2012 Toyota RAV4 Navigation Manual
2012 Toyota RAV4 Manual
2012 Toyota RAV4 manual content summary:
- 2012 Toyota RAV4 | Navigation Manual - Page 1
guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in when approaching an intersection. These voice instructions will help you keep your eyes on the road and are timed to provide - 2012 Toyota RAV4 | Navigation Manual - Page 2
1. BASIC INFORMATION BEFORE OPERATION IMPORTANT INFORMATION ABOUT THIS MANUAL For safety reasons, this manual indicates items requiring particular attention with the following marks. CAUTION ● This is a warning against anything which may cause injury to people if the warning is - 2012 Toyota RAV4 | Navigation Manual - Page 3
1. BASIC INFORMATION BEFORE OPERATION HOW TO READ THIS MANUAL 1. DESTINATION SEARCH 2. STARTING ROUTE GUIDANCE When "Map" is touched on the "Confirm Destination" screen, the map screen will be displayed. The map location of the selected destination can be set as a destination. z If a destination - 2012 Toyota RAV4 | Navigation Manual - Page 4
instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver - 2012 Toyota RAV4 | Navigation Manual - Page 5
control screen. Touch to display the "Apps" screen. Touch to display the audio control screen. Page 182 196 255 176 122 26, 236, 239, 242, 244, 247 24, 35, 46, 52, 92, 107, 114, 144, 164, 220, 250 "Phone" Touch to display the hands-free operation screen. Touch to display the "Information - 2012 Toyota RAV4 | Navigation Manual - Page 6
Name/Icon Function Touch to view and set "Energy Monitor", "Charge Summary", "Charging & Pre-Climate Setup" and "Range Map" settings. For details, refer to the "Owner's Manual". Press to display the "Main Menu" screen. Press and hold to turn off the screen and audio system. Page "EV" ⎯ 1 14, 16 - 2012 Toyota RAV4 | Navigation Manual - Page 7
the map scale. Touch to obtain a broader view. Some of the buttons on the screen will not be displayed. They are displayed again by touching "On ". Touch to register the current position or the cursor position as an address book entry. Touch to change the route. 44 " Off" 111 "Mark" "Route - 2012 Toyota RAV4 | Navigation Manual - Page 8
to display the "Map Mode" screen. Displays the distance, estimated travel and arrival time to the destination. This mark is displayed when XM information is received. Mode" Distance and time to destination XM indicator "GPS" mark (Global Positioning System) 44 41 QUICK GUIDE 80 246, 248 118 13 - 2012 Toyota RAV4 | Navigation Manual - Page 9
1. NAVIGATION OPERATION 3. REGISTERING HOME 1 Press the "HOME" button. 4 Touch "Yes". 5 2 Touch "Dest". There are 4 different methods to search your home. (See "DESTINATION SEARCH" on page 56.) 3 Touch "Go Home". 6 Touch "Enter". If a home address has not been registered, it can be - 2012 Toyota RAV4 | Navigation Manual - Page 10
1. NAVIGATION OPERATION 7 Touch "OK". 1 QUICK GUIDE Registration of home is complete. Home can also be registered by touching "Navigation" on the "Setup" screen. (See "REGISTERING HOME" on page 93.) The name, location, phone number and icon can be changed. (See "EDITING HOME" on page 94.) The - 2012 Toyota RAV4 | Navigation Manual - Page 11
1. NAVIGATION OPERATION 4. REGISTERING PRESET DESTINATIONS 1 Press the "HOME" button. 4 Touch "Yes". 5 2 Touch "Dest". There are 4 different methods to search preset destinations. (See "DESTINATION SEARCH" on page 56.) 3 Touch one of the preset destination buttons. 6 Touch "Enter". A - 2012 Toyota RAV4 | Navigation Manual - Page 12
Touch "OK". 1 QUICK GUIDE Registration of preset destinations is complete. Preset destinations can also be registered by touching "Navigation" on the "Setup" screen. (See "REGISTERING PRESET DESTINATIONS" on page 95.) The name, location, phone number and icon can be changed. (See "EDITING PRESET - 2012 Toyota RAV4 | Navigation Manual - Page 13
OPERATION 5. OPERATION FLOW: GUIDING THE ROUTE 1 Press the "HOME" button. Page 2 2 Touch "Dest". The driving range available on the current amount of charge remaining in the traction battery can be confirmed on the "Range Map" screen. (For details, refer to the "Owner's Manual") 4 Touch "Go to - 2012 Toyota RAV4 | Navigation Manual - Page 14
Press the "HOME" button. 4 Touch "OK", and start driving. 1 QUICK GUIDE 2 Touch "Dest". Routes other than the one recommended can address is set as the destination. The navigation system performs a search for the route. The driving range available on the current amount of charge remaining in - 2012 Toyota RAV4 | Navigation Manual - Page 15
FUNCTION INDEX 1. NAVIGATION SYSTEM FUNCTION INDEX Map Displaying maps Viewing the map screen Displaying the current position Viewing the current position vicinity map Changing the scale Changing the map orientation Displaying Points of Interest Displaying the estimated travel/arrival time to the - 2012 Toyota RAV4 | Navigation Manual - Page 16
84 QUICK GUIDE 1 Useful functions Address book Registering address book entries Marking icons on the map Information Displaying vehicle maintenance Hands-free system (for cellular phone) Initiating Bluetooth® Making a call on a Bluetooth® phone Receiving a call on the Bluetooth phone Voice command - 2012 Toyota RAV4 | Navigation Manual - Page 17
book entries, see "REGISTERING ADDRESS BOOK ENTRIES" on page 98.) Touch to select one of the 4 categories of emergency service points that have already been stored in the system's database. & Touch to enter the names of two intersecting streets or a freeway (interstate) entrance or exit. This is - 2012 Toyota RAV4 | Navigation Manual - Page 18
. If a preset destination point has not been registered, a message will be displayed asking if it is desirable to set a destination to the each time. If a home address has not been registered, a message confirming if it is desirable to set a home will be displayed, and the setting screen will appear - 2012 Toyota RAV4 | Navigation Manual - Page 19
screen can be set. Press the "HOME" button and touch to display the "Setup" screen. No. Name "General" Function Touch to change the selected language, operation sound settings, automatic screen change, etc. Touch to set the voice guidance settings. Touch to set home, preset destinations, address - 2012 Toyota RAV4 | Navigation Manual - Page 20
" "Audio" "Bluetooth*" "Phone" Function Touch to set XM Sports and XM Stocks. Touch to set iPod and HD Radio™ channel. Touch to set Bluetooth® phones and Bluetooth® audio devices. Touch to set the phone sound, phone book, message settings, etc. Page 250 220 1 164 QUICK GUIDE 144 *: Bluetooth is - 2012 Toyota RAV4 | Navigation Manual - Page 21
3. QUICK REFERENCE 3. "Information" SCREEN This screen can be used to display the XM satellite system, traffic incidents and map data. Press the "HOME" button and touch "Info" to display the "Information" screen. No. Name "Traffic Incidents" "XM Sports" "XM Stocks" " - 2012 Toyota RAV4 | Navigation Manual - Page 22
are performed by touching the navigation system screen directly with your finger. Operation method Outline Main use Page 1 Touch Quickly touch and release once. Changing and selecting various settings. ⎯ QUICK GUIDE Double tap* Quickly touch and release twice. Changing the map scale. 44 Drag - 2012 Toyota RAV4 | Navigation Manual - Page 23
3. QUICK REFERENCE 28 - 2012 Toyota RAV4 | Navigation Manual - Page 24
1. BASIC INFORMATION BEFORE OPERATION 1. INITIAL SCREEN 1 When the "POWER" switch is in ACCESSORY or ON mode, the initial screen will be displayed and the system will begin operating. MAINTENANCE INFORMATION This system reminds users when to replace certain parts or components and shows dealer - 2012 Toyota RAV4 | Navigation Manual - Page 25
BASIC INFORMATION BEFORE OPERATION 2. TOUCH SCREEN OPERATION This system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual 2 or more fingers, incorrect operation may occur. ● If the system does not respond to touching a screen button, move your finger - 2012 Toyota RAV4 | Navigation Manual - Page 26
BASIC INFORMATION BEFORE OPERATION 3. INPUTTING LETTERS AND NUMBERS/LIST SCREEN OPERATION When searching for an address or name, or entering data, letters and numbers can be input via the screen. Keyboard layout can be changed is incomplete. The list will be displayed automatically if the maximum number of - 2012 Toyota RAV4 | Navigation Manual - Page 27
of the screen. If the number of matching items is more than 999, the system displays on the screen. If the screen is flicked in an upward direction, a flicked in a downward direction, a previous page is displayed. 2 BASIC FUNCTION LIST SCREEN TOUCH OPERATION When a list is displayed, use the - 2012 Toyota RAV4 | Navigation Manual - Page 28
1. BASIC INFORMATION BEFORE OPERATION SORTING The order of a list displayed on the screen can be rearranged. 1 Touch "Sort". 2 Touch the desired sorting criteria. Screen button "Distance" Function Touch to sort in order of distance from the current position. Touch to sort in order of date. - 2012 Toyota RAV4 | Navigation Manual - Page 29
can also be turned off, and/or changed to either day or night mode. Adjusting the screen display SCREEN SETTINGS ADJUSTMENT ADJUSTING SCREEN DISPLAY AND CAMERA SETTINGS "Camera": Touch to adjust the image the camera displays. 2 BASIC FUNCTION Adjusting the image the camera displays 1 Press - 2012 Toyota RAV4 | Navigation Manual - Page 30
BASIC INFORMATION BEFORE OPERATION CONTRAST AND BRIGHTNESS ADJUSTMENT The contrast and brightness of the screen can be adjusted according to the brightness of your surroundings. The display can also be turned off. CHANGING is memorized even with the EV system turned off. "Brightness" "+" " - 2012 Toyota RAV4 | Navigation Manual - Page 31
from the current position to shown ( ). ). Distance will also be ● While driving, the current position mark is fixed on the screen and the map moves. ● The current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not - 2012 Toyota RAV4 | Navigation Manual - Page 32
1. BASIC INFORMATION BEFORE OPERATION MAP SCREEN FLICK OPERATION In addition to normal amount that the screen scrolls changes according to the speed of the flick. INFORMATION Touch "Enter ". ● Map screen scroll operations restricted when driving. are The screen changes and displays the map - 2012 Toyota RAV4 | Navigation Manual - Page 33
BOOK ENTRY Address book entry registration enables easy access to a specific point. TO SEE INFORMATION ABOUT THE ICON WHERE THE CURSOR IS SET 1 Touch "Mark". 2 BASIC FUNCTION To display information about an icon, set the cursor on it. - 2012 Toyota RAV4 | Navigation Manual - Page 34
1. BASIC INFORMATION BEFORE OPERATION If "Enter " is touched, the cursor position will be set as a destination. If a destination has already been set, "Go Directly" and "Add to Route" will be displayed. "Go Directly": Touch to delete the exist- If "Enter " is touched, the cursor position will be - 2012 Toyota RAV4 | Navigation Manual - Page 35
1. BASIC INFORMATION BEFORE OPERATION If is touched, the registered phone number can be called. SWITCHING THE SCREENS Any of the screen configurations can be selected. - 2012 Toyota RAV4 | Navigation Manual - Page 36
1. BASIC INFORMATION BEFORE OPERATION Screen button "Energy Monitor" Function Touch to display the energy monitor screen. (For details, refer to the "Owner's manual") Touch to display the following 4 screen configurations: "Dual map", "Compass", "Turn-by-Turn Arrow" and "Freeway Exit List". Touch - 2012 Toyota RAV4 | Navigation Manual - Page 37
1. BASIC INFORMATION BEFORE OPERATION - 2012 Toyota RAV4 | Navigation Manual - Page 38
the scale of the map screen. The scale of the map screen can be changed by touching the scale bar directly. This function is not available while driving. INFORMATION The map scale changes as follows after each double tap: When the displayed area is more than 0.25 miles • 0.5 miles→ 0.25 miles - 2012 Toyota RAV4 | Navigation Manual - Page 39
changed from north-up to heading-up by touching the orientation symbol at the top left of the screen. STANDARD MAP ICONS Icon Island Name 1 Touch or . Park 2 Industry BASIC of vehicle travel, north is always up. : Heading-up symbol The direction of vehicle travel is always up. Both the north-up - 2012 Toyota RAV4 | Navigation Manual - Page 40
functions can be performed: No. Function Touch to change the time zone and select "On" or "Off" for daylight saving time. (See "CLOCK SETTINGS" on page 47.) Touch to change the language. (See "SELECTING A LANGUAGE" on page 49.) Touch to change the distance unit. (See "UNIT OF MEASUREMENT" on - 2012 Toyota RAV4 | Navigation Manual - Page 41
program versions. For details, contact your Toyota dealer. Touch to update gracenote database versions. For details, contact your Toyota dealer. CLOCK SETTINGS Used for changing time zones and the on/off settings of daylight saving time. The time set on the navigation system is displayed on the - 2012 Toyota RAV4 | Navigation Manual - Page 42
2. SETUP 6 Touch "Save". INFORMATION 6 Touch the desired time zone. ● If settings are performed while the "POWER" switch is in ACCESSORY mode, the set time will be shown when the switch is turned to ON mode. - 2012 Toyota RAV4 | Navigation Manual - Page 43
". 2 BASIC FUNCTION 5 Touch the desired screen button. 5 Touch "English" (mile) or "Metric" (km). 6 7 Touch "Yes". The previous screen will be displayed. The previous screen will be displayed. Touch "Save". 6 Touch "Save". This function is available only in English or Spanish. To change - 2012 Toyota RAV4 | Navigation Manual - Page 44
2. SETUP SELECTING A KEYBOARD LAYOUT Keyboard layout can be changed. - 2012 Toyota RAV4 | Navigation Manual - Page 45
● This function is not available while driving. Touch "General" on the "Setup" screen. Touch "Delete Personal Data". 2 BASIC FUNCTION 5 Touch "Delete". ® phone data • Bluetooth • Phone sound settings • Phone display settings • Message settings • Audio setting ® audio setting • Bluetooth 51 - 2012 Toyota RAV4 | Navigation Manual - Page 46
2. SETUP 2. VOICE SETTINGS Voice guidance etc. can be set. 1 Press the "HOME" set to "On" or "Off". This setting can also be changed on the "Shortcut Menu" screen. (See page 224.) When "On" is selected, the audio system can be operated using voice commands. When using the traffic information - 2012 Toyota RAV4 | Navigation Manual - Page 47
be received via voice guidance while being guided to the desired destination. To reset all setup items, touch "Default". 1 2 switched off. Touch "Voice" on the "Setup" screen. Touch "On" of "Traffic Incident Warning". BASIC FUNCTION 1 2 3 4 Press the "HOME will not operate. 5 Touch "Save". 53 - 2012 Toyota RAV4 | Navigation Manual - Page 48
AREA The selected state (province) can be changed to set a destination from a different state Change State/Province" to display a list of the states/provinces/ territories of the United States and Canada screen button may be slow. ● The driving range available on the current amount of charge remaining - 2012 Toyota RAV4 | Navigation Manual - Page 49
destination point is set as the destination. The navigation system performs a search for the route. (See "STARTING driving. ● If a preset destination point has not been registered, a message confirming if it is desirable to set a preset destination will be displayed, and the setting screen will - 2012 Toyota RAV4 | Navigation Manual - Page 50
1. DESTINATION SEARCH DESTINATION SEARCH BY "Address" There are 2 methods to search a destination by address: (a)Search by city (b)Search by street address 5 Input a city name. 1 2 3 4 Press the "HOME" button. Touch "Dest" on the "Main Menu" screen. Touch "Address" on the "Destination" screen. - 2012 Toyota RAV4 | Navigation Manual - Page 51
" on page 71.) INFORMATION ● If the navigation system has never been used, this function will not be available. 9 Input a house number. SEARCH BY STREET ADDRESS 1 2 3 If the same address exists in more than one city, the current screen changes to the address list screen. Press the "HOME - 2012 Toyota RAV4 | Navigation Manual - Page 52
be searched using only the body part of its name. ● For example Confirm Destination" screen, the navigation system performs a search for the route. name to be input or selected will be displayed. DESTINATION SEARCH BY by name (b)Search by category (c)Search by phone # 8 Input a city name. 1 2 - 2012 Toyota RAV4 | Navigation Manual - Page 53
on page 62.) The desired Point of Interest can be displayed on the map screen. (See "DISPLAY POI ICONS" on page 87.) INFORMATION NAVIGATION SYSTEM 6 Touch the screen button of the desired destination. ● To search for a facility name using multiple search words, put a space between each word. 61 - 2012 Toyota RAV4 | Navigation Manual - Page 54
1. DESTINATION SEARCH - 2012 Toyota RAV4 | Navigation Manual - Page 55
1. DESTINATION SEARCH 4 Touch "Category". - 2012 Toyota RAV4 | Navigation Manual - Page 56
1. DESTINATION SEARCH - 2012 Toyota RAV4 | Navigation Manual - Page 57
Input a phone number. To set an address book entry as a destination using the phone number, the number must already be registered with the address book entry. (See page 98.) INFORMATION ● If there is no match for the phone number input, a list of identical numbers with different area codes will be - 2012 Toyota RAV4 | Navigation Manual - Page 58
the desired destination is selected, the "Confirm Destination" screen may be displayed. If "Go" is touched on the "Confirm Destination" screen, the navigation system performs a search for the route. (See "STARTING ROUTE GUIDANCE" on page 71.) The list of previous destinations can also be deleted by - 2012 Toyota RAV4 | Navigation Manual - Page 59
, dealers, hospitals or fire stations. ● The navigation system does not guide in areas where route guidance is unavailable. (See page 119.) ● The emergency function can be used even while driving. ● While driving, only the currently displayed items and the items on the next page can be viewed - 2012 Toyota RAV4 | Navigation Manual - Page 60
If "Go" is touched on the "Confirm Destination" screen, the navigation system performs a search for the route. (See "STARTING ROUTE GUIDANCE" on If the same 2 streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. - 2012 Toyota RAV4 | Navigation Manual - Page 61
3 NAVIGATION SYSTEM 7 Either a freeway "Entrance" or "Exit" can be selected. ● Be sure to use the complete name of the freeway or highway, including the hyphen, when entering the destination. Freeways and interstates use an "I" (I405). US highways use the state designation before the - 2012 Toyota RAV4 | Navigation Manual - Page 62
navigation system performs a search for the route. (See "STARTING ROUTE GUIDANCE" on page 71.) Guidance starts if "OK" is touched even while driving. However, the cursor cannot be moved. Touch "Del.Dest." on the "Destination" screen. When more than one destination is set, a list will be displayed - 2012 Toyota RAV4 | Navigation Manual - Page 63
Touch to change the route. (See page 73.) The system starts route view items such as name, address, position and phone number. "3 Routes" "Edit Route" Guidance can be paused or resumed. (See "PAUSING AND RESUMING GUIDANCE" on page 86.) If "OK" is touched until a beep sounds, demo mode will - 2012 Toyota RAV4 | Navigation Manual - Page 64
a route without traffic congestion. ● Route guidance may not be available if there is no road data for the specified location. ● changes to 0.5 miles (800 m) automatically. If this occurs, set the destination again. ● If a destination that is not located on a road is set, the vehicle will be guided - 2012 Toyota RAV4 | Navigation Manual - Page 65
Screen button "Add" "Delete" "Reorder" Function Touch to add destinations. Touch to delete destinations. Touch to reorder destinations. Touch to display the choices available when setting the conditions the system uses to determine the route to the destination. Page 81 82 81 "Preferences" 85 73 - 2012 Toyota RAV4 | Navigation Manual - Page 66
information screen will be displayed. This screen displays the distance to the next junction/exit, or POIs in the vicinity of the freeway exit. No. Function Distance to the next turn and an arrow indicating the turning direction Guidance route Current position Distance and travel/arrival time to - 2012 Toyota RAV4 | Navigation Manual - Page 67
an intersection, the intersection guidance screen will be displayed. 3 NAVIGATION SYSTEM No. Function Next street name Current Touch "Intersection", or press the "HOME" button and touch "Map", to change back to the freeway guidance screen. : Touch to hide the intersection guidance screen. - 2012 Toyota RAV4 | Navigation Manual - Page 68
2. ROUTE GUIDANCE OTHER SCREENS - 2012 Toyota RAV4 | Navigation Manual - Page 69
approaches an intersection, or point, where maneuvering the vehicle is necessary, the system's voice guidance will provide various messages. 4 miles 0.5 miles 5 miles 0.5 miles No. with higher speed limits, the voice guidance will be made at earlier points than on city streets in order to allow - 2012 Toyota RAV4 | Navigation Manual - Page 70
legal Uturn." "Make a legal U-turn ahead." (Beep sound only) The system announces the approach to the final destination. No. Voice guidance "In half of , your destination is ahead." "Your destination is ahead." "You have arrived at your destination. The route guidance is now finished." If a voice - 2012 Toyota RAV4 | Navigation Manual - Page 71
2. ROUTE GUIDANCE - 2012 Toyota RAV4 | Navigation Manual - Page 72
. ● When the vehicle is on the guidance route, the distance measured along the route is displayed. Travel time and arrival time are calculated based on the set vehicle speed information. (See "DRIVING SPEEDS" on page 108.) However, when the vehicle is not on the guidance route, the distance is the - 2012 Toyota RAV4 | Navigation Manual - Page 73
routes can be searched again. REORDERING DESTINATIONS When more than one destination is set, the arrival order of the destinations can be changed. 1 Touch "Route". 1 Touch "Route". 3 NAVIGATION SYSTEM 2 Touch "Add". 2 Touch "Reorder". 3 Input an additional destination in the same way as - 2012 Toyota RAV4 | Navigation Manual - Page 74
be deleted. 4 Touch "Yes" to delete the destination(s). If "Yes" is touched, the data cannot be recovered. If more than 1 destination has been set, the system will recalculate the route(s) to the set destination(s) as necessary. If "No" is touched, the previous screen - 2012 Toyota RAV4 | Navigation Manual - Page 75
the route can be changed to detour around a based on the traffic congestion information received from XM NavTraffic®. For details, see "XM NavTraffic®" on page 247. INFORMATION 1 Touch "Route". 3 NAVIGATION SYSTEM 2 Touch "Detour". ● This picture shows an example of how the system would guide - 2012 Toyota RAV4 | Navigation Manual - Page 76
road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through 2 or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting point, along with the distance to - 2012 Toyota RAV4 | Navigation Manual - Page 77
". "OK": Touch to start guidance. "Edit Route": Touch to change a route. (See page 73.) 3 NAVIGATION SYSTEM TO SELECT ROUTE FEATURES 2 Touch "Preferences". A number of choices are available when setting the conditions the system uses to determine the route to the destination. 1 Touch "Route - 2012 Toyota RAV4 | Navigation Manual - Page 78
2. ROUTE GUIDANCE 3 Select the desired route preference by touching the screen button. 3 Touch "Start from Adjacent Road". The system will avoid using routes that include items whose indicators are off. INFORMATION 4 After selecting the desired route preference, touch "OK". ● When there is - 2012 Toyota RAV4 | Navigation Manual - Page 79
on the map screen have already been set, "Change POI" is displayed. 3 NAVIGATION SYSTEM The map screen, with the current position displayed, will be returned to. A screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI list, see page 110.) SHOW - 2012 Toyota RAV4 | Navigation Manual - Page 80
of Interest categories if the desired Points of Interest cannot be found on the limited choice screen. "Find Local POI": Touch to search for the nearest POIs. Then select one of the categories. The system will list the points within 20 miles (32 km). (See page 88.) Touch the desired POI categories - 2012 Toyota RAV4 | Navigation Manual - Page 81
destination. (See "SEARCHING CHARGING STATIONS" on page 258.) NAVIGATION SYSTEM DISPLAY CHARGING STATION POI ICONS Charging station POI icons can be a destination. The map will shift so that the icon is centered on the screen and overlaps with the cursor . At this time, the distance from the - 2012 Toyota RAV4 | Navigation Manual - Page 82
touch "Enter ". The screen changes and displays the map location ICONS 1 Touch "Show on Map". ● This feature is available when the map scale is more than 30 miles (50 km Touch "Route Trace". The indicator is dimmed. The map screen will be displayed with the POI icons hidden. To display the POI - 2012 Toyota RAV4 | Navigation Manual - Page 83
2. ROUTE GUIDANCE TO STOP RECORDING THE ROUTE TRACE 1 Touch "Show on Map". 2 Touch "Route Trace". 3 NAVIGATION SYSTEM Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is erased. 91 - 2012 Toyota RAV4 | Navigation Manual - Page 84
Book'" on page 66.) Registered areas to avoid, will be avoided when the system searches for a route. On this screen, the 1 Press the "HOME" button. 2 Touch . Touch to set detailed navigation settings. SETTING UP THE "Home" If home has been registered "Navigation" on the "Setup" screen. 92 - 2012 Toyota RAV4 | Navigation Manual - Page 85
button. Press the "HOME" button. Touch on the "Main Menu" screen. Touch "Navigation" on the "Setup" screen. Touch "Home" on the "Navigation Settings" screen. Touch "Set Home". 3 5 NAVIGATION SYSTEM No. Function Registering home Editing home Deleting home Page 93 94 94 6 Touch the desired - 2012 Toyota RAV4 | Navigation Manual - Page 86
On" or "Off". (See page 100.) 7 Touch "OK". Touch "Navigation" on the "Setup" screen. Touch "Home" on the "Navigation Settings" screen. Touch "Edit". DELETING HOME 1 2 on the map. To edit location information. To edit the phone number. To change the icon to be displayed on the map. Page 100 - 2012 Toyota RAV4 | Navigation Manual - Page 87
search. (See "DESTINATION SEARCH" on page 56.) 3 NAVIGATION SYSTEM No. Function Registering a preset destination Editing a preset destination Deleting completed, the "Edit Preset Destination" screen will be displayed. Touch "Navigation" on the "Setup" screen. Touch "Preset Destinations" on the - 2012 Toyota RAV4 | Navigation Manual - Page 88
on the map. To edit location information. To edit the phone number. To change the icon to be displayed on the map. Page 100 1 2 3 4 5 Press the "HOME" button. Touch on the "Main Menu" screen. 101 101 99 Touch "Navigation" on the "Setup - 2012 Toyota RAV4 | Navigation Manual - Page 89
screen. Touch "Delete". 1 2 3 4 Press the "HOME" button. Touch on the "Main Menu" screen. Touch "Navigation" on the "Setup" screen. Touch "Address Book". 3 NAVIGATION SYSTEM 6 Touch the preset destination to be deleted. 5 Touch the desired screen button. Screen button "Select All" "Unselect - 2012 Toyota RAV4 | Navigation Manual - Page 90
phone number of a registered address book entry can be edited. 1 2 3 4 Press the "HOME" button. Touch on the "Main Menu" screen. Touch "Navigation" on the "Setup entry has been registered, the "Edit Address Book Entry" screen will be displayed. Touch the screen button of the desired address book - 2012 Toyota RAV4 | Navigation Manual - Page 91
3. ADDRESS BOOK 7 Touch "Edit" next to the item to be edited. - 2012 Toyota RAV4 | Navigation Manual - Page 92
3. ADDRESS BOOK - 2012 Toyota RAV4 | Navigation Manual - Page 93
3. ADDRESS BOOK - 2012 Toyota RAV4 | Navigation Manual - Page 94
Areas to be avoided because of traffic jams, construction work or other reasons can be registered as areas to avoid. Touch "Navigation" on the "Setup" screen. Touch "Areas to Avoid" on the "Navigation Settings" screen. Touch "New". 1 2 3 4 Press the "HOME" button. Touch on the "Main Menu" screen - 2012 Toyota RAV4 | Navigation Manual - Page 95
Press the "HOME" button. Touch on the "Main Menu" screen. NAVIGATION SYSTEM Touch "Navigation" on the "Setup" screen. Touch "Areas to Avoid" on the "Navigation Settings" screen. Touch "Edit". 8 9 Touch "Enter". Touch either or to change the size of the area to be avoided. 6 10 Touch "OK". When - 2012 Toyota RAV4 | Navigation Manual - Page 96
3. ADDRESS BOOK 7 Touch "Edit" next to the item to be edited. - 2012 Toyota RAV4 | Navigation Manual - Page 97
3. ADDRESS BOOK - 2012 Toyota RAV4 | Navigation Manual - Page 98
to avoid. Touch to cancel the "Select All" function. Press the "HOME" button. Touch on the "Main Menu" screen. Touch "Navigation" on the "Setup" screen. Touch "Delete Previous Dest.". 4 7 8 Touch "Delete". Touch "Yes" to delete the area(s) and touch "No" to cancel the deletion. 5 Touch the - 2012 Toyota RAV4 | Navigation Manual - Page 99
4. SETUP 1. DETAILED NAVIGATION SETTINGS Settings are available for driving speeds, favorite POI categories, automatic screen change, " Off" function, etc. 5 Touch the items to be set. 1 Press the "HOME" button. 6 Touch "Save". 3 SCREENS FOR NAVIGATION SETTINGS NAVIGATION SYSTEM 2 Touch - 2012 Toyota RAV4 | Navigation Manual - Page 100
or "Off". (See "AUTO AVOID TRAFFIC" on page DRIVING SPEEDS The speed that is used for the calculation of the estimated travel time and estimated arrival time can be set. 1 2 3 4 5 Press the "HOME" button. Touch on the "Main Menu" screen. Touch "Navigation" on the "Setup" screen. Touch "Detailed - 2012 Toyota RAV4 | Navigation Manual - Page 101
Info.". 6 7 Touch "On" or "Off". Touch "Save". 3 NAVIGATION SYSTEM 7 After setting of the desired speeds is completed, touch "Save". INFORMATION ● The displayed time to the destination is the approximate driving time that is calculated based on the selected speeds and the actual position - 2012 Toyota RAV4 | Navigation Manual - Page 102
POI categories. POI CATEGORY CHANGE (SELECT POI ICONS) Select up to 6 POI icons to be displayed on the map screen. 8 Touch the desired category. 1 2 3 4 5 Press the "HOME" button. Touch on the "Main Menu" screen. Touch "Navigation" on the "Setup" screen. Touch "Detailed Navi. Settings" on the - 2012 Toyota RAV4 | Navigation Manual - Page 103
"" Off" Function". Touch "Navigation" on the "Setup" screen. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. Touch "Calibration". NAVIGATION SYSTEM 6 Touch the screen buttons to be turned off. The selected screen buttons will be dimmed. 6 Touch the desired screen button - 2012 Toyota RAV4 | Navigation Manual - Page 104
4. SETUP - 2012 Toyota RAV4 | Navigation Manual - Page 105
4. SETUP 5 Touch "Pop-up Information". 6 7 Touch "On" or "Off". Touch "Save". When "Pop-up Information" is turned off, the following messages will not be displayed. 3 NAVIGATION SYSTEM This message appears when the map is displayed POI icons and the map scale is over 0.5 miles (800 m). This - 2012 Toyota RAV4 | Navigation Manual - Page 106
5 Press the "HOME" button. Touch on the "Main Menu" screen. on the "Setup" 3 Touch "Vehicle". Touch "Vehicle" screen. Touch "Maintenance" on the "Vehicle Settings" screen. Touch the desired screen button. When the vehicle needs to be serviced, the screen button color will change to orange. 114 - 2012 Toyota RAV4 | Navigation Manual - Page 107
Dealer" "Dealer Info." ● For scheduled maintenance information, refer to "Scheduled Maintenance Guide" or "Owner's Manual Supplement". ● Depending on driving or road conditions, the actual date and distance maintenance should be performed may differ from the stored date and distance in the system - 2012 Toyota RAV4 | Navigation Manual - Page 108
can be registered in the system. With dealer information registered, route guidance to the dealer is available. 7 Touch "Edit" next to the item to be edited. 1 2 3 4 5 Press the "HOME" button. Touch on the "Main Menu" screen. on the "Setup" Screen button "Dealer" Function Touch to enter the - 2012 Toyota RAV4 | Navigation Manual - Page 109
4. SETUP - 2012 Toyota RAV4 | Navigation Manual - Page 110
current position, normally using 4 or more satellites, and in some case 3 satellites. The GPS system has a certain level of inaccuracy. While the navigation system will compensate for this most of the time, occasional positioning errors of up to 300 feet (100 m) can and should be expected. Generally - 2012 Toyota RAV4 | Navigation Manual - Page 111
, the route guidance may not be available for the next turn to the right or left. • During high speed driving, it may take a long time for auto reroute to operate. In auto reroute, a detour route may be shown. • After auto reroute, the route may not be changed. • If an unnecessary U-turn is shown - 2012 Toyota RAV4 | Navigation Manual - Page 112
5. GPS (GLOBAL POSITIONING SYSTEM) 120 - 2012 Toyota RAV4 | Navigation Manual - Page 113
the steering wheel. No. Name Function The condition of Bluetooth® connection No connection Good An antenna for the Bluetooth® connection is built in the instrument panel. The condition of the Bluetooth® connection may deteriorate and the system may not function when a Bluetooth® phone is used - 2012 Toyota RAV4 | Navigation Manual - Page 114
reception Poor Excellent The level of reception does not always correspond with the level displayed on the cellular phone. The level of reception may not be displayed depending on the phone you have. When the cellular phone is out of the service area or in a place inaccessible by radio waves, "No - 2012 Toyota RAV4 | Navigation Manual - Page 115
phone has a low battery. ● When using Bluetooth® audio and hands-free at the same time, the following problems may occur: ® connection may be • The Bluetooth cut. ® • Noise may be heard on the Bluetooth audio playback. ● This system supports the following services: ® Specification • Bluetooth - 2012 Toyota RAV4 | Navigation Manual - Page 116
will not be possible. ● If the connected Bluetooth® phone version is older than recommended or incompatible, this function may not be used. ● Refer to http://www.toyota.com/ bluetooth to find approved Bluetooth® phones for this system. INFORMATION Bluetooth is a registered trademark of Bluetooth - 2012 Toyota RAV4 | Navigation Manual - Page 117
the system can be initialized: • Phonebook data • Call history data • Speed dial data ® phone data • Bluetooth • Phone sound settings • Phone Once initialized, the data and settings will be erased. Pay much attention when initializing the data. ● When a phone's registration is deleted, the above- - 2012 Toyota RAV4 | Navigation Manual - Page 118
person's body (excluding extremities: hands, wrists, feet and ankles). ● Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. 4 PHONE 127 - 2012 Toyota RAV4 | Navigation Manual - Page 119
while driving. See "REGISTERING A Bluetooth® DEVICE" on page 165 of additional registration when registering. For details about entering the passcode into the Bluetooth® device, see the manual that comes with it. A passcode is not required for SSP (Secure Simple Pairing) compatible Bluetooth® phones - 2012 Toyota RAV4 | Navigation Manual - Page 120
to try again. If the Bluetooth® phone Bluetooth® audio function has a When another Bluetooth® device is connected When the Bluetooth® phone to be registered has a Bluetooth® audio function, this audio function will be registered automatically at the same time and this screen may be displayed - 2012 Toyota RAV4 | Navigation Manual - Page 121
PHONE OPERATION MANUALLY When the auto connection has failed or "Bluetooth* Power" is turned off, it is necessary to connect Bluetooth® manually. 1 When the "POWER" switch is in ACCESSORY or ON mode, the system searches for a nearby registered cellular phone. The system will connect with the phone - 2012 Toyota RAV4 | Navigation Manual - Page 122
*" screen is displayed. RECONNECTING THE Bluetooth® PHONE If a Bluetooth® phone is disconnected due to poor reception from the network when the Bluetooth® "POWER" switch is in ACCESSORY or ON mode, the system automatically reconnects the Bluetooth® phone. When "Display Phone Status" is set to "On - 2012 Toyota RAV4 | Navigation Manual - Page 123
number. This cannot be operated while driving. 1 Press the "HOME" button and touch "Phone", or press the the steering wheel. switch on 1 Touch "Contacts". 2 Touch the desired key to input the phone number. 2 Touch the desired data from the list. Each time is deleted. is touched, an input - 2012 Toyota RAV4 | Navigation Manual - Page 124
which can be selected from a phonebook. (See "REGISTERING THE SPEED DIAL" on page 153 for registering the speed dial.) This can be done while driving. PBAP incompatible but OPP compatible models 1 Touch "Speed Dials". 3 Transfer the phonebook data to the system using the Bluetooth® phone. 133 - 2012 Toyota RAV4 | Navigation Manual - Page 125
tab while driving. Missed: calls that were missed Incoming: calls that were received Outgoing: calls that were made 3 Touch or press the on the steering wheel. switch CALLS CAN BE MADE USING THE LATEST CALL HISTORY ITEM 1 Touch "Call History". 1 Press the "HOME" button and touch "Phone", or - 2012 Toyota RAV4 | Navigation Manual - Page 126
types of phones: Home, Mobile, Office and Other. Short or abbreviated names in the phonebook may not be recognized. Change names in the phonebook to full names. Sometimes a voice recognition result confirmation screen will be displayed. After confirming the result, say "Yes" or "No". When the system - 2012 Toyota RAV4 | Navigation Manual - Page 127
3 Say "Dial" to call the phone number. When the system recognizes multiple phone numbers, a phone number candidate list will be displayed on the screen. If the desired phone number is not displayed on the top of the screen, say the number of the desired phone number from the candidate list (number - 2012 Toyota RAV4 | Navigation Manual - Page 128
can be made to an SMS (Short Message Service)/MMS (Multimedia Messaging Service) message sender's phone number. This can be operated while driving. BY POI CALL A call can be made by touching when it is displayed on the screen from the navigation system. (See "TO SEE INFORMATION ABOUT THE ICON WHERE - 2012 Toyota RAV4 | Navigation Manual - Page 129
OPERATION 5. RECEIVE ON THE Bluetooth® PHONE When a call is received, this screen is displayed with a sound. 1 Touch or press the switch on the steering wheel to talk on the phone. To refuse to receive the call: Touch or press the switch on the steering wheel. To adjust the volume of a received - 2012 Toyota RAV4 | Navigation Manual - Page 130
switch on the steering wheel. To hang up the phone: Touch or press the switch on the steering wheel. To mute your voice driving. ● Changing from hands-free call to cellular phone call is not possible while driving. ● When cellular phone call is changed to hands-free call, the hands-free screen will - 2012 Toyota RAV4 | Navigation Manual - Page 131
of voice recognition, see "VOICE COMMAND SYSTEM" on page 224.) Each time is touched or the switch on the steering wheel is pressed during an interrupted call, the party who is on hold will be switched. INFORMATION ● If your cellular phone does not support HFP Ver. 1.5, this function cannot be - 2012 Toyota RAV4 | Navigation Manual - Page 132
function. Touch "-" or "+" or use the volume switch on the steering wheel to adjust the message read out volume. The message read out function is available even while driving. When the received message is an email and "Update Message Read Status on Phone" is set to "On", "Mark as Unread" or "Mark as - 2012 Toyota RAV4 | Navigation Manual - Page 133
1. PHONE OPERATION REPLYING (QUICK REPLY) EDITING REPLY MESSAGES 1 Touch "Reply". 1 a sending message screen is displayed. 3 Touch "OK" when editing is completed. This screen will be displayed if message delivery fails. 4 Touch "Retry" to attempt to send the message again or touch "Cancel" - 2012 Toyota RAV4 | Navigation Manual - Page 134
will be heard when a new message arrives. (See "MESSAGE SETTINGS" on page 157.) 1 Touch "Read" to check the message. The "Messages" screen will will be automatically read out. (See "MESSAGE SETTINGS" on page 157.) For SMS/MMS, touching or 4 PHONE pressing the switch on the steering wheel - 2012 Toyota RAV4 | Navigation Manual - Page 135
2 Touch . 2 Perform each setting according to the procedures outlined on the following pages. 3 Touch "Phone". 3 When all settings are completed, touch "Save". INFORMATION ● The system will automatically increase the volume when the speed exceeds 50 mph (80 km/h). 4 Perform each setting - 2012 Toyota RAV4 | Navigation Manual - Page 136
. Touch "Yes". PHONEBOOK The call history can be deleted and phonebook and speed dial settings can be changed. 1 3 Touch "OK". Press the "HOME" button. Touch on the "Main Menu" screen. RING TONE SETTING 2 3 4 Touch "Phone" on the "Setup" screen. Touch "Phonebook". 1 Touch "Ring Tone" on the - 2012 Toyota RAV4 | Navigation Manual - Page 137
2. SETUP 5 Perform each setting according to the procedures outlined on the following pages. 6 Perform each setting according to the procedures outlined on the following pages. INFORMATION - 2012 Toyota RAV4 | Navigation Manual - Page 138
2. SETUP - 2012 Toyota RAV4 | Navigation Manual - Page 139
incompatible but OPP compatible Bluetooth® phones This screen appears while transferring. To cancel this function touch "Cancel". If "Add Contacts" is touched and there is an interruption during the transfer of data, the phonebook data transferred until then will be stored in the system. This is not - 2012 Toyota RAV4 | Navigation Manual - Page 140
is complete, "Done" will appear on the screen. Touch "Done". When another Bluetooth® device is connected 4 This screen is displayed. The following operations are performed in the same manner as when they are performed from the "Setup" screen. When another Bluetooth® device is currently connected - 2012 Toyota RAV4 | Navigation Manual - Page 141
2. SETUP 3 Input the phone number and touch "OK". - 2012 Toyota RAV4 | Navigation Manual - Page 142
2. SETUP - 2012 Toyota RAV4 | Navigation Manual - Page 143
2. SETUP 2 Touch the desired data or "Select All", then touch "Delete". 5 Touch "Delete". 6 Multiple data can be selected and deleted at the same time. Touch "Yes". INFORMATION 3 Touch "Yes". - 2012 Toyota RAV4 | Navigation Manual - Page 144
2. SETUP 6 Perform each setting according to the procedures outlined on the following pages. 3 Touch "Options". 4 - 2012 Toyota RAV4 | Navigation Manual - Page 145
2. SETUP 2 Touch the desired data to be registered. 6 When this screen is displayed, the operation is complete. 3 Touch the desired phone number. - 2012 Toyota RAV4 | Navigation Manual - Page 146
4 PHONE 6 6 Touch the desired phone number. This screen is displayed. From the "Contact" screen 1 The following operations are performed in the same manner as when they are performed from the "Setup" screen. Press the "HOME" button and touch "Phone", or press the the steering wheel. switch - 2012 Toyota RAV4 | Navigation Manual - Page 147
data can be selected and deleted at the same time. Multiple data can be selected and deleted at the same time. 3 Touch "Yes". 4 Touch "Yes". DELETING CALL HISTORY The call history can be deleted. For PBAP compatible phones, delete the call history after setting "Automatically Download Call - 2012 Toyota RAV4 | Navigation Manual - Page 148
Message settings can be changed. Deleting after call history has been displayed 1 2 3 4 Press the "HOME" button. Touch on the "Main Menu" screen. 1 Press the "HOME" button and touch "Phone", or press the the steering wheel. switch on Touch "Phone" on the "Setup" screen. Touch "Messaging - 2012 Toyota RAV4 | Navigation Manual - Page 149
"Phone", or press the the steering wheel. switch on 2 3 Touch "Messages" on the "Phone" screen. Touch "Options". phone's message read and unread status update function to "On" or "Off". Touch to edit "Edit Quick Reply Messages". (See "EDIT QUICK REPLY MESSAGES" on page 160.) To reset all setup - 2012 Toyota RAV4 | Navigation Manual - Page 150
2. SETUP NEW MESSAGE NOTIFICATION VOLUME SETTINGS The new message notification volume new message notification tone. PHONE 3 Touch "OK". INFORMATION New message notification tones can be heard by touching the screen buttons. 3 Touch "OK". ● The system will automatically increase the volume - 2012 Toyota RAV4 | Navigation Manual - Page 151
2. SETUP MESSAGE READ OUT VOLUME SETTINGS Message read out volume can be 2 Touch the screen button corresponding to the desired message. 3 Touch "OK". INFORMATION 3 4 ● The system will automatically increase the volume when the speed exceeds 50 mph (80 km/h). Use the software keyboard to edit - 2012 Toyota RAV4 | Navigation Manual - Page 152
2. SETUP 2 Touch "Yes". SCREEN FOR "Phone Display Settings" PHONE DISPLAY SETTINGS The phone display settings can be changed. 1 2 3 4 Press the "HOME" button. Touch on the "Main Menu" screen. On this screen, the following functions can be operated: No. Function Touch to change the incoming - 2012 Toyota RAV4 | Navigation Manual - Page 153
2. SETUP INCOMING CALL DISPLAY wheel switches. "Drop Down" mode ROTATING CONTACT IMAGES 1 Touch "Incoming Mode". Call Display For PBAP compatible models, when "Contact Image for Incoming Calls" is set to "On", images stored together with phone numbers in the cellular phone's phonebook will - 2012 Toyota RAV4 | Navigation Manual - Page 154
2. SETUP INITIALIZING THE SETTINGS The settings can be initialized. 1 Touch "Default". 2 Touch "Yes". 4 PHONE 163 - 2012 Toyota RAV4 | Navigation Manual - Page 155
the "HOME" button. 1 2 3 4 2 Touch . Press the "HOME" button. Touch on the "Main Menu" screen. Touch "Bluetooth*" on the "Setup" screen. Touch "Registered Devices". 5 3 Touch "Bluetooth*". Perform each setting according to the procedures outlined on the following pages. 4 Perform each setting - 2012 Toyota RAV4 | Navigation Manual - Page 156
2. SETUP REGISTERING A Bluetooth® DEVICE Bluetooth® devices compatible with phones (HFP) and portable players (AVP) can be registered simultaneously. Phones (HFP) and portable players (AVP) (maximum of 5) can be registered. A passcode is not required for SSP (Secure Simple Pairing) compatible - 2012 Toyota RAV4 | Navigation Manual - Page 157
. Depending on the type of phone, the phone number may not be displayed. "Profiles": The compatibility profile of the Bluetooth® device is displayed on the screen. "Connect Portable Player from": There are 2 portable player connection settings available; "Vehicle" and "Portable Player". Multiple - 2012 Toyota RAV4 | Navigation Manual - Page 158
2. SETUP 2 Touch the device to be edited. - 2012 Toyota RAV4 | Navigation Manual - Page 159
can be registered.) Although up to 5 Bluetooth® phones can be registered in the system, only one Bluetooth® phone can function at a time. 5 Touch the phone to be connected. The indicator of the selected Bluetooth® phone will turn on. If the desired Bluetooth® phone is not on the list, touch "Add - 2012 Toyota RAV4 | Navigation Manual - Page 160
portable players can be registered in the system, only one portable player can function at a time. 4 When a phone is connected while Bluetooth® audio is playing This screen is displayed, and the Bluetooth® audio will stop temporarily. 1 2 3 When another Bluetooth® device is connected When another - 2012 Toyota RAV4 | Navigation Manual - Page 161
. DETAILED Bluetooth® SETTINGS The Bluetooth® settings can be confirmed and changed. 7 When the result message is displayed, the portable player can be used. 1 2 3 4 Press the "HOME" button. Touch on the "Main Menu" screen. Touch "Bluetooth*" on the "Setup" screen. Touch "Detailed Bluetooth - 2012 Toyota RAV4 | Navigation Manual - Page 162
2. SETUP 5 This screen is displayed. CHANGING THE Bluetooth® SETTINGS The Bluetooth® settings can be changed according to the following procedures. - 2012 Toyota RAV4 | Navigation Manual - Page 163
2. SETUP 2 Touch "On" or "Off". - 2012 Toyota RAV4 | Navigation Manual - Page 164
2. SETUP - 2012 Toyota RAV4 | Navigation Manual - Page 165
AUDIO SYSTEM OPERATION 1. QUICK REFERENCE Operations such as selecting a preset station and adjusting the sound balance are carried out on the screen. Press the "HOME" button and touch "Radio" or "Media" to display the audio and step down the station band, change to the next or previous satellite - 2012 Toyota RAV4 | Navigation Manual - Page 166
of the basic features of the audio system. Some information may not pertain to your system. Your audio system works when the "POWER" switch is turned to ACCESSORY or ON mode. AUDIO SPLIT SCREEN DISPLAY The audio split screen can be displayed while the map screen is displayed. For details, see page - 2012 Toyota RAV4 | Navigation Manual - Page 167
1. AUDIO SYSTEM OPERATION SWITCHING BETWEEN FUNCTIONS INFORMATION 1 Press the "HOME" button. 2 Touch "Radio" or "Media". ● A function that enables automatic return to the previous screen from the audio screen can be selected. See page 46 for details. ● When the audio control mode is selected, - 2012 Toyota RAV4 | Navigation Manual - Page 168
1. AUDIO SYSTEM OPERATION 5 6 Touch the item to be set. Touch "OK". BALANCE A good balance of the left and right stereo channels and of the front and rear sound levels is also important. Keep in mind that when listening to a stereo recording or broadcast, changing the right/left balance will - 2012 Toyota RAV4 | Navigation Manual - Page 169
. ● When operating portable audio devices connected to the audio system, the volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself. ● When using a portable audio device connected to the power outlet, noise may occur during - 2012 Toyota RAV4 | Navigation Manual - Page 170
"CONNECTING A USB MEMORY" on page 196 and "CONNECTING iPod" on page 201. 1 Press the "HOME" button and touch "Media" to display the audio screen. Touch the "USB" or "iPod" tab. INFORMATION ● When a USB memory/iPod is not connected with the USB port, the tab will be dimmed. 5 AUDIO SYSTEM 181 - 2012 Toyota RAV4 | Navigation Manual - Page 171
1. AUDIO SYSTEM OPERATION 3. RADIO OPERATION LISTENING TO THE RADIO SELECTING A RADIO STATION " tab. INFORMATION ● Each time the screen button is pressed during seek tuning, the stations will be searched automatically one after another. ● The radio automatically changes to stereo reception when a - 2012 Toyota RAV4 | Navigation Manual - Page 172
. To scan all the frequencies: Touch "SCAN". "SCAN" will appear on the screen. The radio will find the next station and stay there for 10 seconds if "ALL screen button. The station's frequency will be displayed in the screen button. AUDIO SYSTEM To change the preset station to a different one, - 2012 Toyota RAV4 | Navigation Manual - Page 173
1. AUDIO SYSTEM OPERATION RADIO BROADCAST DATA SYSTEM This audio system is equipped with Radio Broadcast Data Systems ( Rhythm and Blues) • Sports • Talk • Traffic (Not available when "HD Radio Settings" are set to analog.) • Alert (Emergency Alert) 3 Touch "TYPE SEEK" and the system will start - 2012 Toyota RAV4 | Navigation Manual - Page 174
seek a traffic program station. "TRAF SEEK" will appear on the screen. INFORMATION ● If no traffic program station is found, "No Traffic" will appear on the screen. ● If a traffic program station is found, the name of the traffic program station will be displayed for a while. 5 AUDIO SYSTEM 185 - 2012 Toyota RAV4 | Navigation Manual - Page 175
clear audio with no static or distortion. For more information, and a guide to available radio stations will change to a bright orange color. The song title, artist name and music genre will appear on the screen when available by the radio station. 4 This screen will be displayed if "Options - 2012 Toyota RAV4 | Navigation Manual - Page 176
which had been listened to on their radio. INFORMATION Each time "Multicast" is touched, the supplemental program changes. If "Multicast" is touched when tuned to the last of the supplemental programs, the main program will be returned to. 5 AUDIO SYSTEM TAG 1 Touch "Tag" to bookmark the music - 2012 Toyota RAV4 | Navigation Manual - Page 177
1. AUDIO SYSTEM OPERATION TROUBLESHOOTING GUIDE Experience Mismatch of time alignment- a user may hear a short period of is not available until HD Radio™ broadcast can be decoded and make the audio available. This takes up to 7 seconds. Data service issue by the radio broadcaster. Audio mute delay - 2012 Toyota RAV4 | Navigation Manual - Page 178
1. AUDIO SYSTEM OPERATION HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and "Arc" logos are proprietary trademarks of iBiquity Digital Corp. 5 AUDIO SYSTEM 189 - 2012 Toyota RAV4 | Navigation Manual - Page 179
activating an XM service or when reporting a problem. If "CH 000" is selected using the or U.S.A. Refer to www.siriusxm.com or call 1-800-967-2346. Canada Refer to www.xmradio.ca or call 1-877-209-0079. on the audio control screen, the ID code, which is 8 alphanumeric characters, will be displayed - 2012 Toyota RAV4 | Navigation Manual - Page 180
SYSTEM 3 Touch the "SAT" tab. PRESETTING A CHANNEL 1 2 Tune in the desired channel. Touch one of the left side screen buttons (1-6) and hold it until a beep is heard. This sets the frequency to the screen button. The channel number will be displayed in the screen button. 4 Touch . To change - 2012 Toyota RAV4 | Navigation Manual - Page 181
AUDIO SYSTEM channel within the current category: Touch or on the audio control screen. The radio will change up or down to a channel within the current will not be fully displayed.) To scan the currently selected channel category: Touch "SCAN". "SCAN" appears on the screen. The radio will find - 2012 Toyota RAV4 | Navigation Manual - Page 182
1. AUDIO SYSTEM OPERATION IF THE SATELLITE RADIO TUNER MALFUNCTIONS When problems occur with the XM tuner, a message will appear on the screen. Referring to the table below to identify the problem, take the suggested corrective action. Message Explanation The XM antenna is not connected. Check - 2012 Toyota RAV4 | Navigation Manual - Page 183
1. AUDIO SYSTEM OPERATION NOTICE ● This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This - 2012 Toyota RAV4 | Navigation Manual - Page 184
be used.* ● Some parts of "Apps" can be adjusted using the switches on the steering wheel. ● If internet radio has never been listened to by activating "Apps" from the "Main Menu" screen, the "Apps" tab will be dimmed. 5 AUDIO SYSTEM For details, refer to http:// *: www.toyota.com/entune/ or call - 2012 Toyota RAV4 | Navigation Manual - Page 185
1. AUDIO SYSTEM OPERATION 7. USB MEMORY OPERATION Connecting a USB memory enables users to enjoy music from the vehicle speakers. CONNECTING A USB MEMORY 1 CAUTION ● Do not operate the player's controls or connect the USB memory while driving. Open the cover and connect a USB memory. NOTICE ● - 2012 Toyota RAV4 | Navigation Manual - Page 186
1. AUDIO SYSTEM OPERATION PLAYING A USB MEMORY PLAYING AND PAUSING A USB MEMORY Tag mode INFORMATION ● When the USB memory is connected and the audio source is changed to USB memory mode, the USB memory will start playing the first file in the first folder. If the same device is removed and - 2012 Toyota RAV4 | Navigation Manual - Page 187
1. AUDIO SYSTEM OPERATION SELECTING A DESIRED FOLDER, ARTIST OR ALBUM SELECTING A DESIRED FILE/ TRACK 1 Touch the folder/album name screen button. - 2012 Toyota RAV4 | Navigation Manual - Page 188
1. AUDIO SYSTEM OPERATION - 2012 Toyota RAV4 | Navigation Manual - Page 189
1. AUDIO SYSTEM OPERATION RANDOM ORDER Files or folders can be automatically and randomly selected. - 2012 Toyota RAV4 | Navigation Manual - Page 190
the iPod while driving. Open the cover and connect iPod using an iPod cable. NOTICE ● Do not leave your portable player in the car. In particular (See "ENTUNE SERVICE" on page 252.) Turn on the power of the iPod if it is not turned on. 2 Press the "HOME" button. 5 AUDIO SYSTEM INFORMATION ● - 2012 Toyota RAV4 | Navigation Manual - Page 191
iPod cover art that is saved in JPEG format can be displayed. ● When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume playing from the same point it was last used. ● Depending on the iPod that is connected to the system, certain functions may not be available - 2012 Toyota RAV4 | Navigation Manual - Page 192
1. AUDIO SYSTEM OPERATION - 2012 Toyota RAV4 | Navigation Manual - Page 193
1. AUDIO SYSTEM OPERATION - 2012 Toyota RAV4 | Navigation Manual - Page 194
(Recommended: Ver.1.4 or higher) ● Refer to http://www.toyota.com/ bluetooth to find approved Bluetooth® devices for this system. 5 AUDIO SYSTEM CAUTION ● Do not operate the player's controls or connect to the Bluetooth® audio system while driving. NOTICE ● Do not leave your portable player in - 2012 Toyota RAV4 | Navigation Manual - Page 195
battery charge left. Empty Full Portable player information is registered when the portable player is connected to the Bluetooth® audio system. When selling or disposing of the vehicle, remove the Bluetooth® audio information from the system. (See "DELETING A Bluetooth® DEVICE" on page 166.) 206 - 2012 Toyota RAV4 | Navigation Manual - Page 196
any other antenna or transmitter. ● For operating the portable player, see the instruction manual that comes with it. 5 AUDIO SYSTEM WHEN "Bluetooth* Power" IS ON The portable player will be automatically connected under the following conditions: • The "POWER" switch is in either ACCESSORY or ON - 2012 Toyota RAV4 | Navigation Manual - Page 197
AUDIO SYSTEM OPERATION WHEN "Bluetooth* Power" IS OFF Manually connect the portable player in accordance with the following procedure. INFORMATION 1 Touch "Connect". 2 Touch the desired portable player. ● Touching "Connect Portable Player" on the "Bluetooth*" screen also connects a Bluetooth - 2012 Toyota RAV4 | Navigation Manual - Page 198
1. AUDIO SYSTEM OPERATION PLAYING Bluetooth® AUDIO PLAYING AND PAUSING Bluetooth® AUDIO SELECTING A DESIRED TRACK/FOLDER/ALBUM - 2012 Toyota RAV4 | Navigation Manual - Page 199
1. AUDIO SYSTEM OPERATION , : Touch to move the list up or down by 5 track/folder groups. If either of these screen buttons is touched when the top/ bottom - 2012 Toyota RAV4 | Navigation Manual - Page 200
1. AUDIO SYSTEM OPERATION INFORMATION REPEATING The track or album currently being listened to can be repeated. ● Depending on the portable player that is connected to the system, certain functions may not be available. - 2012 Toyota RAV4 | Navigation Manual - Page 201
1. AUDIO SYSTEM OPERATION RANDOM ORDER Tracks or albums can be automatically and randomly selected. - 2012 Toyota RAV4 | Navigation Manual - Page 202
) Some parts of the audio system can be adjusted using the switches on the steering wheel. To step up or down the frequency, press and hold the switch even after you hear a beep. When you release from the switch, the radio will begin seeking up or down for a station. Do this again to find the next - 2012 Toyota RAV4 | Navigation Manual - Page 203
. Power lines or phone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther the vehicle is from a station, the weaker its signal will be. In addition, reception conditions change constantly as the vehicle moves. Here, some common reception problems that - 2012 Toyota RAV4 | Navigation Manual - Page 204
iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and . The emphasis function is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz. 5 AUDIO SYSTEM COMPATIBLE MODELS The following iPod - 2012 Toyota RAV4 | Navigation Manual - Page 205
with the audio player. The player is compatible with VBR (Variable Bit Rate). When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be or 9999 files in the device. The order changes depending on the personal computer and MP3/WMA encoding software you use. 216 - 2012 Toyota RAV4 | Navigation Manual - Page 206
, MusicID, MediaVOCS, the Gracenote logo and logotype, and the "Powered by Gracenote" logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries. 5 AUDIO SYSTEM MP3 MP3 is an audio compression standard determined by a working group (MPEG) of the - 2012 Toyota RAV4 | Navigation Manual - Page 207
AUDIO SYSTEM OPERATION User functions of this application or device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your against you directly in its own name. The Gracenote service uses a unique identifier to track queries for statistical purposes - 2012 Toyota RAV4 | Navigation Manual - Page 208
or to change data services at any time WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES. copyright © Gracenote 2000 to present 5 AUDIO SYSTEM - 2012 Toyota RAV4 | Navigation Manual - Page 209
2. SETUP 1. AUDIO SETTINGS HD Radio™ SYSTEM SETTINGS HD Radio™ system can be set using the procedure outlined below. 5 Select the desired setting from "HD Radio/Analog Setting". 1 2 Press the "HOME" button. Touch . Screen button "All" - 2012 Toyota RAV4 | Navigation Manual - Page 210
2. SETUP iPod SETTINGS iPod can be set using the procedure outlined below. 1 2 3 4 Press the "HOME" button. Touch on the "Main Menu" screen. Touch "Audio" on the "Setup" screen. Touch "iPod Settings". 5 Touch "Display Cover Art" and set it to "On" or "Off". 5 AUDIO SYSTEM 221 - 2012 Toyota RAV4 | Navigation Manual - Page 211
2. SETUP 222 - 2012 Toyota RAV4 | Navigation Manual - Page 212
Shortcut Menu" screen has been displayed, voice guidance will commence. Voice guidance for the voice command system can be skipped by pressing the talk switch. ● to the commands. (See page 232.) For example: Say "Find nearby dining", "Call John" etc. Saying "Help" prompts voice guidance to offer - 2012 Toyota RAV4 | Navigation Manual - Page 213
2 consecutive times, the voice command guidance system will say "Paused. To restart voice recognition, push the talk switch. To cancel voice recognition, push and hold the talk switch." Voice recognition will then be suspended. Touch "Cancel" or "Go Back", or press the switch on the steering wheel - 2012 Toyota RAV4 | Navigation Manual - Page 214
"Go home". A confirmation screen will be displayed showing the recognition results. Say "Yes" or touch "Yes". The system starts searching for a route to air conditioning speed is set high. • The air conditioning vents are turned towards the microphone. ● In the following conditions, the system - 2012 Toyota RAV4 | Navigation Manual - Page 215
and search for a destination route by voice command operation. 6 VOICE COMMAND SYSTEM 3 Say "". Say the desired city name that belongs to the set state in the place of the "". Say "Change State" to change the set voice recognition state. 4 Say "". Say the desired - 2012 Toyota RAV4 | Navigation Manual - Page 216
, refer to the "AUDIO SYSTEM" section of this manual. 3 Say "Yes" or touch "Yes". The system starts playing music. Music recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more - 2012 Toyota RAV4 | Navigation Manual - Page 217
1. VOICE COMMAND SYSTEM OPERATION INFORMATION ● A USB memory or iPod must be connected to enable track under the following conditions: • When the USB memory or iPod data has changed. • When the voice recognition language is changed. (See page 49.) ● While the recognition data is being created or - 2012 Toyota RAV4 | Navigation Manual - Page 218
will be shown based on the part of the command that was recognized.) "Weather" "Sports Scores" "Stock Quotes" EXPRESSION EXAMPLES FOR EACH FUNCTION Command "Go Home" "Enter an Address" Expression examples Let's go home. Take me home. I wanna enter an address, please. Put in an address. Find - 2012 Toyota RAV4 | Navigation Manual - Page 219
3. EXPANDED VOICE COMMANDS Touching "On" next to "Expanded Voice Commands" on the "Voice Settings" screen enables voice command operation of the audio system. (See page 52.) For more information on operations that can be controlled using expanded voice commands, refer to "COMMAND LIST". (See page - 2012 Toyota RAV4 | Navigation Manual - Page 220
. The functions available may vary according to the navigation system installed. Voice recognition language can be changed. (See "SELECTING A LANGUAGE" on page 49.) "Set a Destination" Command "Find Nearby " "Enter an Address" "Go Home" "Destination by Phone Number"*2 Action Displays - 2012 Toyota RAV4 | Navigation Manual - Page 221
1. VOICE COMMAND SYSTEM OPERATION "Play Music" Command "Play Artist " "Play Album " Action Plays tracks by the selected artist. For traffic incident list. Displays weather information. Displays the sports list. Displays the stocks list. Shortcut Menu O VOICE COMMAND SYSTEM O O O 6 233 - 2012 Toyota RAV4 | Navigation Manual - Page 222
mode. Selects the auxiliary audio mode. Selects the Bluetooth® audio mode. Selects the iPod audio mode. Selects the USB audio mode. Turns the audio system on. Turns the audio system off. Shortcut Menu O O O O O O O O O O *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. INFORMATION - 2012 Toyota RAV4 | Navigation Manual - Page 223
map data can be updated. INFORMATION ● Map data updates are available for a fee. Contact your Toyota dealer for further information. ● The "Map Information" screen displays Information" screen. Touch "Legal Info.". 3 4 The "Map Information" screen will be displayed. The "Legal Information" screen - 2012 Toyota RAV4 | Navigation Manual - Page 224
1. INFORMATION DISPLAY MAP COVERAGE Map data coverage areas can be displayed. 1 2 3 4 Press the "HOME" button. Touch "Info" on the "Main Menu" screen. Touch "Map Data" on the "Information" screen. Touch "Map Coverage". The "Map Data Coverage" screen will be displayed. 7 INFORMATION 237 - 2012 Toyota RAV4 | Navigation Manual - Page 225
877-2090079 (Canada). ● For further details about the service, contact your Toyota dealer. ● XM Satellite Radio is responsible for all fees and services, which are subject to change. *: XM Sports and XM Stocks are included with an XM Satellite Radio subscription. AVAILABILITY OF SERVICE(S) The XM - 2012 Toyota RAV4 | Navigation Manual - Page 226
service included with an XM Satellite Radio subscription. This service is also available with an XM TravelLink subscription. With this service, you can receive updates via the navigation system for which there is no current data available will be dimmed and you will not be able to select them. 7 - 2012 Toyota RAV4 | Navigation Manual - Page 227
. Touch "XM Sports" on the "Information" screen. Touch "Options". Up to 5 teams can be added and saved in the system for which information will be received. The desired teams can be changed at any time. Teams must be added one at a time. 2 Touch the desired sporting league of the team. 5 Perform - 2012 Toyota RAV4 | Navigation Manual - Page 228
3. XM FUNCTION OPERATION DELETE SPORTS TEAMS 1 Touch "Delete Sports Teams". 2 Touch the individual sports team to be deleted or touch "Select All" to delete all the teams, and touch "Delete". 3 Touch "Yes" to confirm or "No" to cancel. 7 INFORMATION 241 - 2012 Toyota RAV4 | Navigation Manual - Page 229
service included with an XM Satellite Radio subscription. This service is also available with an XM TravelLink subscription. With this service, you can receive updates via the navigation system saved in the system. 1 Press the "HOME" button. 2 Touch "Info". The selected data will be read out in - 2012 Toyota RAV4 | Navigation Manual - Page 230
". 3 When finished, touch "OK". Up to 10 individual stock symbols can be added and saved in the system for which information will be received. Stocks must be input one at a time. To enter a stock, the symbol of the desired stock must be known. DELETE STOCKS 5 Perform each setting according - 2012 Toyota RAV4 | Navigation Manual - Page 231
3. XM NavWeather™ The subscription-based XM ™ NavWeather service allows the navigation system to display weather information on the screen button is touched, city names and "Info" are displayed on the upper part of the screen. "Forecast" 2 Touch "Info". When this screen button is touched - 2012 Toyota RAV4 | Navigation Manual - Page 232
The scale of the map can be changed. Three zoom levels can be selected; 16 miles (26 km), 30 miles (48 km) and 60 miles (97 km). Weather icons and rain WEATHER INFORMATION Hurricane No. Storm Received time Flood City name 7 Today's date Winter INFORMATION Current weather Wind Current temperature - 2012 Toyota RAV4 | Navigation Manual - Page 233
Maximum temperature Minimum temperature Precipitation probability When an XM NavWeather™ warning is issued within the vicinity, the XM NavWeather™ indicator will appear on the map screen. WEATHER WARNINGS Weather warnings issued within a radius of approximately 15 miles (25 km) or 7.8 miles - 2012 Toyota RAV4 | Navigation Manual - Page 234
based XM ® NavTraffic service allows the navigation system to display traffic information on the map screen. The following operations can be performed: Show XM NavTraffic® Information: Traffic information is displayed on the map screen. (See page 248.) Auto Free Flowing Traffic" will not operate. 3 - 2012 Toyota RAV4 | Navigation Manual - Page 235
vehicle is on. If a route has not been set, "On Current Road" will be displayed. SHOW XM NavTraffic® INFORMATION 1 Touch "Show on Map". 5 This traffic information is displayed on the screen. Touch "Detail" to display detailed traffic event information. Touch "Traffic Information". The " - 2012 Toyota RAV4 | Navigation Manual - Page 236
When any XM NavTraffic® information is received, the XM NavTraffic® information arrow will appear on the map screen. The color of the arrow changes depending on the traffic information received. Color Red Yellow Green Function Heavy congestion Moderate traffic Freely flowing traffic XM NavTraffic - 2012 Toyota RAV4 | Navigation Manual - Page 237
4. SETUP 1. XM SETTINGS Used for changing settings for XM Sports and XM Stocks. 4 Touch the item to be set. 1 Press the "HOME" button. On this screen, the following functions can be - 2012 Toyota RAV4 | Navigation Manual - Page 238
received, via a cellular phone, from the contents provider servers are displayed on the navigation screen. Cellular phone*2 Application player Applications ("Apps") Navigation system *2:For known compatible phones, refer to http://www.toyota.com/entune/. *1: Entune is available in the 48 states - 2012 Toyota RAV4 | Navigation Manual - Page 239
were listened to • Input history INFORMATION *: For details, refer to http:// www.toyota.com/entune/ or call 1-800331-4331. AVAILABILITY OF SERVICE Entune is available in the 48 states, D.C. and Alaska. INFORMATION ● Once initialized, data will be erased. Pay close attention when initializing the - 2012 Toyota RAV4 | Navigation Manual - Page 240
. (See page 254.) Register a Bluetooth® phone with the hands-free system. (For detailed information about registration and settings, see "Bluetooth® SETTINGS" on page 164.) USER REGISTRATION When purchasing the vehicle, an email address is registered at your Toyota dealer. If your email address was - 2012 Toyota RAV4 | Navigation Manual - Page 241
2. ENTUNE OPERATION 1. ACTIVATING "Apps" Each time "Apps" is activated, the system checks for updates. When there are no updates available, the main menu screen will be displayed right after a screen indicating that updates are being checked for has been displayed. 4 Touch "Update". ACTIVATING " - 2012 Toyota RAV4 | Navigation Manual - Page 242
2. ENTUNE OPERATION 7 When updating is complete, the main menu screen will be displayed. The screen shown above is only an example. The actual screen may be different. For details about the function and service of each application displayed in the main menu, refer to http://www.toyota.com/ entune - 2012 Toyota RAV4 | Navigation Manual - Page 243
contacts." "There is a problem with the Bluetooth* connection. For troubleshooting assistance, please visit toyota.com or call 1-800-3314331." "This feature is unavailable during a handsfree call." "To use the services, an active application needs to be running on your phone. For more information - 2012 Toyota RAV4 | Navigation Manual - Page 244
above is only an example. The actual screen may be different. For details about the function and service of each application displayed in the main menu, refer to http://www.toyota.com/ entune/. 2 Touch "Apps". INFORMATION ● Some parts of "Apps" can be adjusted using the switches on the steering - 2012 Toyota RAV4 | Navigation Manual - Page 245
that a call is in progress will be displayed. 8 APPS For the operation of the route guidance screen and the function of each screen button, see "STARTING ROUTE GUIDANCE" on page 71. For phone operation and the function of each screen button, see "TALK ON THE Bluetooth® PHONE" on page 139. 259 - 2012 Toyota RAV4 | Navigation Manual - Page 246
ENTUNE OPERATION 3. INPUTTING KEYWORD OPERATION A keyword can be input to "Apps" by the software keyboard or voice recognition function. The keyboard layout can be changed. (See page 50.) For details . 3 Input characters will be reflected on the character input space. Completion of saying the - 2012 Toyota RAV4 | Navigation Manual - Page 247
2. ENTUNE OPERATION 3 Search results will be displayed on the screen. The screen shown above is only an example. The actual screen may be different. 8 APPS 261 - 2012 Toyota RAV4 | Navigation Manual - Page 248
2. ENTUNE OPERATION 262 - 2012 Toyota RAV4 | Navigation Manual - Page 249
LOCATION CODES AND RELATED PRODUCTS (COLLECTIVELY, THE "DATABASE"), USED IN THE NAVIGATION SYSTEM. BY USING THE NAVIGATION SYSTEM AND You shall not extract standalone data from or publish any part of the DATABASE without the prior written consent of TANA engineer any portion of the DATABASE. 268 - 2012 Toyota RAV4 | Navigation Manual - Page 250
system LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS INTERRUPTION OR THE LIKE, REGARDLESS OF WHETHER THE PARTY WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL the passage of time, changing circumstances, and due height, weight or other limits; - 2012 Toyota RAV4 | Navigation Manual - Page 251
11 Lafayette Street, Lebanon, NH 03766-1445. Phone: 603.643. 0330. The DATABASE is made by exempt from any statute, law, regulation, or code, including any Sunshine Act, Public Records Act, this clause void and unenforceable, in whole or in part, for any reason, this Agreement shall be considered - 2012 Toyota RAV4 | Navigation Manual - Page 252
, USPS, and ZIP+4. *original publication date TERMS AND CONDITIONS Personal Use Only. You agree to use this Data together with vehicle navigation system for the solely personal, non-commercial purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes - 2012 Toyota RAV4 | Navigation Manual - Page 253
the passage of time, changing circumstances, sources or that the Data or server will be uninterrupted or error-free. Disclaimer WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF DENSO OR ITS agree not to export from anywhere any part of the Data provided to you or any - 2012 Toyota RAV4 | Navigation Manual - Page 254
2.101 and is subject to these End-User Terms under which this data was provided. © 2009* NAVTEQ - All rights reserved. *original publication date If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal - 2012 Toyota RAV4 | Navigation Manual - Page 255
SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part engineer any portion of the POI Data. 3. Transfer You may not transfer the POI Data to third parties, except together with the system purposes, and not for service bureau, time-sharing or other similar purposes - 2012 Toyota RAV4 | Navigation Manual - Page 256
information, or that the information or server will be uninterrupted or error-free. Some states, , WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF DENSO OR ITS LICENSORS (including injuries resulting in death), demand, action, cost, expense, or claim of any kind or character - 2012 Toyota RAV4 | Navigation Manual - Page 257
END USER NOTICE The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product. 276 - 2012 Toyota RAV4 | Navigation Manual - Page 258
software contributed to Berkeley by the Systems Programming Group of the University of Utah Computer Science Department and Ralph Campbell. · T-Kernel This Product uses the Source Code of T-Kernel under T-License granted by the T-Engine Forum (www.t-engine.org). · C Library This product includes - 2012 Toyota RAV4 | Navigation Manual - Page 259
Regents of the University of California. All rights reserved. © UNIX System Laboratories, Inc. All or some portions of this file are derived of California. All rights reserved. This code is derived from software contributed to Berkeley by Berkeley Software Design, Inc. Copyright © 1992, 1993 The - 2012 Toyota RAV4 | Navigation Manual - Page 260
This software was developed by the Computer Systems Engineering group at Lawrence Berkeley Laboratory under DARPA Copyright © 1994 The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Andrew Hume of AT&T Bell Laboratories. - 2012 Toyota RAV4 | Navigation Manual - Page 261
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and - 2012 Toyota RAV4 | Navigation Manual - Page 262
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - 2012 Toyota RAV4 | Navigation Manual - Page 263
provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - 2012 Toyota RAV4 | Navigation Manual - Page 264
© 1997,98 The NetBSD Foundation, Inc. All rights reserved. This code is derived from software contributed to The NetBSD Foundation by J.T. Conklin. 2000, 2001 The NetBSD Foundation, Inc. All rights reserved. This code is derived from software contributed to The NetBSD Foundation by Jun-ichiro - 2012 Toyota RAV4 | Navigation Manual - Page 265
provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - 2012 Toyota RAV4 | Navigation Manual - Page 266
provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - 2012 Toyota RAV4 | Navigation Manual - Page 267
provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - 2012 Toyota RAV4 | Navigation Manual - Page 268
provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - 2012 Toyota RAV4 | Navigation Manual - Page 269
code BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR any portions thereof, and that both notices appear in supporting documentation. CARNEGIE MELLON ALLOWS FREE USE OF THIS Carnegie the rights to redistribute these changes. · TCP/IP, Socket Library - 2012 Toyota RAV4 | Navigation Manual - Page 270
provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - 2012 Toyota RAV4 | Navigation Manual - Page 271
Copyright © 2004 by Internet Systems Consortium, Inc. (""ISC"") Portions Copyright © 1996-1999 by Internet Software Consortium. Permission to use, copy, modify, and distribute this software for any purpose with or - 2012 Toyota RAV4 | Navigation Manual - Page 272
provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - 2012 Toyota RAV4 | Navigation Manual - Page 273
provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - 2012 Toyota RAV4 | Navigation Manual - Page 274
the agreement found in the ""LICENSE.H"" file distributed with this source code. ""LICENSE.H"" may not be removed from this distribution, modified, enhanced and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of CMU not be used in - 2012 Toyota RAV4 | Navigation Manual - Page 275
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - 2012 Toyota RAV4 | Navigation Manual - Page 276
covered by the same copyright terms except that the holder is Tim Hudson ([email protected]). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts - 2012 Toyota RAV4 | Navigation Manual - Page 277
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put