2009 Toyota Corolla Owners Manual - Page 44

1-2. Opening, closing and locking the doors and trunk n Setting and canceling the functions To switch between set and canceled, follow the procedure below: STEP 1 Vehicles with smart key system: Close all the doors and switch the "ENGINE START STOP" switch to IGNITION ON mode. (Perform the step 2 within 10 seconds.) Vehicles without smart key system: Close all the doors and switch the engine switch to the "ON" position. (Perform step 2 within 10 seconds.) Shift the shift lever to P or N, and press and hold the driver's door lock switch ( or ) for approximately 5 seconds and then release. The shift lever and switch positions corresponding to the desired function to be set or canceled are shown as follows. Function Shift lever position Switch position 1 Before driving STEP 2 Shift position linked door locking function*1 Shift position linked door unlocking function*1 Speed linked door locking function*2 Driver's door linked door unlocking function P N *1: Vehicles with an automatic transmission only *2: Vehicles with smart key system When the setting or canceling operation is complete, all doors are locked and then unlocked. 41