2011 Toyota Land Cruiser Navigation Manual - Page 252

AIR CONDITIONING SETTING OPERATION - manual control When one of the manual control touch− screen buttons is depressed while operating in automatic mode, the operation corresponding to the depressed button is set. Other conditions continue to be adjusted automatically. If manual air flow selection is desired - The outlets from which air is delivered can be selected manually by touching the touch−screen button. The function of each mode is as follows: 1 Panel - Air flows mainly from the instrument panel vents and rear vents. 2 Bi−level - Air flows from both the floor vents, instrument panel vents and rear vents. When you set the temperature selector setting at about the middle in automatic operation, warm air flows out of the floor vents and relatively low− temperature air flows out of the instrument panel vents and rear vents. 3 Floor - Air flows mainly from the floor vents and rear vents. 4 Floor/windshield - Air flows mainly from the floor vents, windshield vents and rear vents. The selected mode is highlighted. The air flow shown on the display indicates the following. " Air flows to the upper body (Panel) Depending on the rear air conditioning setting Automatic air flow mode only 254