2011 Toyota Sequoia Owners Manual - Page 254

2-4. Using other driving systems n Flicker effect When the camera is used under fluorescent lights, sodium lights, mercury lights, etc., the lights and the illuminated areas may appear to flicker. CAUTION n When using the rear view monitor system Observe the following precautions to avoid an accident that could result in death or serious injuries. l Never depend solely on the rear view monitor system when reversing. When driving 2 l Always check visually and with the mirrors to confirm your intended path is clear. l Always check the vehicle surrounding area, because the guide lines are estimates of distance and location. l The guide lines are assistant lines and do not change even if the steering wheel is turned. l Depicted distances between objects and flat surfaces differ from actual distances. l Do not use the system if back door is open. n Conditions which may affect the rear view monitor system l If the back of the vehicle has been hit, the camera's position and mounting angle may have changed. Have the vehicle inspected by your Toyota dealer. l Rapid temperature changes, such as when hot water is poured on the vehicle in cold weather, may cause the system to function abnormally. l If the camera lens is dirty, it cannot transmit a clear image. Rinse with water and wipe with a soft cloth. If extremely dirty, wash with a mild cleanser and rinse. l The displayed image may be darker and moving images may be slightly distorted when the system is cold. n Caution while driving in reverse Do not change modes while the vehicle is moving. 221