2011 Toyota Sequoia Owners Manual - Page 529

4-1. Maintenance and care n Bumpers and side moldings Do not scrub with abrasive cleaners. CAUTION n Caution about the exhaust pipe Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns. NOTICE n To prevent paint deterioration and corrosion on the body and components (aluminum wheels etc.) l Wash the vehicle immediately in the following cases: After driving near the sea coast After driving on salted roads If you see coal tar or tree sap on the paint surface If you see dead insects, insect droppings or bird droppings on the paint After driving in an area contaminated with soot, oily smoke, mine dust, iron powder or chemical substances • If the vehicle becomes heavily soiled in dust or mud • If liquids such as benzene and gasoline are spilled on the paint surface l If the paint is chipped or scratched, have it repaired immediately. l To prevent the wheels from corroding, remove any dirt and store in a place with low humidity when storing the wheels. n Cleaning the exterior lights l Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surfaces of the lights. l Do not apply wax on the surfaces of the lights. Wax may cause damage to the lenses 4 Maintenance and care 499