2013 Toyota Corolla Owners Manual - Page 595

1. SETUP OPERATION 2 When this screen is displayed, perform a device discovery from your Bluetooth device. INFORMATION 3 Input the passcode displayed on the screen into your Bluetooth device. A passcode is not required for SSP (Secure Simple Pairing) compatible Bluetooth® phones. Depending on the type of Bluetooth® phone being connected, a message confirming registration may be displayed on the Bluetooth® phone's screen. Respond and operate the Bluetooth® phone according to the confirmation message. If you want to cancel it, touch "Cancel". If the Bluetooth® phone to be registered has a Bluetooth® audio function, this can be registered at the same time. ● For details on device discovery for your Bluetooth phone, refer to the Bluetooth phone's user's guide. ● When you register your phone, Bluetooth® audio will disconnect. ● If the Bluetooth® device has Bluetooth® phone and Bluetooth® audio functions, it will register phone and audio simultaneously. If an on-screen message appears, follow the message and register either or both Bluetooth® phone and/ or Bluetooth® audio functions. REMOVING A Bluetooth® DEVICE 5 1 Touch "Remove" to remove your SETUP Bluetooth® device from the system. 4 When the connection is completed, this screen is displayed. 2 Select the device to remove. Once you have registered it, the system automatically connects to your Bluetooth® device every time you start your vehicle. INFORMATION ● When you delete a Bluetooth® phone, the phonebook data will be deleted at the same time. 99