2011 Toyota Sequoia Owners Manual - Page 570

4 -3 . Do-it -yourse lf m a int e na nc e Whe e ls If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause loss of handling control. n Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width, and inset*. Replacement wheels are available at your Toyota dealer. *: Conventionally referred to as "offset". Toyota does not recommend using: l Wheels of different sizes or types l Used wheels l Bent wheels that have been straightened n Wheel precautions l Use only Toyota wheel nuts and wrench designed for use with your aluminum wheels. l When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 100 miles (160 km). l Be careful not to damage the aluminum wheels when using tire chains. l Use only Toyota genuine balance weights or equivalent and a plastic or rubber hammer when balancing your wheels. 540