2011 Toyota Sequoia Owners Manual - Page 98

1-3. Adjustable components (seats, mirrors, steering wheel) Linking driving position memory with door unlock operation Memorized driving positions can be recalled when you unlock the driver's door using the wireless remote control and open the driver's door. n Setting the linked door unlock operation Before driving 1 Set the driving positions into the memory system using the "1" or "2" buttons. (→P. 64) Turn the engine switch off then, close the driver's door. Push the "1" or "2" button and the button on the wireless remote control at the same time for about 1 second until you hear a beep. Open one of the doors. If a door is not opened within 60 seconds after is pressed, the doors will be locked again and the alarm will automatically be set. In case the alarm is triggered, immediately stop the alarm. (→P. 106) n Canceling the linked door unlock operation Close the driver's door with the engine switch turned off. Push the SET button and the button on the wireless remote control at the same time for about 1 second until you hear 2 beeps. 65