the "Information" screen. 3. Touch the date you want to add a memo on the "Calendar" screen. 6. Enter text using the keys. Up to 24 letters can be entered. After - 2008 Toyota Land Cruiser | Navigation Manual - Page 387
period. (See page 122.) 5. Touch the item to be edited. "Memo": To edit a memo. (See " - Adding a memo" on page 120.) "Location": To change a registered location. (See " - Adding a memo" on page 120.) "Enter ": To set the registered location as a destination. (See "Starting route guidance" on page - 2008 Toyota Land Cruiser | Navigation Manual - Page 388
the displayed memos. A message will be displayed. 6. To delete, touch "Yes". To cancel the deletion, touch "No". 2. Enter the period using the numeral keys. The period from January 1, 2005 through December 31, 2024 can be set for searching. 3. After setting the period, touch "OK". The "Memo List - 2008 Toyota Land Cruiser | Navigation Manual - Page 389
wheel by connecting your cellular phone. This system supports Bluetoothr. Bluetoothr is a wireless data system by which you can call without your CAUTION While driving, do not use a cellular phone or connect the Bluetooth phone. NOTICE Do not leave your cellular phone in the car. The temperature - 2008 Toyota Land Cruiser | Navigation Manual - Page 390
. D The sound of the air−conditioning fan is loud. " Microphone You can use the microphone above when talking on the phone. The other party's voice outputs from the driver's speaker. When the received calls or received voice outputs, the audio from the audio system or voice guidance from the - 2008 Toyota Land Cruiser | Navigation Manual - Page 391
not support HFP, you cannot enter the Bluetoothr phone, and take OPP service individually. Empty Full It is not displayed while the Bluetoothr is connecting or the phone book data is being transferred. The amount left does not always correspond with the one of your cellular phone. This system doesn - 2008 Toyota Land Cruiser | Navigation Manual - Page 392
the seat or in the glove box and console box). D Your cellular phone touches or is covered with metal materials. Leave the Bluetoothr phone on the place where "Blue" indication is displayed. FCC ID: BABBT015A MADE IN JAPAN This device complies with Part 15 of the FCC Rules. Operation is subject - 2008 Toyota Land Cruiser | Navigation Manual - Page 393
"Telephone" screen. You can also push of the steering wheel to display this screen when the vehicle is stopped. 5. Touch "Register" to connect your cellular phone to the system. *: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 3. Touch "Settings" to display "Settings" screen. 127 - 2008 Toyota Land Cruiser | Navigation Manual - Page 394
OTHER FUNCTIONS 6. When this screen is displayed, input the Passkey displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". When this screen is displayed, follow the guidance on the screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 395
AUTOMATICALLY MANUALLY When the auto connection failed or turned off, you have to connect Bluetoothr manually. automatically connected and the connection result is displayed. This screen appears when the Bluetoothr phone is first connected after the "ENGINE START STOP" switch is in the ACCESSORY - 2008 Toyota Land Cruiser | Navigation Manual - Page 396
when the "ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode, the system automatically reconnects the system. You can call using the 7 methods described below. D By dial You can call by inputting the telephone number. This cannot be operated while driving. Touch the desired key - 2008 Toyota Land Cruiser | Navigation Manual - Page 397
data which is transferred from your cellular phone. The system has one phone book. You can register up to 1000 numbers. This cannot be operated while driving. 2. Select the desired number from the list. 1. Touch "Phone Book" to display "Phone Book" screen. Touch wheel. or push of the steering - 2008 Toyota Land Cruiser | Navigation Manual - Page 398
OTHER FUNCTIONS D By dialed numbers You can call by dialed number. The system memorizes up to 5 dialed numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. D When you call by phone book, the name (if registered) is displayed. D When you call the same - 2008 Toyota Land Cruiser | Navigation Manual - Page 399
You can call by received calls. When a call is received, the system memorizes up to 5 numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. D When a telephone number registered in phone book is received, the name and the number are displayed. D Received - 2008 Toyota Land Cruiser | Navigation Manual - Page 400
which you selected from a phone book, dialed numbers and received calls. operation and command of voice recognition, see "Speech command system" on page 171 and "Help screen" on page 173 change the page by touching "Speed Dial 2" or "Speed Dial 3". When you push the telephone switch while driving, - 2008 Toyota Land Cruiser | Navigation Manual - Page 401
the beep, please say "Dial"." You: "Dial." System: "Dialing the name." Now you can call Charlize. "Next" is displayed when multiple entries are found for a searched name. Up to 6 entries can be displayed including the first searched one. Do the following to change the entry to the next one. D Touch - 2008 Toyota Land Cruiser | Navigation Manual - Page 402
can call by giving a desired number. SENDING A TONE You can send a tone by giving a desired number. You: System: Push the talk switch. "After the beep, please say the number." You: "812387." System: "When ready, please briefly push the talk switch or push the off−hook switch to dial." You: Push - 2008 Toyota Land Cruiser | Navigation Manual - Page 403
OTHER FUNCTIONS - Receive on the Bluetooth r phone D By POI call You can call by touching when it is displayed on the screen from navigation system. (See page 30 for details.) When a call is received, this screen is displayed with a sound. Touch or push of the steering wheel to talk on - 2008 Toyota Land Cruiser | Navigation Manual - Page 404
a Key: Touch "0−9". To transfer the call Touch "Transfer Call". You cannot change from Hands−free call to cellular phone call while driving. When you change from of the phone, see the manual that comes with your cellular phone. Touch the desired number to input the key. To hang up the phone: - 2008 Toyota Land Cruiser | Navigation Manual - Page 405
number. (ex. 056133p0123w#1:) You can do this operation when you want to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the code number in the phone book. 1. Touch "Speed Tone". 2. Touch the desired switch to send a tone. 139 - 2008 Toyota Land Cruiser | Navigation Manual - Page 406
number from phone book, dialed numbers and received calls. Up to 17 speed dial numbers can be registered. The 6th entry is the speed dial for redialing. Touch "Settings" to display "Settings" screen. 1. Touch "Speed Dial" to display the "Speed Dial Settings" screen. You can change the settings of - 2008 Toyota Land Cruiser | Navigation Manual - Page 407
OTHER FUNCTIONS D Deleting the speed dial individually You can delete "01" − "17" of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. 4. Touch the desired telephone number. 1. Touch "Delete" of "Speed Dial". 5. Touch the touch−screen button you want to - 2008 Toyota Land Cruiser | Navigation Manual - Page 408
OTHER FUNCTIONS D Deleting all of the speed dial (b) Registering the speed tone You can register the desired tone number. Up to 6 speed tone numbers can be registered. 1. Touch "Delete All" of "Speed Dial". 1. Touch "Register" of "Speed Tone". 2. Touch "Yes". 2. Use the software keyboard to - 2008 Toyota Land Cruiser | Navigation Manual - Page 409
OTHER FUNCTIONS D Editing the speed tone You can edit the speed tone. 3. Input the number and touch "OK". 1. Touch "Edit" of "Speed Tone". 4. Touch the desired touch−screen button you want to register in. 2. Touch the touch−screen button you want to edit. If you select a touch−screen button you - 2008 Toyota Land Cruiser | Navigation Manual - Page 410
OTHER FUNCTIONS D Deleting the speed tone individually You can delete "1" to "6" of the speed tone. If you delete them all at once, all of 6 numbers are deleted. 3. Use the software keyboard to input the name. 1. Touch "Delete" of "Speed Tone". 4. Input the number and touch "OK". 2. Touch the - 2008 Toyota Land Cruiser | Navigation Manual - Page 411
OTHER FUNCTIONS D Deleting all the speed tone (c) Setting the volume 1. Touch "Delete All" of "Speed Tone". 1. Touch "Volume" to display the "Volume Settings" screen. 2. Touch "Yes". 2. Touch "−" or "+" to adjust the "Voice Volume" or "Ring Volume". "Voice Volume" ...Adjusting the other party - 2008 Toyota Land Cruiser | Navigation Manual - Page 412
OTHER FUNCTIONS D Automatic volume settings for high speed You can set the volume one step up when the speed is over 50 mph (80 km/h). (When it is - 2008 Toyota Land Cruiser | Navigation Manual - Page 413
OTHER FUNCTIONS (d) Setting the screen D Incoming call display You can select the method of the receiving call display. 1. Touch "Screen" to display the "Screen Settings" screen. Touch "Full" or "Icon". "Full" mode ...When a call is received, the Hands− free screen is displayed and you can - 2008 Toyota Land Cruiser | Navigation Manual - Page 414
automatically changes ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode and the Bluetoothr is automatically connected, the connection check is displayed. Touch "ON" or "OFF" of "Show Bluetooth* connection status at startup". *: Bluetooth is a registered trademark of Bluetooth - 2008 Toyota Land Cruiser | Navigation Manual - Page 415
FUNCTIONS D Initializing the settings You can initialize the settings. (e) Setting the phone book You can register phone numbers in the phone book. Touch "Default". Touch "Phone Book" to display the "Phone Book Management" screen. Touch "Yes". You can do the detail settings of phone book. 149 - 2008 Toyota Land Cruiser | Navigation Manual - Page 416
. Up to 1000 person's data (up to 2 numbers a person) can be registered in the phone book. Transfer it while the engine is running. 4. Transfer the phone book data to the system using the Bluetoothr phone. This screen appears while transferring. To cancel it, touch "Cancel". If the transferring - 2008 Toyota Land Cruiser | Navigation Manual - Page 417
data. D Editing the name When you don't input the name, the number is displayed. 1. Touch "Register" of "Phone Book". 1. Touch "Name". 2. Touch the desired touch−screen button to edit the phone book. 2. Use the software keyboard to input the name. 3. When you complete the edit, touch "OK". 151 - 2008 Toyota Land Cruiser | Navigation Manual - Page 418
OTHER FUNCTIONS D Editing the phone number You can register a phone number in "TEL1" and "TEL 2" separately. Up to 2 numbers a person can be registered. D Selecting the group You can set a group for a contact (for example: "Family", "Friends", "Office"...). It will then be easier for you to find - 2008 Toyota Land Cruiser | Navigation Manual - Page 419
can set the voice recognition. Up to 20 numbers can be registered for the voice recognition. D Adding the data to the phone book You can add data to the phone book. 1. Touch "Add to". 1. Touch "Voice Rec.". 2. Select the data you want to add log data to. 2. Select the phone number and - 2008 Toyota Land Cruiser | Navigation Manual - Page 420
OTHER FUNCTIONS D Editing the data You can edit the registered data. 1. Touch "Edit". 3. Touch the desired touch−screen button. When you edit the data, touch "OK". 2. Select the data you want to edit. When you also touch "Edit" on this screen, you can edit it. 154 - 2008 Toyota Land Cruiser | Navigation Manual - Page 421
Deleting the data You can delete the data. When you release your car, delete all your data on the system. You can also delete it in the following way. 1. Touch "Phone Book". 1. Touch "Delete" of "Phone Book". 2. Select the desired data. 2. Touch the desired touch−screen button. 3. Touch "Delete - 2008 Toyota Land Cruiser | Navigation Manual - Page 422
OTHER FUNCTIONS D Deleting all the phone data 4. Touch "Yes". 1. Touch "Delete All" of "Phone Book". 2. Select the deleting method. "Group Data" ...Deleting all the phone data in group. "All Contact Data" ...Deleting all the phone data. 156 - 2008 Toyota Land Cruiser | Navigation Manual - Page 423
OTHER FUNCTIONS 3. When you select "Group Data", the "Select Group" screen is displayed. You can also delete it in the following way. 4. Select the desired group. 1. Touch "Phone Book". 5. Touch "Yes". 2. Touch "Delete All". 3. Touch "Yes". 157 - 2008 Toyota Land Cruiser | Navigation Manual - Page 424
FUNCTIONS D Registering a group name You can register 20 groups. "No Group", "Group 01" − "Group 19" are registered by default. You can change "Group 01" − "Group 19" into desired names. D Selecting a group icon 1. Touch "Icon". 1. Touch "Register" of "Group Name". 2. Select the desired icon - 2008 Toyota Land Cruiser | Navigation Manual - Page 425
OTHER FUNCTIONS D Editing a group name D Deleting a group name You can delete the group names individually or all at once. If you delete a group name, that group will return to the default setting (excluding "No Group"). 1. Touch "Name". 1. Touch "Delete" of "Group Name". 2. Use the software - 2008 Toyota Land Cruiser | Navigation Manual - Page 426
the group name D Deleting the log data You can delete the log data individually or all at once. When you release your car, delete all the data on the system. INDIVIDUALLY 1. Touch Name". "Delete All" of "Group 1. Touch "Delete" on the "Log Data" screen. 2. Touch "Yes". 2. Touch "Yes". 160 - 2008 Toyota Land Cruiser | Navigation Manual - Page 427
the Hands−free system. It is useful when you leave your car with the hotel or you don't want others to see the data you registered. When you set or unlock the security, you have to input the security code. Be sure to change the default code when you use the security for the first - 2008 Toyota Land Cruiser | Navigation Manual - Page 428
the phone book data but also the memory points in the navigation system, etc. will be deleted. (See "D Initializing the security code" on page 164.) 3. Input the security code. Each time you touch A, an input digit is deleted. 4. Touch "Yes". 1. Touch "Phone Book Lock". 2. Touch "Change". 162 - 2008 Toyota Land Cruiser | Navigation Manual - Page 429
functions locked. D Display of the phone book screen and transferring, registering, editing, deleting the phone book data. D Display of speed dial screen, information screen. D Changing the security code. When you set this function, the speed dial screen is not displayed while driving. 1. Touch "ON - 2008 Toyota Land Cruiser | Navigation Manual - Page 430
OTHER FUNCTIONS - Set a Bluetoothr phone D Initializing the security code You can initialize the settings. D Selecting a Bluetoothr phone In case you register more than one Bluetoothr phone, you need to choose a favorite one. 1. Touch "Default". 1. Touch "Settings" to display the "Settings" - 2008 Toyota Land Cruiser | Navigation Manual - Page 431
Bluetoothr phone is trying to connect, this screen is displayed. Touch "Yes" or "No". Although you can register up to 6 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. 3. Touch "OK". When the result message is displayed, you can use the Bluetoothr phone. 165 - 2008 Toyota Land Cruiser | Navigation Manual - Page 432
on the screen. You can change it into a desired name. "Bluetooth* Device Address" ...The address peculiar to the system. You cannot change it. 2. Touch "Change". 1. Select the desired phone and touch "Information". *: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 3. When you complete - 2008 Toyota Land Cruiser | Navigation Manual - Page 433
it. "Passkey" ...The password when you register your cellular phone in the system. You can change it into the figure of 4−8 digits. "Bluetooth* Device Address" ...The address peculiar to the system. You can not change it. If you have registered two Bluetoothr phones with the same Device Name or - 2008 Toyota Land Cruiser | Navigation Manual - Page 434
3. Use the software keyboard to input the device name. You can input up to 20 characters. 2. Touch "Change" of "Device Name" or "Passkey". *: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 4. Input a Passkey with 4 − 8 digits. When you touch A, the input number is deleted. 5. When you - 2008 Toyota Land Cruiser | Navigation Manual - Page 435
. You can initialize the settings. D Deleting a Bluetoothr phone 1. Touch "Default". 1. Touch "Delete" of "Bluetooth* Telephone". 2. Touch "Yes". 2. Select the telephone you want to delete and touch "OK". 3. Touch "Yes". *: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 169 - 2008 Toyota Land Cruiser | Navigation Manual - Page 436
OTHER FUNCTIONS When you delete the telephone while another Bluetoothr phone is connecting, this message is displayed. D Displaying the information of the Bluetoothr phone you delete You can display the information of the Bluetoothr phone before you delete it and you can make sure whether the - 2008 Toyota Land Cruiser | Navigation Manual - Page 437
command system The speech command system enables you to operate the navigation system, audio system and air conditioning system by giving .) When you touch "Cancel", the previous screen returns. If the navigation system does not respond or the confirmation screen does not disappear, please push the - 2008 Toyota Land Cruiser | Navigation Manual - Page 438
you will hear "Home is not registered". " Microphone It is unnecessary to speak directly into the microphone when giving a command. 3. If the system recognized the command, the recognition result "Home" is displayed on the top of the screen with the screen message. (Displayed message and the touch - 2008 Toyota Land Cruiser | Navigation Manual - Page 439
the destination by "POI Name", this screen is displayed. This system has a function which displays the voice recognition help screen. You can see the command list and operating guide on it. (a) Command list 1. If the "Operating guide" screen is displayed, touch "Command list" on the upper side - 2008 Toyota Land Cruiser | Navigation Manual - Page 440
1. If the "Command list" screen is displayed, touch "Operating guide" on the upper side of the screen. The clock in this system can be corrected manually or by using signals from the GPS. Daylight Saving Time setting or your desired time setting is available. 5E5502T 2. Select the desired category - 2008 Toyota Land Cruiser | Navigation Manual - Page 441
or canceled. While daylight saving time is set, this switch is highlighted in green. Time Zone: You can select the time zone. Touching this switch changes to the time zone selection screen. Touch the switch of your desired area. The time zone for the area is set and the previous screen - 2008 Toyota Land Cruiser | Navigation Manual - Page 442
OTHER FUNCTIONS Screen adjustment The brightness or contrast of the screen can be adjusted depending on the brightness of your surroundings. You can also turn the display off. 1. To display the "Display" screen, push the "DISP" button. 2. Touch the desired button to adjust contrast and brightness - 2008 Toyota Land Cruiser | Navigation Manual - Page 443
the red color of the screen. "Color" "G": Strengthens the green color of the screen. "Tone" "+": Strengthens the tone of the screen. "Tone" "−": Weakens the tone of the screen. 2. After adjusting the screen, touch "OK". If your vehicle is equipped with the rear seat entertainment system, the rear - 2008 Toyota Land Cruiser | Navigation Manual - Page 444
" screen. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen automatically returns from the audio/air conditioner screen 20 seconds after the end of audio/ air conditioner screen operation. "OFF": The audio/air conditioner screen remains on. 2. Touch "Screen Setting". 178 - 2008 Toyota Land Cruiser | Navigation Manual - Page 445
OTHER FUNCTIONS (b) Switch color You can select the color of the touch− screen buttons. (c) Rear system lock (with rear seat entertainment system) If the vehicle is equipped with the rear seat entertainment system, the rear seat entertainment system can be locked to prevent rear passengers from - 2008 Toyota Land Cruiser | Navigation Manual - Page 446
to avoid D Previous points D Route trace D User selection settings D Phone book data D Dialed numbers and received calls D Speed dial D Bluetooth phone data D Security code This function is available only when the vehicle is not moving. 1. Touch "Delete personal data". The "Delete personal data - 2008 Toyota Land Cruiser | Navigation Manual - Page 447
You can set a beep sound off. Selecting a language The language of the touch−screen buttons, pop−up messages and the voice guidance can be changed. 1. Push the "INFO" button. 1. Push the "INFO" button. 2. Touch "Beep Off". "Beep Off" is highlighted. To switch the beep sound on, touch "Beep Off - 2008 Toyota Land Cruiser | Navigation Manual - Page 448
çais" or "Español" to select a language. If a screen other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "OK". The language is changed and the screen returns to the map display. 182 - 2008 Toyota Land Cruiser | Navigation Manual - Page 449
AUDIO/VIDEO SYSTEM SECTION AUDIO/VIDEO SYSTEM Audio/video system 6 D Quick reference ...184 D Using your audio/video system ...185 Some basics ...Radio operation ...DVD changer operation ...D Audio/video remote controls ...185 191 203 233 D Audio/video system operating hints ...234 183 - 2008 Toyota Land Cruiser | Navigation Manual - Page 450
AUDIO/VIDEO SYSTEM Quick reference 1 2 3 Function button display screen Touch the button Push this button to insert the discs. For details, see page 203. "AUDIO CONTROL"/"TUNE·FILE" knob Push this knob to adjust the audio sounds. Turn this knob to move up or down the station band or file. For - 2008 Toyota Land Cruiser | Navigation Manual - Page 451
and 228. This section describes some of the basic features on Toyota audio/video systems. Some information may not pertain to your system. Your audio/video system works when the "ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode. NOTICE To prevent the battery from being discharged - 2008 Toyota Land Cruiser | Navigation Manual - Page 452
AUDIO/VIDEO SYSTEM CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user's authority to operate this device. D Laser products D Do not take this unit apart or attempt to make any changes - 2008 Toyota Land Cruiser | Navigation Manual - Page 453
set, DVD changer does not turn on. You can turn off each player by ejecting the cassette tape or disc. If the audio system was previously off, then the entire audio system will be turned off when you eject the cassette tape or disc. If another function was previously playing, it will come on - 2008 Toyota Land Cruiser | Navigation Manual - Page 454
and DVD changer operation are displayed on the function button display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected button is highlighted. D If the system does not respond to a touch of a touch−screen button, move your finger away from - 2008 Toyota Land Cruiser | Navigation Manual - Page 455
AUDIO/VIDEO SYSTEM D Tone and balance How good an audio program sounds to you is largely determined by the mix of Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of sounds while decreasing the volume of - 2008 Toyota Land Cruiser | Navigation Manual - Page 456
of "SURROUND" and touch "OK". The surround function will turn on. Automatic sound levelizer (ASL): When the audio sound becomes difficult to hear due to road noise, wind noise or other noises while driving, touch "ON". The system adjusts to the optimum volume and tone quality according to the noise - 2008 Toyota Land Cruiser | Navigation Manual - Page 457
Push these buttons to choose either an AM or FM station. "AM", "FM1" or "FM2" appears on the screen. If your vehicle is equipped with a satellite radio broadcast system, when you push the "AM·SAT" button, "AM", "SAT1", "SAT2", "SAT3" station appears on the display. For details about satellite radio - 2008 Toyota Land Cruiser | Navigation Manual - Page 458
AUDIO/VIDEO SYSTEM D Presetting a station Turn the knob clockwise to step up the station band or counterclockwise to step down. Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the - 2008 Toyota Land Cruiser | Navigation Manual - Page 459
on reception. Each time you push the button, the stations will be searched automatically one after another. To scan all the frequencies: Touch "SCAN" on "SCAN" button again. D RDS (Radio Data System) Your audio system is equipped with Radio Data Systems (RDS). RDS mode allows you to receive text - 2008 Toyota Land Cruiser | Navigation Manual - Page 460
AUDIO/VIDEO SYSTEM "TYPE A "" Each time you touch "TYPE A" or "TYPE "", the program type changes as follows: D ROCK D EASY LIS (Easy listening) D CLS/JAZZ (Classical music and Jazz) D R & B (Rhythm and Blues) D INFORM (Information) D RELIGION D MISC (Miscellaneous) D ALERT (Emergency message) " - 2008 Toyota Land Cruiser | Navigation Manual - Page 461
) If the system receives a radio text from an RDS station, "MSG" appears on the display. Touch "MSG", and a text message is displayed on the screen. This function is available only when the vehicle is not moving. When you touch "MSG OFF", the display returns. "TRAF" The tuner automatically seeks - 2008 Toyota Land Cruiser | Navigation Manual - Page 462
AUDIO/VIDEO SYSTEM - Radio operation (XMr Satellite Radio broadcast) To listen to a satellite radio broadcast in your vehicle, an additional a unique radio ID. You will need the radio ID when activating XMr service or when reporting a problem. If you select the "CH 000" using the "TUNE" knob, the - 2008 Toyota Land Cruiser | Navigation Manual - Page 463
AUDIO/VIDEO SYSTEM D Listening to satellite radio Push the "AM·SAT" button to choose either an AM station or an SAT channel. Besides "AM", "SAT1", "SAT2" or "SAT3" - 2008 Toyota Land Cruiser | Navigation Manual - Page 464
AUDIO/VIDEO SYSTEM D Channel category D Presetting a channel 1. Tune in the desired channel. Touch either appears on the touch−screen button. Each SAT mode can store up to 6 stations. To change the preset channel to a different one, follow the same procedure. The preset channel memory is cancelled - 2008 Toyota Land Cruiser | Navigation Manual - Page 465
AUDIO/VIDEO SYSTEM D Selecting a channel Tune in the desired channel using one of the following methods. Preset tuning: Touch the channel selector touch−screen button (1 - 6) for the channel - 2008 Toyota Land Cruiser | Navigation Manual - Page 466
AUDIO/VIDEO SYSTEM D Displaying the title and name When you touch "TEXT", the song/program title and the artist name/feature are displayed. Up to 10 alphanumeric . If there is no song/program title or artist name/feature associated with the channel at that time will appear on the display. 200 - 2008 Toyota Land Cruiser | Navigation Manual - Page 467
". If it does not change automatically, select another channel. If you want to listen to the premium channel, contact the XMr Satellite Radio. The XMr signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal. The unit is acquiring audio or program - 2008 Toyota Land Cruiser | Navigation Manual - Page 468
the user's right to operate the equipment. INFORMATION This XMr tuner supports "Audio Services" (Music and Talk) of only XMr Satellite Radio and "Text Information"* linked to the respective "Audio Services". *Text Information includes, Station Name, (Artist) Name, (Song) Title and Category - 2008 Toyota Land Cruiser | Navigation Manual - Page 469
/video system operating hints" on page 234. For safety reasons, you can enjoy DVD video discs, DVD audio discs and video CDs only when the vehicle is completely stopped with the "ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode and the parking brake applied. While you are driving - 2008 Toyota Land Cruiser | Navigation Manual - Page 470
AUDIO/VIDEO SYSTEM D Setting all the discs: 2. Insert only one disc while the DVD changer door is open. You can set a disc at the lowest empty disc number. After insertion, the set disc is automatically the slot start blinking. After the amber indicators change to green and stay on, the DVD changer - 2008 Toyota Land Cruiser | Navigation Manual - Page 471
AUDIO/VIDEO SYSTEM 3. Insert the next disc after the amber indicators change to green and stay on and the after pushing the "LOAD" button, the beep will sound and the operation will be canceled automatically. D Ejecting a single alone: NOTICE Do not insert one disc stacked on top of another - 2008 Toyota Land Cruiser | Navigation Manual - Page 472
be canceled automatically. When all Audio disc and MP3/WMA disc only - When play of one disc ends, the first track of the following disc starts. When play of the final disc ends, play of the first disc starts again. The changer will skip any empty disc trays. Vehicles with rear entertainment system - 2008 Toyota Land Cruiser | Navigation Manual - Page 473
the disc you want to play. The selected disc is automatically played. On the screen: Touch the desired disc number. The selected disc number is highlighted. The changer will start playing the selected disc from the first track. On the audio panel: Push the " " or " " button of "CH·DISC". When you - 2008 Toyota Land Cruiser | Navigation Manual - Page 474
AUDIO/VIDEO SYSTEM D Selecting a desired track Touch the desired track number. The you release the button, the changer will resume playing. Vehicles with rear entertainment system - While the DVD player is in operation, the chapter or track can be changed by pushing either side of the "SEEK·TRACK" - 2008 Toyota Land Cruiser | Navigation Manual - Page 475
AUDIO/VIDEO SYSTEM D Searching for a desired track or a disc Searching for a desired push the "SCAN" button once again. After all the audio discs are scanned in one pass, normal play resumes. D Other functions "RPT": Use it for automatic repeat of the track or disc you are currently listening to - 2008 Toyota Land Cruiser | Navigation Manual - Page 476
AUDIO/VIDEO SYSTEM "RAND": Use it for automatic and random selection. Playing the tracks on one disc in random order - While the disc is playing, touch "RAND" briefly. "RAND" appears on the screen. The system selects a track on the disc being listened to in random order. To cancel it, touch "RAND" - 2008 Toyota Land Cruiser | Navigation Manual - Page 477
AUDIO/VIDEO SYSTEM D Selecting a desired folder "FOLDERY": Touch "FOLDERY" to go to the next folder. "FOLDERB": Touch "FOLDERB" briefly to go to the previous folder. To jump up to the first folder, touch "FOLDERB" and hold it until the beep sounds. "FOLDER LIST": The desired folder can be selected - 2008 Toyota Land Cruiser | Navigation Manual - Page 478
AUDIO/VIDEO SYSTEM D Selecting a desired file "SEEK·TRACK" button: Use for direct access to a desired file. Push the " " or " " button of "SEEK·TRACK" and repeat it until the - 2008 Toyota Land Cruiser | Navigation Manual - Page 479
AUDIO/VIDEO SYSTEM "FILE": The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "FILE". The file list is displayed. Touch the of the file currently playing is displayed. This function is available only when the vehicle is not moving. 213 - 2008 Toyota Land Cruiser | Navigation Manual - Page 480
AUDIO/VIDEO SYSTEM D Searching for a desired file D Searching for a desired folder While the disc is playing, touch "SCAN" on the screen or push the "SCAN" button briefly. "SCAN" - 2008 Toyota Land Cruiser | Navigation Manual - Page 481
AUDIO/VIDEO SYSTEM D Other functions "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - While the file is playing, touch"RPT" briefly. "RPT" appears on the screen. When the file is finished, the changer will automatically go back to the - 2008 Toyota Land Cruiser | Navigation Manual - Page 482
screen appears when the video screen is first displayed after the "ENGINE START STOP" switch is in the ACCESSORY or IGNITION ON mode. Touch "OK or when you change to a different audio source. The louder sounds may have a significant impact on the human body or pose a driving hazard. Keep this - 2008 Toyota Land Cruiser | Navigation Manual - Page 483
Push the "AUDIO" button to display this screen. You can operate the touch− screen buttons and choose the number of the disc you want to play. The selected disc is automatically played. When you touch "WIDE", the screen mode can be changed. If you touch "PICTURE" when the vehicle is completely - 2008 Toyota Land Cruiser | Navigation Manual - Page 484
AUDIO/VIDEO SYSTEM D Description of DVD controls TOP PAGE OF DVD VIDEO CONTROLS "Menu" and "Top Menu": If you touch either button, the menu screen for DVD video appears. (For the operation, see the manual that come with the DVD video disc provided separately.) : The menu control key appears on the - 2008 Toyota Land Cruiser | Navigation Manual - Page 485
AUDIO/VIDEO SYSTEM TOP PAGE OF DVD AUDIO CONTROLS "Top Menu": If you touch this button, the menu screen for DVD audio appears. (For operation, refer to the DVD audio disc manual that is provided separately.) "AUDIO": The audio changing screen appears. (See page 223.) : The menu control key appears - 2008 Toyota Land Cruiser | Navigation Manual - Page 486
AUDIO/VIDEO SYSTEM D Searching by title D Searching by track DVD video only - wrong numbers, touch "Clear" to delete the numbers. When you touch screen returns. , the previous DVD audio only - Enter the track numbers on the searching track screen and touch "Enter". The changer starts playing - 2008 Toyota Land Cruiser | Navigation Manual - Page 487
AUDIO/VIDEO SYSTEM D Searching by group D Selecting the bonus group DVD audio only - Enter the group you touch screen returns. , the previous DVD audio only - Enter the bonus group number on the searching group screen and touch "Enter". The "Enter Key Code" screen will appear. To enter the - 2008 Toyota Land Cruiser | Navigation Manual - Page 488
AUDIO/VIDEO SYSTEM D Changing the still picture D Changing the subtitle language DVD audio only - Touch "Prev. Still" or "Next Still" on the screen to forward or reverse the still pictures. Each time you touch "Subtitle", the language is selected from the ones stored in the discs and changed. To - 2008 Toyota Land Cruiser | Navigation Manual - Page 489
AUDIO/VIDEO SYSTEM D Changing the audio language D Changing the audio format DVD video only - Each time you touch "AUDIO", the language is selected from the ones stored in the discs and changed. When you touch screen returns. , the previous DVD audio only - Each time you touch "AUDIO", another - 2008 Toyota Land Cruiser | Navigation Manual - Page 490
previous The initial setting can be changed. After you change the initial setting, touch "Enter". The previous picture will be displayed. When "Default" is touched, all menus are initialized. AUDIO LANGUAGE You can change the audio language. 1. Touch "Audio Language". 2. Touch the language you want - 2008 Toyota Land Cruiser | Navigation Manual - Page 491
AUDIO/VIDEO SYSTEM SUBTITLE LANGUAGE You can change the subtitle language. 1. Touch "Subtitle Language". 2. code, see page 226. To return to the "Setup Menu" screen, touch . DVD LANGUAGE You can change the language on the DVD video menu. 1. Touch "DVD Language". 2. Touch the language you want to - 2008 Toyota Land Cruiser | Navigation Manual - Page 492
AUDIO/VIDEO SYSTEM D Enter subtitle language code 0101 0102 0106 0113 0118 0119 0125 Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish If you touch "Other" on the "Select Audio Language" screen, "Select Subtitle Language" screen or "DVD Language" screen, you can select the - 2008 Toyota Land Cruiser | Navigation Manual - Page 493
AUDIO/VIDEO SYSTEM 0704 0712 0714 0721 0801 0809 0818 0821 0825 0901 0905 0911 0914 0919 0923 1009 1023 1101 1111 1112 1113 1114 1119 1121 1125 - 2008 Toyota Land Cruiser | Navigation Manual - Page 494
AUDIO/VIDEO SYSTEM 1914 1915 1917 1918 1919 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 2014 2015 a video CD Push the "AUDIO" button to display this screen. When you touch "WIDE", the screen mode can be changed. It you touch "PICTURE" when the vehicle is completely stopped and the parking - 2008 Toyota Land Cruiser | Navigation Manual - Page 495
AUDIO/VIDEO SYSTEM D track is searched and played. "Main/Sub": A multiplex transmission changing button. The mode changes from Main/Sub to Main, to Sub and back to Main or touch and hold it to play slowly. If you touch the part where touch−screen buttons are not located while you are watching video - 2008 Toyota Land Cruiser | Navigation Manual - Page 496
. For appropriate discs for this player, see "Audio/video system operating hints" on page 234. If "Region following causes are possible. D There is a trouble inside the system. Eject the disc. D The inside of the If the malfunction is not rectified: Take your vehicle to your dealer. If an MP3/WMA disc - 2008 Toyota Land Cruiser | Navigation Manual - Page 497
AUDIO/VIDEO SYSTEM (i) DVD player and DVD video disc information D DVD video discs This DVD player conforms to NTSC color TV formats. Region codes: Some DVD video discs have a region code indicating a country where you can use the DVD video disc on this DVD player. - 2008 Toyota Land Cruiser | Navigation Manual - Page 498
data assigned to the picture is changed depending on the picture format has also been adopted. Audio data is stored using by Macrovision Corporation and other rights owners. Use of this copyright protection engineering or disassembly is prohibited. "DTS" is a trademark of Digital Theater Systems, - 2008 Toyota Land Cruiser | Navigation Manual - Page 499
this again to find the next station. If you push either the " " or " " switch in seek mode, the seek mode will cancel. Some parts of the audio/video system can be adjusted with the switches on the steering wheel. Details of the specific switches, controls, and features are described below. 1 Volume - 2008 Toyota Land Cruiser | Navigation Manual - Page 500
Each time you push the "MODE" switch, the system changes the audio mode. The DVD player will be selectable if a rear seat entertainment system is installed in your vehicle. To turn the audio/video system on, push the "MODE" switch. To turn the audio/video system off, push and hold the "MODE" switch - 2008 Toyota Land Cruiser | Navigation Manual - Page 501
AUDIO/VIDEO SYSTEM cassette tape player and tapes: Clean the tape head and other parts regularly. D A dirty tape head or tape path can decrease high−quality cassettes: D Low−quality cassette tapes can cause many problems, including poor sound, inconsistent playing speed, and constant auto−reversing - 2008 Toyota Land Cruiser | Navigation Manual - Page 502
errors, use the appropriate file extensions. D The player can play only the first session using multi−session compatible CDs. D MP3 files are compatible with the ID3 Tag Ver. 1.0, Ver. 1.1, Ver. 2.2 (front audio system only), and Ver. 2.3 formats. The unit cannot display disc title, track title - 2008 Toyota Land Cruiser | Navigation Manual - Page 503
is possible to play up to 253 folders on one disc. D MP3/WMA player (front audio system)-It is possible to play up to 192 folders or 255 files on one disc. D The order changes depending on the PC and MP3/WMA encoding software you use. 001.mp3 002.wma Folder 1 003.mp3 - 2008 Toyota Land Cruiser | Navigation Manual - Page 504
AUDIO/VIDEO SYSTEM CD−R AND CD−RW DISCS D CD−R/CD−RW discs that have high temperature can keep your DVD changer and DVD player from working. On hot days, use air conditioning to cool the vehicle interior before you listen to a disc. D Bumpy roads or other vibrations may make your DVD changer - 2008 Toyota Land Cruiser | Navigation Manual - Page 505
AUDIO/VIDEO SYSTEM DVD changer Audio CDs DVD video discs " Special shaped discs DVD audio discs Video CDs D Use only discs marked as shown above. The following products may not be playable on your DVD changer. SACDs dts−CDs Copy− - 2008 Toyota Land Cruiser | Navigation Manual - Page 506
AUDIO/VIDEO SYSTEM " Labeled discs " Correct " Wrong D Handle discs carefully, especially NOTICE D Do not discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause damage to - 2008 Toyota Land Cruiser | Navigation Manual - Page 507
AUDIO/VIDEO SYSTEM To clean a disc: Wipe it with a soft, lint− free cloth that has been dampened with water. Wipe in a straight line from the center to the - 2008 Toyota Land Cruiser | Navigation Manual - Page 508
AUDIO/VIDEO SYSTEM m3u- Playlists created using "WINAMP" software have a playlist file extension (.m3u). MP3- MP3 is an audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on - 2008 Toyota Land Cruiser | Navigation Manual - Page 509
AIR CONDITIONING SECTION AIR CONDITIONING Air conditioning 7 D Automatic air conditioning controls ...244 243 - 2008 Toyota Land Cruiser | Navigation Manual - Page 510
AIR CONDITIONING Automatic air conditioning controls 1 2 3 4 5 6 Air flow control touch−screen buttons ...248 Rear air conditioning control touch−screen button ...250 "4ZONE" (Temperature setting mode change touch−screen button) ...247 Fan speed control touch−screen buttons ...249 "A/C" ...250 - 2008 Toyota Land Cruiser | Navigation Manual - Page 511
AIR CONDITIONING " Air flow selection Automatic air flow mode only 245 - 2008 Toyota Land Cruiser | Navigation Manual - Page 512
each indicator and display. When one of the manual control buttons is depressed while operating in automatic mode, the operation corresponding to the depressed button is set. Other conditions continue to be adjusted automatically. Push the "OFF" button to turn the air conditioning system off. 246 - 2008 Toyota Land Cruiser | Navigation Manual - Page 513
AIR CONDITIONING 2. Use the "TEMP " or "TEMP " button to set the desired vehicle interior temperature. The "TEMP " or "TEMP " selector button is used to set the desired interior temperature. The interior 's seat is changed in linked mode, the mode is changed automatically to independent mode. 247 - 2008 Toyota Land Cruiser | Navigation Manual - Page 514
is set. Other conditions continue to be adjusted automatically. If manual air flow selection is desired - Driver side setting air flow Passenger side setting air flow Mixed air flow The outlets from which air is delivered can be selected manually by touching the touch−screen button. The function - 2008 Toyota Land Cruiser | Navigation Manual - Page 515
the vehicle. For normal use, it is best to keep the air intake control button set to OUTSIDE AIR mode. If recirculated air is used during heating, the windows will fog up more easily. In the following cases, the RECIRCULATED mode may change to the OUTSIDE AIR mode automatically to prevent interior - 2008 Toyota Land Cruiser | Navigation Manual - Page 516
). If the system is used for ventilation, heating in dry weather or removing frost or exterior fog on the windshield, turn the air conditioning off once it is no longer required. This will improve fuel economy. The air conditioning can be used for year− round automatic temperature control including - 2008 Toyota Land Cruiser | Navigation Manual - Page 517
interior fog on the windshield - Push the windshield air flow air flow control to obtain a maximum air flow. 4. Leave the air conditioning on−off control off. When the windshield air flow button is pushed while operating in automatic mode, the air conditioning is set to operate and the OUTSIDE AIR - 2008 Toyota Land Cruiser | Navigation Manual - Page 518
CONDITIONING (d) Micro dust and pollen filter Outside air mode switches to recirculated air mode. Pollen is removed from air and the air flows to the upper part of the body. Usually the system will turn off automatically approximately 3 minutes later. To stop the operation, press the button again - 2008 Toyota Land Cruiser | Navigation Manual - Page 519
. (f) Checking and replacing the air conditioning filter The air conditioning filter information label is placed in the glove box as shown and indicates that a filter has been installed. The air conditioning filter prevents dust from entering the vehicle through the air conditioning vent. 253 - 2008 Toyota Land Cruiser | Navigation Manual - Page 520
, please refer to the "Warranty and Services Guide/Owner's Manual Supplement/ Scheduled Maintenance".) Before replacing the air conditioning filter, turn the "ENGINE START STOP" switch IGNITION ON mode and switch to recirculated air mode, then turn the "ENGINE START STOP" switch off. 1. Open the - 2008 Toyota Land Cruiser | Navigation Manual - Page 521
dirty, it should be replaced. When installing the filter in the filter case, keep the arrow pointing up. INFORMATION The air conditioning filter should be installed properly in position. The use of air conditioning with the filter removed may cause deteriorated dustproof performance and then affect - 2008 Toyota Land Cruiser | Navigation Manual - Page 522
AIR CONDITIONING 256 - 2008 Toyota Land Cruiser | Navigation Manual - Page 523
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM Rear view monitor system 8 D Rear view monitor system ...258 257 - 2008 Toyota Land Cruiser | Navigation Manual - Page 524
, be sure to check behind and all around the vehicle visually and with mirrors before proceeding. Do not use the system when the backdoor is not completely closed. If the back of the vehicle is hit, the position and mounting angle of the camera may change. Be sure to have the camera's position and - 2008 Toyota Land Cruiser | Navigation Manual - Page 525
around the vehicle visually and with mirror before proceeding. When replacing the tires, please consult your Toyota dealer. If you replace the tires, the area displayed on the screen may change. D Area displayed on screen Image is displayed approximately level on screen. " Corners of bumper The - 2008 Toyota Land Cruiser | Navigation Manual - Page 526
The area displayed on the screen may vary according to vehicle orientation or road conditions. The rear view monitor system camera is located on the back door as shown in the illustration. The camera uses a special lens. The distance of the image that appears on the screen differs from the actual - 2008 Toyota Land Cruiser | Navigation Manual - Page 527
VIEW MONITOR SYSTEM If a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera, the smear effect∗ peculiar to the camera may occur. ∗: Smear effect-A phenomenon that occurs when a bright light (for example, sunlight reflected off the vehicle body) is picked - 2008 Toyota Land Cruiser | Navigation Manual - Page 528
REAR VIEW MONITOR SYSTEM 262 - 2008 Toyota Land Cruiser | Navigation Manual - Page 529
APPENDIX SECTION APPENDIX Appendix 9 D Limitations of the navigation system ...264 D Map database information and updates ...266 263 - 2008 Toyota Land Cruiser | Navigation Manual - Page 530
. The GPS satellites may not send signals due to repairs or improvements being made to them. Even when the navigation system is receiving clear GPS signals, the vehicle position may not be shown accurately or inappropriate route guidance may occur in some cases. NOTICE The installation of window - 2008 Toyota Land Cruiser | Navigation Manual - Page 531
your vehicle cannot receive GPS signals, you can correct the current position manually. For driving. In auto reroute, a detour route may be shown. D After auto reroute, the route may not be changed. D An unnecessary U−turn may be shown or announced. D A location may have multiple names and the system - 2008 Toyota Land Cruiser | Navigation Manual - Page 532
- After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 111.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing tires that are larger or smaller than the originally equipped - 2008 Toyota Land Cruiser | Navigation Manual - Page 533
The Data for areas of Canada includes information taken with permission from Canadian system for the solely personal, non− commercial purposes for which you were licensed, and not for service reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer - 2008 Toyota Land Cruiser | Navigation Manual - Page 534
systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle due to the passage of time, changing circumstances, sources used and the nature , WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF [CLIENT] OR ITS LICENSORS - 2008 Toyota Land Cruiser | Navigation Manual - Page 535
Control. You agree not to export from anywhere any part of the Data provided to you or any direct conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State - 2008 Toyota Land Cruiser | Navigation Manual - Page 536
part of the DATABASE without the prior written consent of TANA and its licensors. LIMITATIONS ON USE The DATABASE is restricted for use in the specific system reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system for - 2008 Toyota Land Cruiser | Navigation Manual - Page 537
may contain inaccurate or incomplete information due to the passage of time, changing circumstances, and due to the nature of the sources used. The construction work; road or lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic - 2008 Toyota Land Cruiser | Navigation Manual - Page 538
the DATABASE held by you shall immediately be destroyed. If any court of competent jurisdiction considers this clause void and unenforceable, in whole or in part, for any reason, this Agreement shall be considered terminated and null and void, in its entirety, and any and all copies of the DATABASE - 2008 Toyota Land Cruiser | Navigation Manual - Page 539
SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part engineer any portion of the POI Data. 3. TRANSFER You may not transfer the POI Data to third parties, except together with the system non−commercial purposes, and not for service bureau, time−sharing or other similar - 2008 Toyota Land Cruiser | Navigation Manual - Page 540
ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF marks of their respective owners. The use of straight line from the current vehicle position to the destination area change. In some places, construction on roads may be in progress. For that reason, information on some areas in this system - 2008 Toyota Land Cruiser | Navigation Manual - Page 541
APPENDIX D To confirm the database version and disc coverage area The map database is normally updated once a year. Contact your dealer for updating a map database. 1. Push the "MENU" button. 2. Touch "Map DVD". 275 - 2008 Toyota Land Cruiser | Navigation Manual - Page 542
is a more recent update available. To eject the map disc, open the glove box and touch the " DVD" switch. The glove box must be opened first, or the disc will come into contact with the glove box door and be reinserted. 276 - 2008 Toyota Land Cruiser | Navigation Manual - Page 543
your purchase of the Navigation System. Please read this manual carefully to ensure proper use. Keep this manual in your vehicle at all times. The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global - 2008 Toyota Land Cruiser | Navigation Manual - Page 544
Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle condition or other circumstances. For more information on the - 2008 Toyota Land Cruiser | Navigation Manual - Page 545
. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire Navigation System Owner's Manual to - 2008 Toyota Land Cruiser | Navigation Manual - Page 546
determine the current vehicle position correctly, there is a possibility of incorrect, late, or non−voice guidance. The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before - 2008 Toyota Land Cruiser | Navigation Manual - Page 547
Quick guide - - Overview buttons and guidance screen No. 1 2 3 Name North−up or heading−up symbol Scale indicator Zoom out touch−screen button "Mark" "Route" "Map View" Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map orientation. This - 2008 Toyota Land Cruiser | Navigation Manual - Page 548
information. Page 104 8 34 9 35 10 Touch this button to change the screen mode. 32 11 Distance and time Displays the distance, the vehicle is receiving signals from the GPS, this mark is displayed. The microphone is shown by pushing the speech command switch. The speech command system can - 2008 Toyota Land Cruiser | Navigation Manual - Page 549
- Registering home 1 Push "MENU" button. 2 Touch "My Places". 3 Touch "Register" of the home. 4 There are 12 different methods to search your home. See "Destination search" on page 39. 7 - 2008 Toyota Land Cruiser | Navigation Manual - Page 550
5 Touch "Enter". The "Memory Point" screen is displayed. 6 Touch "OK". Registration of home is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 91.) 8 - 2008 Toyota Land Cruiser | Navigation Manual - Page 551
- Registering preset memory point (Quick access) 1 Push "MENU" button. 2 Touch "My Places". 3 Touch "Register" of the memory points. 4 There are 13 different methods to search preset destinations. See "Destination search" on page 39. 9 - 2008 Toyota Land Cruiser | Navigation Manual - Page 552
is displayed. 6 Touch "Quick Access". 7 Touch one of preset buttons 1 to 5. 8 Touch "OK". Registration of preset memory point is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 91.) The registered points can be used on - 2008 Toyota Land Cruiser | Navigation Manual - Page 553
13 different methods to search destinations. See "Destination search" on page 39. 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 57 - 2008 Toyota Land Cruiser | Navigation Manual - Page 554
has been registered. (To register "Home", see " - Registering home" on page 96.) 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 57