2013 Toyota Corolla Owners Manual - Page 616

1. REAR VIEW MONITOR SYSTEM NOTICE ● If the back of the vehicle is hit, the position and mounting angle of the camera may change. Be sure to have the camera's position and mounting angle checked at your Toyota dealer. ● As the camera has a water proof construction, do not detach, disassemble or modify it. This may cause incorrect operation. ● If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally. ● Do not strongly rub the camera lens. If the camera lens is scratched, it can not transmit a clear image. ● Do not allow organic solvent, car wax, window cleaner or glass coat to adhere to the camera. If this happens, wipe it off as soon as possible. ● If the tire size is changed, the area displayed on the screen may change. ● When washing the vehicle, do not apply intensive bursts of water to the camera or camera area. Doing so may result in the camera malfunctioning. REAR VIEW MONITOR GUIDE LINES (IF EQUIPPED) Guide lines are displayed on the screen. Guidelines shown differ from those shown on the actual screen. Vehicle width extension guide lines (blue) These lines indicate the estimated vehicle width extension. Distance guide line (blue) This line indicates a position on the ground about 3 ft. (1 m) behind on the ground of the rear bumper of the vehicle. Distance guide line (red) This line indicates a position on the ground about 1.5 ft. (0.5 m) behind on the ground of the rear bumper of the vehicle. Vehicle center guide lines (blue) These lines indicate the estimated vehicle center on the ground. 6 REAR VIEW MONITOR SYSTEM INFORMATION ● If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets, snow, or mud adhere to the lens, rinse with water and wipe with a soft cloth. If the lens is extremely dirty, wash it with a mild cleanser and rinse. 121