2011 Toyota Sequoia Owners Manual - Page 563

4-3. Do-it-yourself maintenance 3 Snow tires For driving on snow-covered roads or icy roads, we recommend using snow tires. If you need snow tires, select tires of the same size, construction and load capacity as the originally installed tires. Since your vehicle has radial tires as original equipment, make sure your snow tires also have radial construction. Do not install studded tires without first checking local regulations for possible restriction. Snow tires should be installed on all wheels. (→P. 253) n Initializing the tire pressure warning system Initialize the tires with the tire inflation pressure adjusted to the specified level. n If you push the tire pressure warning reset switch accidentally If initialization is performed, adjust the tire inflation pressure to the specified level and initialize the tire pressure warning system again. n When the initialization of the tire pressure warning system has failed Initialization can be completed in several minutes. However, in the following cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. l When operating the tire pressure warning reset switch, the tire pres4 Maintenance and care sure warning light does not flash 3 times. l After carrying out the initialization procedure, the tire pressure warn- ing light blinks for 1 minute and then stays on after driving for about 20 minutes. n Routine tire inflation pressure checks The tire pressure warning system does not replace routine tire inflation pressure checks. Make sure to check tire inflation pressure as part of your routine of daily vehicle checks. 533