2013 Toyota Highlander Navigation Manual
2013 Toyota Highlander Manual
2013 Toyota Highlander manual content summary:
- 2013 Toyota Highlander | Navigation Manual - Page 1
...Current position display ...Screen scroll operation (one−touch scroll) ...Switching the screens ...Map scale ...Foot print map ...Orientation of the map ...Map icons ...D Speech command system ...33 33 34 39 42 42 43 44 44 Command list ...47 25 - 2013 Toyota Highlander | Navigation Manual - Page 2
system - When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the initial screen will be displayed and the system will begin operating. Vehicles without smart key system - When the engine is touched, the screen will change back to the "CAUTION" screen. In about 5 seconds, or - 2013 Toyota Highlander | Navigation Manual - Page 3
replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen will be displayed when the navigation system is in operation. This - 2013 Toyota Highlander | Navigation Manual - Page 4
can be input via the touch screen. D To input letters and numbers To display the alphabet keys, touch "A−Z". INFORMATION Keyboard layout can be changed. (See page 263.) Enter letters by touching the keys directly. : Touching this button erases one letter. By holding this button, letters will - 2013 Toyota Highlander | Navigation Manual - Page 5
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 999, the system displays "∗∗" on the screen. 29 - 2013 Toyota Highlander | Navigation Manual - Page 6
BASIC FUNCTIONS D List screen operation When a list is displayed, use the appropriate button to scroll through the list. D Sorting The order of a list displayed on the screen can be rearranged. To shift to the next or previous page. Touch or to scroll through 1. Touch "Sort". the displayed list - 2013 Toyota Highlander | Navigation Manual - Page 7
and tone of the screen. You can also turn the display off, and change the screen to either day or night mode. D Contrast, brightness, color and tone adjustment The contrast, brightness, color and tone of the screen can be adjusted depending on the brightness of your surroundings. You can also turn - 2013 Toyota Highlander | Navigation Manual - Page 8
changes to day mode or night mode. Color and tone adjustment (with rear seat entertainment system) You can also use the remote control to make adjustments. 1. Touch the desired button to adjust color and tone. You can adjust the color and the tone while the DVD the system even with the engine turned - 2013 Toyota Highlander | Navigation Manual - Page 9
starting the navigation system, the current area. 1. Touch . The current vehicle position mark ( 1 ) appears in the center or bottom center of the map screen. A street name will appear on the bottom of the screen, depending on the scale of the map ( 2 ). You can return to this map screen that shows - 2013 Toyota Highlander | Navigation Manual - Page 10
set as a destination using the one−touch scroll function. Use the scroll feature to move the desired point to the center of the screen for looking vehicle proceeds along the designated route. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route - 2013 Toyota Highlander | Navigation Manual - Page 11
BASIC FUNCTIONS D To register the cursor position as an address book entry Address book entry registration enables easy access to a specific point. To change the icon or name, etc., see " (b) Editing address book entries" on page 110. Up to 100 address book entries can be registered. If there is - 2013 Toyota Highlander | Navigation Manual - Page 12
BASIC FUNCTIONS D To see information about the icon where the cursor is set POI INFORMATION When the cursor is set on a POI icon, the name and "Info." are displayed at the top of the screen. To display information about an icon, set the cursor on it. Touch "Info.". Information such as the name, - 2013 Toyota Highlander | Navigation Manual - Page 13
BASIC FUNCTIONS INFORMATION The desired Point of Interest can be displayed on the map screen. (See " - Display POI icons" on page 92.) ADDRESS BOOK ENTRY INFORMATION When the cursor is set on an address book entry icon, the name and "Info." are displayed at the top of the screen. Touch "Info.". - 2013 Toyota Highlander | Navigation Manual - Page 14
BASIC FUNCTIONS DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. Information such as the name, address, and phone number are displayed. If "Enter " is touched, the position of the cursor is set as a destination. If - 2013 Toyota Highlander | Navigation Manual - Page 15
BASIC FUNCTIONS - Switching the screens XMr NavTraffic TEXT INFORMATION When you touch the XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. Any one of the screen configurations can be selected. 1. Touch this button to display the following - 2013 Toyota Highlander | Navigation Manual - Page 16
. (See page 79.) D Screen configurations SINGLE MAP This is a regular map screen. While on a different screen, touching will display the single map screen. The screen shows the single map. 40 - 2013 Toyota Highlander | Navigation Manual - Page 17
the vehicle travels out of the coverage area, the guidance screen changes to the compass mode screen. This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Show XMr NavTraffic Info. (See page 98.) 4. Changing the orientation of the map Touch "OK - 2013 Toyota Highlander | Navigation Manual - Page 18
changes normally. By continuing to touch the button, the scale bar changes smoothly. The scale of the map display can be changed by touching the scale bar directly. It is not available is moved to the area which is not covered by the foot print map, the screen scale automatically changes to 150 feet - 2013 Toyota Highlander | Navigation Manual - Page 19
BASIC FUNCTIONS - Orientation of the map D To display building information Information is available only for buildings for which information is recorded on the map disc. The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the - 2013 Toyota Highlander | Navigation Manual - Page 20
Business facility Airport Military University Hospital Stadium Shopping mall Golf Speech command system - The speech command system enables you to operate the navigation system, audio system and hands−free system by giving a command. 1. Push the talk switch. After a beep sounds, the "Voice - 2013 Toyota Highlander | Navigation Manual - Page 21
outcome is not shown, or if no choices are available, say "Go back" or touch "Go Back" to return to the previous screen. To cancel speech command recognition, say "Cancel", touch "Cancel", or push and hold the talk switch. If the navigation system does not respond or the confirmation screen does not - 2013 Toyota Highlander | Navigation Manual - Page 22
103.) When the speech command is recognized, a map of the area around your home is displayed. " Microphone It is unnecessary to speak windows or moon roof are open D Passengers are talking while voice commands are spoken 3. Touch "Enter" or say "Enter", and the system starts searching for a route - 2013 Toyota Highlander | Navigation Manual - Page 23
. However, the XMr NavTraffic commands cannot be used where the XMr NavTraffic service is not available. (For details, see "XMr NavTraffic" page 98.) 1. Push the talk switch. INFORMATION In the following conditions, the system may not recognize the command properly and using speech commands may not - 2013 Toyota Highlander | Navigation Manual - Page 24
command list can be recognized. D Speech command example: Changing map screen 1. Push the talk switch. 2. Say "Command list". 3. Say "Dual map". To confirm commands on the screen, touch or to scroll through the command list. This function is available only when the vehicle is not moving. When or - 2013 Toyota Highlander | Navigation Manual - Page 25
BASIC FUNCTIONS D Speech command example:Changing map scale 1. Push the talk switch. 2. Say "Command list". 3. Say "Zoom in" or "Zoom out". To confirm commands on the screen, touch or to scroll through the command list. This function is available only when the vehicle is not moving. When or is - 2013 Toyota Highlander | Navigation Manual - Page 26
BASIC FUNCTIONS 50 - 2013 Toyota Highlander | Navigation Manual - Page 27
DESTINATION SEARCH SECTION DESTINATION SEARCH D Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Preset destinations ...Destination search by "Address" ...Destination search by "Point of Interest" ...Destination search by "Previous Destinations" - 2013 Toyota Highlander | Navigation Manual - Page 28
DESTINATION SEARCH Destination search - - Selecting the search area Change the selected region in order to set a destination from a different region by using "Address", "Point of Interest" or "Intersection & Freeway". Push the "DEST" button. 1. Touch "Search Area" to display a map of the United - 2013 Toyota Highlander | Navigation Manual - Page 29
DESTINATION SEARCH U.S.A. Button "US1" "US2" States included in the search region Idaho Oregon Washington California Nevada Arizona Colorado Montana New Mexico Utah Wyoming Iowa Kansas Minnesota Missouri North Dakota Nebraska South Dakota Oklahoma Texas Illinois Indiana Kentucky Michigan Ohio - 2013 Toyota Highlander | Navigation Manual - Page 30
home if "OK" is touched even while driving. 2. Touch any of the preset destination touch screen buttons on the "Destination" screen. The screen changes and displays the map location of the preset destination point and the route preference. (See "Starting route guidance" on page 72.) If a preset - 2013 Toyota Highlander | Navigation Manual - Page 31
DESTINATION SEARCH - Destination search by "Address" There are 2 ways to search a destination by address. (a) Search by city (b) Search by street address 1. Push the "DEST" button. 2. Touch "Address" on the "Destination" screen. (a) Selecting a city to search 1. Push the "DEST" button. 2. Touch " - 2013 Toyota Highlander | Navigation Manual - Page 32
Input the street name and touch "OK". 8. Input a house number. 7. When the desired street name is found, touch the corresponding button. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) If the same - 2013 Toyota Highlander | Navigation Manual - Page 33
Touch "Last 5 Cities". 3. Touch "Street Address". 2. Touch the button of the desired city name. If the navigation system has never been used, this function will not be available. The current screen changes to the screen for inputting a street name. (See "(a) Selecting a city to search" on page 55 - 2013 Toyota Highlander | Navigation Manual - Page 34
72.) If the same address exists in more than one city, the current screen changes inputting the city name or to the address list screen. 8. Touch the button INFORMATION You can search for a street name using just the body. Example : S WESTERN AVE You can input "S WESTERN AVE", "WESTERN AVE" or " - 2013 Toyota Highlander | Navigation Manual - Page 35
the button for the desired method. 4. Input the name of the Point of Interest. 5. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) When inputting the name - 2013 Toyota Highlander | Navigation Manual - Page 36
DESTINATION SEARCH D Selecting a city to search Touch the button of the desired destination. If the same name exists in more than one city, a search can be performed more easily with "City" and "Category". (See "D Selecting a city to search" on page 60 and "D Selecting from the categories" on page - 2013 Toyota Highlander | Navigation Manual - Page 37
DESTINATION SEARCH D Selecting from the categories (b) Search by "Category" The destination can be set by selecting the search point and the POI category. 1. Push the "DEST" button. 2. Touch "Point of Interest" on the "Destination" screen. 3. Touch "Category" on the "Point of Interest" screen. - 2013 Toyota Highlander | Navigation Manual - Page 38
DESTINATION SEARCH SETTING THE SEARCH POINT FROM NEAR HERE Touch "Near Here". The search point is set at the current position, and the "POI Category" screen will be displayed. (See page 64.) SETTING THE SEARCH POINT FROM ALONG MY ROUTE Touch "Along My Route". The search point is set and the "POI - 2013 Toyota Highlander | Navigation Manual - Page 39
DESTINATION SEARCH SELECTING FROM THE LAST 5 CITIES 1. Touch "Near City Center". SETTING THE SEARCH POINT FROM NEAR A DESTINATION 1. Touch "Near a Destination". 2. Touch "Last 5 Cities". 2. Touch the button of the desired destination. The search point is set and the "POI Name" screen will be - 2013 Toyota Highlander | Navigation Manual - Page 40
screen, touch "List All Categories" to list all POI categories. 4. Input a telephone number. 5. After inputting a telephone number, touch "OK". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) If there - 2013 Toyota Highlander | Navigation Manual - Page 41
number inputted, a list of identical numbers with different area codes will be displayed. D To set an previous destinations, see page 119.) The screen changes and displays the map location of the selected "Delete Previous Dest." on the "Navigation Settings" screen when the vehicle is stopped. (See - 2013 Toyota Highlander | Navigation Manual - Page 42
Touch "Emergency" on the second page of the "Destination" screen. The display changes to a screen to select police stations, dealers, hospitals or fire stations. While driving, only nearby police stations, dealers, hospitals, or fire stations are shown. The current position is shown with an address - 2013 Toyota Highlander | Navigation Manual - Page 43
the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page 333 - 2013 Toyota Highlander | Navigation Manual - Page 44
the destination to be set. 5. Touch "OK". 8. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 6. Touch the button - 2013 Toyota Highlander | Navigation Manual - Page 45
" screen. 3. Touch "Freeway Entrance/Exit" on the "Intersection & Freeway" screen. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected - 2013 Toyota Highlander | Navigation Manual - Page 46
button. 2. Touch "Map" on the second page of the "Destination" screen. 6. Either a freeway "Entrance" or "Exit" can be selected. The screen changes and displays the map location that was previously displayed just before the destination input operation and the route preference. (See "Starting route - 2013 Toyota Highlander | Navigation Manual - Page 47
Input the latitude and the longitude. 4. When the input is finished, touch "OK". By touching the button of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 3. Touch the destination - 2013 Toyota Highlander | Navigation Manual - Page 48
DESTINATION SEARCH Starting route guidance The system searches for the guidance route again, and displays the entire route. After inputting the destination, the screen changes and displays the map location of the selected destination and the route preference. INFORMATION Set destinations can also - 2013 Toyota Highlander | Navigation Manual - Page 49
the desired route from 3 possible routes. (See page 74.) "Edit Route": To change the route. (See page 75.) 1 D The route for returning may not be route nor a route without traffic congestion. D Route guidance may not be available if there is no road data for the specified location. D When setting - 2013 Toyota Highlander | Navigation Manual - Page 50
DESTINATION SEARCH 3 ROUTES SELECTION 1 1. To select the desired route from 3 routes, touch "3 Routes". 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 2. Touch "Quick", "Alt." or "Short" to select the desired route. "Quick": Recommended route. - 2013 Toyota Highlander | Navigation Manual - Page 51
in some cases. D If the calculated route includes a trip by ferry, the route guidance shows a sea route. After you travel by ferry, the current vehicle position may be incorrect. Upon reception of GPS signals, it is automatically corrected. Touch "Edit Route". "Add": To add destinations. (See page - 2013 Toyota Highlander | Navigation Manual - Page 52
DESTINATION SEARCH 76 - 2013 Toyota Highlander | Navigation Manual - Page 53
...84 Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route ...Detour setting ...Route overview ...Route preference ...Pausing and resuming guidance ...D Show on map ...84 84 85 86 86 87 89 91 92 Display POI* icons ...92 Route trace ...96 D XMr NavTraffic ...98 - 2013 Toyota Highlander | Navigation Manual - Page 54
to the destination Current position Guidance route INFORMATION D If the vehicle goes off the guidance route, the route is searched again. D For some areas, the roads have not been completely digitized in our database. For this reason, the route guidance may select road that should not be traveled - 2013 Toyota Highlander | Navigation Manual - Page 55
ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an exit or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. - 2013 Toyota Highlander | Navigation Manual - Page 56
screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching ance displays the turn list. during guid- ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays the arrow screen - 2013 Toyota Highlander | Navigation Manual - Page 57
ROUTE GUIDANCE Typical voice guidance prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.5 miles 4.7 miles 0.5 miles 1 2 1 2 3 4 "Proceed about 4 miles to the traffic circle." "In half of a mile - 2013 Toyota Highlander | Navigation Manual - Page 58
if the distance between two one−way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in non−residential areas. 1 2 3 The system announces the approach to the final destination. 1 2 "Your destination is ahead." "You have arrived at your destination - 2013 Toyota Highlander | Navigation Manual - Page 59
arrow. INFORMATION When the vehicle is on the guidance route, the distance measured along the route is displayed. Travel time and arrival time is calculated based on the set vehicle speed information. (See page 271.) However, when the vehicle is not on the guidance route, the distance is the linear - 2013 Toyota Highlander | Navigation Manual - Page 60
the arrival order of the additional destination. 3. Select the desired destination and press "Move Up" or "Move Down" to change the arrival order. 4. Touch "OK". 5. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. 84 - 2013 Toyota Highlander | Navigation Manual - Page 61
the destination(s), touch "Yes". If "Yes" is touched, the data cannot be recovered. If "No" is touched, the previous screen will return. The system searches for the guidance route again, and displays the entire route. 1. Touch "Route". 2. Touch "Delete". When more than one destination is set - 2013 Toyota Highlander | Navigation Manual - Page 62
route - - Detour setting While the route guidance is operating, you can change the route to detour around a section of the route where a delay the system will calculate an entire new route to the destination. "Around Traffic": If you touch this button, the system will search for the route based on - 2013 Toyota Highlander | Navigation Manual - Page 63
ROUTE GUIDANCE - Route overview 1. Touch "Route". This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates the - 2013 Toyota Highlander | Navigation Manual - Page 64
, not all 1. Touch "Route". road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting - 2013 Toyota Highlander | Navigation Manual - Page 65
. : To preview the route to the next destination in fast−forward mode. : To stop the preview. : To review the route to the previous destination or starting point. : To review the route to the previous destination or starting point in fast−forward mode. : To indicate the previous destination or - 2013 Toyota Highlander | Navigation Manual - Page 66
GUIDANCE D To select route features A number of choices are provided on the conditions which the system uses to determine the route to the destination. The entire route from the starting point to the destination is displayed. "OK": To start guidance. "Edit Route": To change a route. (See page 75 - 2013 Toyota Highlander | Navigation Manual - Page 67
ROUTE GUIDANCE - Pausing and resuming guidance D Starting route from adjacent road You can start the route guidance from the adjacent road. (ex. When route guidance is set on the freeway, but the vehicle is driven parallel along the freeway.) D To pause guidance 1. Touch "Route". 1. Touch "Route - 2013 Toyota Highlander | Navigation Manual - Page 68
destination and use them for route guidance. 1. Touch "Route". 1. Touch "Show on Map". 2. Touch "Resume Guidance". 2. Touch "Select POI" to display on the map screen have already been set, "Change POI" is displayed. The screen will change to the current position map with route guidance. A - 2013 Toyota Highlander | Navigation Manual - Page 69
, touch this button. "Find Local POI": When searching for the nearest Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 20 miles (32 km). (See page 94.) Select the desired POI categories. The selected category icon appears on the top - 2013 Toyota Highlander | Navigation Manual - Page 70
ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 20 miles (32 km) of the current position will be listed from among the selected categories. Select the desired POI categories from the list. The selected category icon appears on the top left of the screen. By - 2013 Toyota Highlander | Navigation Manual - Page 71
as a straight line from the current vehicle position to the POI. 2. When the desired Point of Interest overlaps with the cursor, touch "Enter ". The screen changes and displays the map location of the selected destination and route preference. (See "Starting route guidance" on page 72.) 95 - 2013 Toyota Highlander | Navigation Manual - Page 72
traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 miles (50 km). 1. Touch "Show on Map". 2. Touch "POI Icons". The "POI Icons" indicator is dimmed. The map screen will be displayed - 2013 Toyota Highlander | Navigation Manual - Page 73
ROUTE GUIDANCE D To start recording the route trace D To stop recording the route trace 1. Touch "Show on Map". 1. Touch "Show on Map". 2. Touch "Route Trace". "Route Trace" indicator is highlighted. 2. Touch "Route Trace". The following screen will be displayed. Touching "Yes" stops - 2013 Toyota Highlander | Navigation Manual - Page 74
ROUTE GUIDANCE XMr NavTraffic The XMr NavTraffic service that allows the navigation system to display traffic information on the map is available if your satellite radio tuner can receive traffic information. To receive the XMr NavTraffic service, a subscription to the XMr Satellite Radio with - 2013 Toyota Highlander | Navigation Manual - Page 75
ROUTE GUIDANCE D Show XMr NavTraffic information XMr NavTraffic information is displayed on the map. 1. Touch "Show on Map". " On Map screen 2. Touch "Traffic Information". "Traffic Information" indicator is highlighted. " On Freeway information screen 99 - 2013 Toyota Highlander | Navigation Manual - Page 76
indicator When any XMr NavTraffic information has been received, the XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. "White": Traffic information has been received. "Yellow": Traffic restriction information on the - 2013 Toyota Highlander | Navigation Manual - Page 77
MY PLACES SECTION MY PLACES D Navigation settings ...Setting up the "Home" ...Setting up the "Preset Destinations" ...Setting up the "Address Book" ...Setting up the "Areas to Avoid" ...Deleting previous destinations ... 4 102 103 105 108 114 119 101 - 2013 Toyota Highlander | Navigation Manual - Page 78
2 3 4 Function Sets home (See page 103.) Sets preset destinations (See page 105.) Sets address book (See page 108.) Sets area to avoid (See page 114.) Deletes previous destinations (See page 119.) Detailed navigation settings (See page 269.) 1. Push the "SETUP" button. 5 6 2. Touch "Navi.". 102 - 2013 Toyota Highlander | Navigation Manual - Page 79
." on the "Setup" screen. (a) Registering home 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Home" on the "Navigation Settings" screen. 4. Touch "Set Home". 3. Touch "Home". D Registering home (See page 103.) D Editing home (See page 104.) D Deleting home (See page - 2013 Toyota Highlander | Navigation Manual - Page 80
Touch "Navi." on the "Setup" screen. 3. Touch "Home" on the "Navigation Settings" screen. 6. Touch "OK". To edit registered information, see "(b) Editing home 104. 4. Touch "Edit". 5. Touch "Edit" for the item you want to change. "Name": To edit home name. The names can be displayed on the map. - 2013 Toyota Highlander | Navigation Manual - Page 81
up the "Preset Destinations" (c) Deleting home 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Home" on the "Navigation Settings" screen. If preset destination has been registered, that information can be recalled by using the "Preset Destination" touch screen button on - 2013 Toyota Highlander | Navigation Manual - Page 82
Registering preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. When registration of preset destination is completed, the "Edit Preset Destination" screen will be displayed. 7. Touch "OK". To - 2013 Toyota Highlander | Navigation Manual - Page 83
1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. 4. Touch "Edit". 6. Touch "Edit" for the item you want to change. "Name": To edit preset destination names. The names can be displayed on the map. (See page 112 - 2013 Toyota Highlander | Navigation Manual - Page 84
Deleting preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. Points or areas on the map can be registered. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address - 2013 Toyota Highlander | Navigation Manual - Page 85
(a) Registering address book entries 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "OK". To edit registered information, see "(b) Editing address book entries" on page 110. INFORMATION 4. Touch "New". Up to - 2013 Toyota Highlander | Navigation Manual - Page 86
can be edited. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit address book entry names. The names can be displayed on the map. (See page 112.) "Location - 2013 Toyota Highlander | Navigation Manual - Page 87
Touch "Edit" of "Icon". 2. Touch the desired sound icon. The next screen appears when "Bell (with Direction)" is touched. 2. Touch the desired icon. Change pages by touching "Page 1", "Page 2" or "With Sound" tab. Touch either or to adjust the direction. Touch "OK". The bell sounds only when - 2013 Toyota Highlander | Navigation Manual - Page 88
MY PLACES D To change "Name" DISPLAYING MEMORY POINT NAMES The name of an address book entry can be set to display on the map. 1. Touch "Edit" of "Name". To show the name, touch "On" on the "Edit Address Book Entry" screen. To not show it, touch "Off". 2. Enter the name using the alphanumeric - 2013 Toyota Highlander | Navigation Manual - Page 89
MY PLACES D To change "Location" D To change "Phone #" (telephone number) 1. Touch "Edit" of "Location". 1. Touch "Edit" of "Phone #". 2. Touch one of the 8 directional touch screen buttons to move the cursor to the - 2013 Toyota Highlander | Navigation Manual - Page 90
" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen - 2013 Toyota Highlander | Navigation Manual - Page 91
2. Touch "Navi." on the "Setup" screen. 3. Touch "Areas to Avoid" on the "Navigation Settings" screen. 6. Scroll the map to the desired point. display the map of the area to be avoided. (See "Destination search" on page 52.) 8. Touch either or to change the size of the area to be avoided. 9. Touch - 2013 Toyota Highlander | Navigation Manual - Page 92
to Avoid" on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit the name of the area to avoid. The names can be displayed on the map. (See page 117.) "Location": To edit area location. (See page 118.) "Size": To edit area size. (See page 118.) "Active - 2013 Toyota Highlander | Navigation Manual - Page 93
MY PLACES D To change "Name" DISPLAYING NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be set. 1. Touch "Edit" of "Name". To show the name, touch "On" on the "Area to Avoid" screen. To not show it, touch "Off". 2. Enter the name using - 2013 Toyota Highlander | Navigation Manual - Page 94
"Edit" of "Location". 1. Touch "Edit" of "Size". 2. Touch the 8 directional touch to screen button to move the cursor the desired point on the map. 3. Touch "OK". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous - 2013 Toyota Highlander | Navigation Manual - Page 95
the "Navigation Settings" screen. The previous destination can be deleted. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Delete Previous Dest.". 4. Touch "Delete". 5. Touch the button to be deleted. "Select All": To select all registered areas to avoid in the system - 2013 Toyota Highlander | Navigation Manual - Page 96
MY PLACES 6. To delete the destination, touch "Yes". To cancel the deletion, touch "No". 120 - 2013 Toyota Highlander | Navigation Manual - Page 97
TELEPHONE AND INFORMATION SECTION TELEPHONE AND INFORMATION D Telephone (Hands−free system for cellular phone) ...Enter a Bluetoothr phone ...Call on the Bluetoothr phone ...Receive on the Bluetoothr phone ...Talk on the Bluetoothr phone ...D Calendar ... 5 122 127 132 139 140 143 121 - 2013 Toyota Highlander | Navigation Manual - Page 98
D In the following conditions, the system may not function. D The cellular phone is turned off. D The current position is outside the communication area. D The cellular phone is not connected. D The cellular phone has a low battery. D Even if your cellular phone supports both hands−free and audio - 2013 Toyota Highlander | Navigation Manual - Page 99
Access Profile) Ver.1.0 If your cellular phone does not support HFP, you cannot enter the Bluetoothr phone, and take OPP or PBAP service individually. Please go to "http://www.toyota.com/ bluetooth" to find approved Bluetoothr phones for this system. You can use the microphone above when talking on - 2013 Toyota Highlander | Navigation Manual - Page 100
road. (Making a traffic noise.) D Driving at the high speed. D The window is open. D Turning the air− system doesn't have a charging function. 3 Indicates the receiving area. "Rm" is displayed when receiving in Roaming area. "Hm" is displayed when receiving in Home area. The receiving area - 2013 Toyota Highlander | Navigation Manual - Page 101
of the service area or in a place inaccessible by radio waves, "No Service" is seat or in the glove box and console box). D Your cellular phone touches or is covered with metal materials. Leave the Bluetoothr phone on the place where "Blue" indication is displayed. About the phonebook in this system - 2013 Toyota Highlander | Navigation Manual - Page 102
operated with at least 20 cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and ankles). Co−location : This any other antenna or transmitter. The antenna cannot be removed (and changed) by user. Operation is subject to the following two conditions; (1) - 2013 Toyota Highlander | Navigation Manual - Page 103
TELEPHONE AND INFORMATION - Enter a Bluetoothr phone CAUTION Cet équipement est conforme aux limitations sur l'exposition aux radiations IC définies pour un équipement non contrôlé et est conforme avec les directives sur RSS−102 des règles sur l'exposition aux fréquences radio (RF). Cet équipement - 2013 Toyota Highlander | Navigation Manual - Page 104
same one. 4. When this screen is displayed, input the passcode displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". When this screen is displayed, follow the guidance on the screen - 2013 Toyota Highlander | Navigation Manual - Page 105
When you register your phone, auto connection will be turned on. Always set it to this mode and leave the Bluetoothr phone in a condition where connection can be established. Vehicles with smart key system- When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, a nearby - 2013 Toyota Highlander | Navigation Manual - Page 106
take time, the phone connection is carried out during Bluetoothr audio play. MANUALLY When the auto connection has failed or "Handsfree power" is turned off, you have to connect Bluetoothr manually. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Connect Phone". 4. Touch "Handsfree - 2013 Toyota Highlander | Navigation Manual - Page 107
When you connect the phone while Bluetoothr audio is playing 5. The "Connect Bluetooth*" screen is displayed. This screen is displayed, and the Bluetoothr audio will stop temporarily. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 6. When the connection is completed, this screen is - 2013 Toyota Highlander | Navigation Manual - Page 108
- If the Bluetoothr phone is disconnected with poor reception from the Bluetoothr network; when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the system automatically reconnects the Bluetoothr phone. In this case, the connection result is not displayed. Vehicles without smart - 2013 Toyota Highlander | Navigation Manual - Page 109
TELEPHONE AND INFORMATION D By phonebook You can call by phonebook data which is transferred from your cellular phone. The system has one phonebook for each telephone. You can register up to 1000 numbers in total of phonebooks. This cannot be operated while driving. 3. Touch the - 2013 Toyota Highlander | Navigation Manual - Page 110
TELEPHONE AND INFORMATION When the phonebook is empty 3. Select the desired number from the list. Touch wheel. or push on the steering 1. Touch "Contacts". 2. Touch "Yes" if you want to transfer new contacts from a cellular phone. Touch "No" if you want to edit the phonebook. 134 - 2013 Toyota Highlander | Navigation Manual - Page 111
the latest 5 call history items shown by "All" while driving. 1. Touch "Speed Dials". 1. Touch "Call History". 2. Touch the desired number to call. You can change the page by touching "Speed Dial 2" or "Speed Dial 3" tab. 2. Select the desired data from the list. To switch the list, touch "All - 2013 Toyota Highlander | Navigation Manual - Page 112
registered. D When a phone number registered in the phonebook is received, the name and the number are displayed. D Number−withheld calls are also memorized in the system. D A international phone call may not be made depending on the cellular phone which you have. 136 - 2013 Toyota Highlander | Navigation Manual - Page 113
the phonebook data" on page 292. You can call by giving a command. (For the operation and command of voice recognition, see "Speech command system" on page 44.) This can be operated while driving. The "Dial by Name" operating procedure is explained here. Other operating procedures are also similar - 2013 Toyota Highlander | Navigation Manual - Page 114
the talk switch. "After the beep, please say a command." "Such as "Go Home", "Destination", "Phone", "Audio" or "Command List"." "(beep)" You: "Phone." System: "Phone." "Say a command." "Such as "Dial by Number", "Dial by Name", "Redial", "Call Back" or "Connect Phone"." "(beep)" You: "Dial by Name - 2013 Toyota Highlander | Navigation Manual - Page 115
AND INFORMATION - Receive on the Bluetoothr phone D By POI* call You can call by touching when it is displayed on the screen from navigation system. (See "POI INFORMATION" on page 36 for details.) *: Point of Interest When a call is received, this screen is or displayed with a sound. Touch - 2013 Toyota Highlander | Navigation Manual - Page 116
. When you change from cellular phone call to Hands−free call, the Hands−free screen will be displayed and you can operate it on the screen. Transferring method and behavior are different depending on the cellular phone which you have. For the operation of the phone, see the manual that comes with - 2013 Toyota Highlander | Navigation Manual - Page 117
056133w0123p#1:) You can do this operation when you want to operate an answering machine or use a telephone service in a bank for example. You can register the phone number and the code number in the phonebook . (For the operation of voice recognition, see "Speech command system" on page 44.) 141 - 2013 Toyota Highlander | Navigation Manual - Page 118
TELEPHONE AND INFORMATION D Interrupt call When the call is interrupted by the third party while talking, this screen is displayed. or push on the steering Touch wheel to start talking with the other party. Touch or push on the steering wheel to refuse the call. Everytime you touch or push on the - 2013 Toyota Highlander | Navigation Manual - Page 119
INFORMATION Calendar To view calendar. 1. Push the "INFO/PHONE" button. 2. Touch "Calendar". On this screen, the current date is highlighted in yellow. or or : To change month. : To change year. "Today": To display the current month calendar (if another month's is being displayed). 143 - 2013 Toyota Highlander | Navigation Manual - Page 120
TELEPHONE AND INFORMATION 144 - 2013 Toyota Highlander | Navigation Manual - Page 121
) ...Using the DVD player (video CD) ...Using the DVD player (audio CD/CD text) ...Using the DVD player (MP3 discs) ...Using the video mode ...Changing the initial setting ...Replacing the batteries ...D Audio/video system operating hints ... D Rear seat entertainment system features ...221 145 - 2013 Toyota Highlander | Navigation Manual - Page 122
AUDIO/VIDEO SYSTEM Quick reference Operations such as selecting a preset station and adjusting the sound balance are carried out on the touch screen. To display the audio screen, push the "TUNE/FILE"/"AUDIO" knob. 1 2 Function menu display screen To control the radio, CD changer, DVD player*, - 2013 Toyota Highlander | Navigation Manual - Page 123
161. 8 "DISC·AUX" button Push this button to turn the Bluetoothr audio player, AUX, USB memory/iPod, CD changer or DVD player* on. For details, see pages 149, 155, 169, 184 and 189. *: Vehicles with rear seat entertainment system 9 "FM 1·2" button Push this button to choose an FM station. Each time - 2013 Toyota Highlander | Navigation Manual - Page 124
the switch above, you can operate the speech command system. For the operation of the speech command system and the list of commands, see pages 44 and 47. NOTICE To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. 148 - 2013 Toyota Highlander | Navigation Manual - Page 125
Push the "TUNE/FILE"/"AUDIO" knob and touch the "AM", "FM", "SAT", "CD", "DVD*", "BT", "AUX" or "USB" tab to turn on the desired mode. *: Vehicles with rear seat entertainment system "PWR/VOL": Push this knob to turn the audio/video system on and off. Turn this knob to adjust the volume. The - 2013 Toyota Highlander | Navigation Manual - Page 126
changer/DVD player* by ejecting all the discs. If the audio system was previously off, then the entire audio system will be turned off when you eject all the discs. If the other function was previously playing, it will come on again. *: Vehicles with rear seat entertainment system U6081GS U6080GS - 2013 Toyota Highlander | Navigation Manual - Page 127
, CD changer, DVD player*, Bluetoothr audio player, AUX and USB memory/ iPod, operation are displayed on the function touch−screen button display screen when the audio control mode is selected. Touch them lightly and directly on the screen. *: Vehicles with rear seat entertainment system Touch the - 2013 Toyota Highlander | Navigation Manual - Page 128
AUDIO/VIDEO SYSTEM (d) DSP that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of difficult to hear due to road noise, wind noise or other noises while driving, select "On". The system adjusts to the optimum volume and - 2013 Toyota Highlander | Navigation Manual - Page 129
AUDIO/VIDEO SYSTEM (f) Selecting screen size (with rear seat entertainment system) 1. Push the "TUNE/FILE"/"AUDIO" knob and touch "DVD" tab. U6007GS 1. Touch "Sound" tab to display this screen. 2. Touch the desired button. "Treble" "+" or "-": Adjust high−pitched tones. "Mid" "+" or "-": Adjust - 2013 Toyota Highlander | Navigation Manual - Page 130
AUDIO/VIDEO SYSTEM U6009GS 4. Touch the desired button. "Normal": Displays a 3 : 4 screen, with either side in black. "Wide 1": Widens the 3 : 4 screen horizontally to fill the screen. "Wide 2": Widens the 3 : 4 screen vertically and horizontally, in the same ratio, to fill the screen. When - 2013 Toyota Highlander | Navigation Manual - Page 131
AUDIO/VIDEO SYSTEM - Radio operation (h) Your DVD player (with rear seat entertainment system) The sound of the rear seat entertainment system can be enjoyed by pushing the "DISC·AUX" button or touching the "DVD" tab on AUDIO screen. (i) AUX port The sound of portable audio players connected to the - 2013 Toyota Highlander | Navigation Manual - Page 132
AUDIO/VIDEO SYSTEM U6080GS (b) Presetting , FM1 or FM2) can store up to 6 stations. To change the preset station to a different one, follow the same procedure. amount of channel separation to prevent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from - 2013 Toyota Highlander | Navigation Manual - Page 133
a station, touch "SCAN" again. (d) Radio Data System Your audio system is equipped with Radio Data Systems (RDS). RDS mode provides you to receive text messages from search for a stronger signal station. RDS features are available for use only on FM stations which broadcast RDS information. 157 - 2013 Toyota Highlander | Navigation Manual - Page 134
AUDIO/VIDEO SYSTEM U6080GS "Type A "" Each time you touch "A Type " or "Type "", the program type changes as in the following: D ROCK D MISC ( a program is set, "Type Seek" appears. Touch the switch and the system starts to seek the station in the relevant program type. If any type program - 2013 Toyota Highlander | Navigation Manual - Page 135
(e) Traffic announcement U6090GSF "Message" If the system receives a radio text from RDS station, "MSG" appears on the display. Touch "Message", and a text message is displayed on the screen. This function is available only when the vehicle is not moving. When you touch "Message Off", the display - 2013 Toyota Highlander | Navigation Manual - Page 136
service subscription fees apply that are not included in the purchase price of the vehicle and optional digital satellite tuner. For complete information on subscription rates subject to change. Satellite tuner radio ID when activating XMr service or when reporting a problem. If you select the "CH - 2013 Toyota Highlander | Navigation Manual - Page 137
AUDIO/VIDEO SYSTEM (c) Listening to satellite radio (d) Channel category U6082GS Touch either "A Type" or "Type "" to go to the next or previous category. Push the "SAT" button or - 2013 Toyota Highlander | Navigation Manual - Page 138
AUDIO/VIDEO SYSTEM (e) Presetting a channel 1. Tune in the desired channel. U6082GS 2. Touch one of appears on the touch− screen button. Each touch−screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is - 2013 Toyota Highlander | Navigation Manual - Page 139
AUDIO/VIDEO SYSTEM (g) Displaying the title and name U6092GS When you touch "Text", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "Text" again, the display returns. - 2013 Toyota Highlander | Navigation Manual - Page 140
the channel at that time. No action needed. The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. Care Center at 1−800−967−2346 (U.S.A.) or NO SIGNAL LOADING - 2013 Toyota Highlander | Navigation Manual - Page 141
SYSTEM NOTICE This equipment has been tested and used in accordance with the instructions, may cause harmful interference to radio receiver is connected. -Consult the dealer or an experienced radio/TV technician for equipment. INFORMATION This XMr tuner supports "Audio Services" (Music and Talk) of - 2013 Toyota Highlander | Navigation Manual - Page 142
smart key system- The "ENGINE START STOP" switch must be in ACCESSORY or IGNITION ON mode. Vehicles without smart key system- The engine switch at either side of the slot start blinking again. When the indicators change to green, you can insert the next disc. / CLOSE" but4 The display opens. 166 - 2013 Toyota Highlander | Navigation Manual - Page 143
SYSTEM CAUTION D Do not place anything on the opened display, as such items may be thrown about and possibly injure people in the vehicle during sudden braking display opens and the amber indicators at either side of the slot start blinking. After the disc is ejected, the amber indicators change to - 2013 Toyota Highlander | Navigation Manual - Page 144
are removed, the amber indicators change to green. A disc can be inserted. 1. Push the "LOAD· / CLOSE" button. The "Load·Eject" screen appears. U6018GS The numbers of the trays where the disc is not set are dimmed. U6020GS 2. Touch "Eject All". The display opens and the amber indicators at either - 2013 Toyota Highlander | Navigation Manual - Page 145
. When play of the final disc ends, play of the first disc starts again. The changer will skip any empty disc trays. Vehicles with rear seat entertainment system - If the DVD player is turned on, push the "DISC·AUX" button again or touch "CD" tab to switch to the CD changer. If the rear - 2013 Toyota Highlander | Navigation Manual - Page 146
AUDIO/VIDEO SYSTEM (e) Playing an audio disc U6093GS Push the "TUNE/FILE"/"AUDIO" knob and touch the "CD" tab, then touch the "Change Discs". Choose an audio disc number to from a list. This function is available only when the vehicle is not moving. Touch "Select". The track list is displayed. - 2013 Toyota Highlander | Navigation Manual - Page 147
AUDIO/VIDEO SYSTEM U6093GS Touch the desired track number. The changer will start playing the selected track from the beginning. : By touching this touch−screen button, the list - 2013 Toyota Highlander | Navigation Manual - Page 148
briefly while the disc is playing. "RAND" appears on the screen. The system selects a track on the disc being listened to in random order. To cancel a second while the disc is playing. "D.RAND" appears on the screen. The system selects a track on all the audio discs in the changer in random order. - 2013 Toyota Highlander | Navigation Manual - Page 149
SYSTEM (f) Playing a MP3/WMA disc SELECTING A DESIRED FOLDER U6095GS Push the "TUNE/FILE"/"AUDIO" knob and touch the "CD" tab, then touch the "Change : The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The folder list - 2013 Toyota Highlander | Navigation Manual - Page 150
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of the "SEEK/TRACK" button and repeat it until - 2013 Toyota Highlander | Navigation Manual - Page 151
AUDIO/VIDEO SYSTEM U6095GS "Select" for File: The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file list is displayed. U6027GS Touch the desired file number. The changer will start playing - 2013 Toyota Highlander | Navigation Manual - Page 152
AUDIO/VIDEO SYSTEM U6096GS SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen briefly while the disc is playing. "SCAN" appears on the screen. The changer will play - 2013 Toyota Highlander | Navigation Manual - Page 153
listening to. Playing the files in one folder in random order - Touch "RAND" briefly while the disc is playing. "RAND" appears on the screen. The system selects a file in the folder you are currently listening to. To cancel it, touch "RAND" once again. Playing the files in all the folders on - 2013 Toyota Highlander | Navigation Manual - Page 154
If the changer still does not operate, have it checked by your dealer. If an MP3/WMA disc contains CD−DA files, only CD− system enables users to enjoy music played on a portable player from the vehicle speaker via wireless communication. This audio system supports Bluetoothr, a wireless data system - 2013 Toyota Highlander | Navigation Manual - Page 155
owned by Bluetooth SIG, Inc. Do not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player. INFORMATION D In the following conditions, the system may not function. D The portable player is turned off. D The portable player is not - 2013 Toyota Highlander | Navigation Manual - Page 156
turn yellow and the system may not function when you use the Bluetoothr portable player in the following conditions. D Your portable player is hiding behind from the display (behind the seat or in the glove box or console box). D Your portable player touches or is covered with metal materials. Leave - 2013 Toyota Highlander | Navigation Manual - Page 157
AUDIO/VIDEO SYSTEM D For at least 20 cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and ankles). Co−location other antenna or transmitter. The antenna cannot be removed (and changed) by user. Operation is subject to the following two conditions - 2013 Toyota Highlander | Navigation Manual - Page 158
AUDIO/VIDEO SYSTEM CAUTION Cet équipement est conforme aux limitations sur l'exposition aux radiations IC définies pour un équipement non contrôlé et est conforme avec les directives sur - 2013 Toyota Highlander | Navigation Manual - Page 159
D When the connection method is "From Portable Player" Operate the portable player and connect it to the Bluetoothr audio system. For the operation procedure for the portable player, see the instruction manual that comes with it. Touch "Connect". U6033GS Touch "Connect". When the connection - 2013 Toyota Highlander | Navigation Manual - Page 160
the Bluetoothr network when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the system automatically reconnects the portable player. In this case, the connection result is not displayed. Vehicles without smart key system- If the portable player is disconnected with poor reception - 2013 Toyota Highlander | Navigation Manual - Page 161
resume playing from that position. Reverse: Push and hold the " " button of "SEEK/ TRACK" to reverse the player. When you release the button, the player will resume playing. INFORMATION Depending on the portable player that is connected to the system, certain functions may not be available. 185 - 2013 Toyota Highlander | Navigation Manual - Page 162
next album. "Album B": Touch this button to go to the previous album. INFORMATION Depending on the portable player that is connected to the system, certain functions may not be available. "RPT": Use this control to automatic replay the track you are currently listening to. Repeating a track- While - 2013 Toyota Highlander | Navigation Manual - Page 163
when a disc is loaded in the DVD player. A WMA and DVD audio disc cannot be played. For details of the rear seat entertainment system, see "Rear seat entertainment system features" on page 221. For appropriate discs for this player, see "Audio/video system operating hints" on page 242. (a) Inserting - 2013 Toyota Highlander | Navigation Manual - Page 164
AUDIO/VIDEO SYSTEM (b) Ejecting a disc The indicator light turns on while the disc is loaded. appropriate discs for this player, see "Audio/video system operating hints" on page 242. Push the " " button. NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert anything - 2013 Toyota Highlander | Navigation Manual - Page 165
SYSTEM (c) Playing a disc (d) Operating an audio CD U6102GS PLAYING AN AUDIO CD CD text only - The disc title and track title will appear on the screen when pushing the "DISC·AUX" button. Push the "TUNE/FILE"/"AUDIO" knob and touch the "DVD "DVD" tab if a disc is already loaded in the player. "DVD - 2013 Toyota Highlander | Navigation Manual - Page 166
AUDIO/VIDEO SYSTEM U6041GS Touch the desired track number. The player will start playing the selected track from the button, the player will start playing the selected track from the beginning. "Select" for track: The desired track can be selected from a list. This function is available only when - 2013 Toyota Highlander | Navigation Manual - Page 167
AUDIO/VIDEO SYSTEM U6103GS SEARCHING FOR A DESIRED TRACK Touch "SCAN" on the screen. "SCAN" will be highlighted on the screen. The player will play the next track for 10 seconds, then scan again. To select a track, touch "SCAN" on the screen a second time. If the player reaches the end of the disc, - 2013 Toyota Highlander | Navigation Manual - Page 168
SYSTEM (e) Operating a MP3 DISC U6105GS PLAYING A MP3 DISC Push the "TUNE/FILE"/"AUDIO" knob and touch the "DVD" tab to display this screen. SELECTING A DESIRED FOLDER U6045GS Touch the desired folder number. The player is available only when the vehicle is not moving. Touch "Select". The - 2013 Toyota Highlander | Navigation Manual - Page 169
of the "SEEK/ TRACK" button and hold it to reverse the disc. When you release the button, the player will resume playing. "Select" for File: The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file list is displayed. 193 - 2013 Toyota Highlander | Navigation Manual - Page 170
AUDIO/VIDEO SYSTEM U6046GS Touch the desired file number. The player will start playing the selected file from FOR A DESIRED FILE Touch "SCAN" on the screen briefly. "SCAN" appears on the screen. The DVD player will play the next file in the folder for 10 seconds, then scan again. To select a file, - 2013 Toyota Highlander | Navigation Manual - Page 171
AUDIO/VIDEO SYSTEM U6107GS SEARCHING FOR A DESIRED FOLDER Touch and hold "SCAN" on the screen until the beep sounds. "FLD.SCAN" appears on the screen. The DVD player will play the file at the beginning of each folder for 10 seconds, then scan again. To select a file, touch "SCAN" on the screen a - 2013 Toyota Highlander | Navigation Manual - Page 172
" appears on the screen. The system selects a file in the folder instruction manual for the DVD video disc separately provided. For the detailed information about DVD video discs, see "(i) DVD player and DVD video disc information" on page 230. Precautions on DVD video disc When recording with a DVD - 2013 Toyota Highlander | Navigation Manual - Page 173
a significant impact on the human body or pose a driving hazard. Keep this in mind when you adjust the volume. U6077GS Vehicles with smart key system- This screen appears when the video screen is first displayed after "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode. Vehicles without - 2013 Toyota Highlander | Navigation Manual - Page 174
TUNE/FILE"/"AUDIO" knob and touch the "DVD" tab to display this screen. Touch "Settings" on "DVD" screen and touch "Wide" on "Settings" screen. The screen mode can be changed. If you touch "Full Screen" when the vehicle is completely stopped and the parking brake is applied, the video screen returns - 2013 Toyota Highlander | Navigation Manual - Page 175
/VIDEO SYSTEM DESCRIPTION OF SETTINGS "DVD Video Settings": The initial set up screen appears. (See page 203.) "Search": The title search screen appears. (See page 201.) "Return": Touching this will display the predetermined scene and start playing from there. "Audio": The audio changing screen - 2013 Toyota Highlander | Navigation Manual - Page 176
SYSTEM DESCRIPTION OF DVD CONTROLS "Menu" and "Top Menu": If you touch any of the above controls, the menu screen for DVD video appears. (For the operation, see the manual that come with the DVD The player starts playing video for that menu item. (For details, see the manual that come with the DVD - 2013 Toyota Highlander | Navigation Manual - Page 177
and touch "OK". The player starts playing video for that title number. When you push either side of the "SEEK/ TRACK" button, you can select a chapter. If you enter the wrong numbers, touch to delete the numbers. When you touch screen returns. , the previous CHANGING THE SUBTITLE LANGUAGE Each time - 2013 Toyota Highlander | Navigation Manual - Page 178
AUDIO/VIDEO SYSTEM U6069GSb CHANGING THE AUDIO LANGUAGE Each time you touch "Change", the language is selected from the ones stored in the discs and changed. When you touch screen returns. , the previous U6076GS CHANGING THE ANGLE The angle can be selected for discs that are multi−angle compatible - 2013 Toyota Highlander | Navigation Manual - Page 179
AUDIO/VIDEO SYSTEM D Audio language You can change the audio language. 1. Touch "Audio Language". 2. SETUP MENU There are initial setting touch−screen buttons on the "Setup Menu" screen. After you change the initial setting, touch . The initial setting screen will be turned off and return to the - 2013 Toyota Highlander | Navigation Manual - Page 180
AUDIO/VIDEO SYSTEM D Angle mark The multi−angle mark can be turned on or the angle mark on the screen turns on or off alternately. D Parental lock The level of viewer restrictions can be changed. 1. Touch "Parental Lock". 2. Enter the 4−digit personal code on the "Key code" screen. If you enter - 2013 Toyota Highlander | Navigation Manual - Page 181
AUDIO/VIDEO SYSTEM 0106 0113 0118 0119 0125 0126 0201 0205 0207 0208 0209 0214 0215 0218 0301 0315 0319 0325 0401 0426 0515 0520 0521 0601 0609 - 2013 Toyota Highlander | Navigation Manual - Page 182
AUDIO/VIDEO SYSTEM 1315 1318 1319 1320 1325 1401 1405 1415 1503 1513 1518 1601 1612 1619 1721 1813 1814 1815 1823 1901 1904 1907 1908 1909 1911 - 2013 Toyota Highlander | Navigation Manual - Page 183
the rear passenger can cancel the setup operation from the front seat. To lock the operation of the player from the rear seat, see "D Rear system lock" on page 262. U6110GS PLAYING A VIDEO CD Push the "TUNE/FILE"/"AUDIO" knob and touch the "DVD" tab to display this screen. When you touch "Wide" on - 2013 Toyota Highlander | Navigation Manual - Page 184
AUDIO/VIDEO SYSTEM U6062GS DISPLAYING VIDEO CD SETTINGS If you touch "Settings" on "DVD" screen, "Settings" screen appears. touch this while the player is playing video, the next track is searched and played. "Main/Sub": A multiplex transmission changing control. The mode changes from Main/Sub to - 2013 Toyota Highlander | Navigation Manual - Page 185
AUDIO/VIDEO SYSTEM DISPLAYING VIDEO CD CONTROLS If you touch the part where controls are not located while you are watching video on the video CD, video CD - 2013 Toyota Highlander | Navigation Manual - Page 186
" will also appear on the screen. For appropriate discs for this player, see "Audio/video system operating hints" on page 242. If "Region code error" appears on the display: It indicates that the DVD region code is not set properly. If "DVD error" appears on the display: It indicates that the inside - 2013 Toyota Highlander | Navigation Manual - Page 187
player in the car. In particular, high temperatures inside the vehicle may damage the portable player. D Do not push down on or apply unnecessary pressure to the portable player the portable player or its terminal. " Vehicles with seat heater " Vehicles without seat heater Open the cover and connect - 2013 Toyota Highlander | Navigation Manual - Page 188
SYSTEM (b) Playing a USB memory or iPod D Playing and pausing a file or track INFORMATION D When an iPod is connected and the audio source is changed the same device is removed and reinserted (and the contents have not been changed), the USB memory will resume play from the same point in which it - 2013 Toyota Highlander | Navigation Manual - Page 189
AUDIO/VIDEO SYSTEM D Selecting a desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The Select the desired play mode. Touch the desired folder number. The player will start playing the first file of the selected folder. : By - 2013 Toyota Highlander | Navigation Manual - Page 190
AUDIO/VIDEO SYSTEM D Selecting a desired file or track : By touching this touch−screen Push and hold the " " side of the "SEEK/ TRACK" button to fast forward the player. When you release the button, the player will resume playing from that position. Reverse: Push and hold the " " side of the " - 2013 Toyota Highlander | Navigation Manual - Page 191
" knob to step up or down all the files or tracks in the player you are currently listening to. U6079GS " iPod "Select" for File or Track: The desired file or track can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file or - 2013 Toyota Highlander | Navigation Manual - Page 192
AUDIO/VIDEO SYSTEM D Searching for a desired file (USB memory only) U6111GS Touch the desired . Touch "SCAN" on the screen briefly while the music is playing. "SCAN" appears on the screen. The player will play the next file for 10 seconds, then scan again. To select a file, touch "SCAN" on the screen - 2013 Toyota Highlander | Navigation Manual - Page 193
AUDIO/VIDEO SYSTEM D Searching for a desired folder (USB memory only) D Other functions U6112GS Touch "SCAN" on the screen RPT" briefly. "RPT" appears on the screen. When the file or track is finished, the player will automatically play it again. To cancel the repeat, select "RPT" once again. 217 - 2013 Toyota Highlander | Navigation Manual - Page 194
is inoperative, select "RAND" to reset. Some parts of the audio system can be adjusted using the switches on the steering wheel. Details of the specific switches, controls, and features are described below. 1 Volume control switch 2 " " switch 3 "MODE" switch Volume control switch Push "+" side - 2013 Toyota Highlander | Navigation Manual - Page 195
AUDIO/VIDEO SYSTEM 2 " switch " Radio This switch has the following features- To select a preset station: Quickly push rear seat entertainment system - DVD player While the DVD player is in operation, the chapter or track can be changed by pushing the " " or " " switch. Bluetoothr audio player Use - 2013 Toyota Highlander | Navigation Manual - Page 196
AUDIO/VIDEO SYSTEM 3 "MODE" switch Push "MODE" switch to select an audio mode. Each push changes the mode sequentially if the desired mode is ready to use. To turn the audio/video system on, push the "MODE" switch. To turn the audio/video system off, push and hold the "MODE" switch until you hear a - 2013 Toyota Highlander | Navigation Manual - Page 197
AUDIO/VIDEO SYSTEM Rear seat entertainment system features - The rear seat entertainment system is designed for the rear passengers to enjoy audio and DVD video separately from the front audio system. 1 2 3 4 Front audio system Display Headphone volume control dials and headphone jacks DVD player - 2013 Toyota Highlander | Navigation Manual - Page 198
smart key system - The rear seat entertainment system can be used when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode. Vehicles without smart key system - The rear seat entertainment system can be used when the engine switch is in "ACC" or "ON" position. D Opening and closing - 2013 Toyota Highlander | Navigation Manual - Page 199
AUDIO/VIDEO SYSTEM D Loading a disc D Ejecting a disc Insert the disc into the slot with the label side up. The "DISC" indicator light turns on while the disc is loaded. The player will play the track or chapter, and will repeat it after it reaches the end. Push and remove the disc. 223 - 2013 Toyota Highlander | Navigation Manual - Page 200
AUDIO/VIDEO SYSTEM D Headphone jacks remote controller. D Headphones With some headphones generally available in the market, it may be difficult to the use of Toyota genuine wireless headphones. Please contact your Toyota dealer for further details. D Volume Adjust the volume when you connect - 2013 Toyota Highlander | Navigation Manual - Page 201
seat entertainment system is not used Keep the display closed. In the event of an accident or sudden braking, the opened display may hit an occupant's body, on the remote controller. D DVD player Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc - 2013 Toyota Highlander | Navigation Manual - Page 202
AUDIO/VIDEO SYSTEM - Using the DVD player (DVD video) D Remote controller 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Turning on the DVD mode Turning on or off the operation switches on the display Selecting a chapter Reversing a disc Turning on the menu screen Turning on the title selection - 2013 Toyota Highlander | Navigation Manual - Page 203
AUDIO/VIDEO SYSTEM D Unit D Display (Page 1) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 Turning on the DVD mode Skipping to the desired chapter Playing/pausing a disc Turning on or off the operation switches on the display Selecting a switch Inputting the selected switch - 2013 Toyota Highlander | Navigation Manual - Page 204
screen. For the operation of the menu screen, see the separate manual for the DVD disc. (d) Returning to the previous screen Select "Return" to return Changing the audio language Changing the subtitle language Changing the angle INFORMATION To operate from the front audio system, see "- DVD player - 2013 Toyota Highlander | Navigation Manual - Page 205
AUDIO/VIDEO SYSTEM (e) Searching for a title (g) Changing the audio language Push or select "Search" to display the screen to search for a title. Select the title number, and push "ENT" to input it. Select "Back" to return to the previous screen. (f) Changing the subtitle language Push or select - 2013 Toyota Highlander | Navigation Manual - Page 206
code is not set properly. DVD ERROR: Indicates that there is a problem inside the player. Eject the disc. Set the disc again. If the malfunction still exists, take the vehicle to your Toyota dealer. DVD VIDEO DISCS This DVD player conforms to NTSC color TV formats. The DVD video disc conforming to - 2013 Toyota Highlander | Navigation Manual - Page 207
rated movie can be played. Level 8: All types of the DVD video discs can be played. Multi−angle feature: You can enjoy the same scene at different angles. Multi−language feature: You can select a language of the subtitle and audio. Region codes: The region codes are provided on DVD players and DVD - 2013 Toyota Highlander | Navigation Manual - Page 208
AUDIO/VIDEO SYSTEM - Using the DVD player (video CD) D Remote controller D Unit 1 2 3 4 5 6 7 8 9 Selecting a switch Selecting a chapter Playing/pausing a disc Reversing a disc Displaying operation switches Inputting the selected switch Fast forwarding a disc Stopping a disc Changing the initial - 2013 Toyota Highlander | Navigation Manual - Page 209
the next page screen (with the disc menu displayed) Changing to a multiplex transmission 8 9 10 11 Displaying to page 1 Reversing a disc Pausing the disc/canceling the pause Fast forwarding a disc INFORMATION To operate from the front audio system, see "- DVD player operation" on page 187. 233 - 2013 Toyota Highlander | Navigation Manual - Page 210
AUDIO/VIDEO SYSTEM - Using the DVD player (audio CD/CD text) D Selecting a disc menu number Select "Select Number" to display the disc menu and scan play Select "RPT", "RAND" or "SCAN" again. 2 1 INFORMATION To operate from the front audio system, see "- DVD player operation" on page 187. 234 - 2013 Toyota Highlander | Navigation Manual - Page 211
AUDIO/VIDEO SYSTEM - Using the DVD player (MP3 discs) D Using the control screen D Repeat play Repeat a file Select "RPT". Repeat all Search playback 4 Displaying file information 5 Selecting folder INFORMATION To operate from the front audio system, see "- DVD player operation" on page 187. 235 - 2013 Toyota Highlander | Navigation Manual - Page 212
connect the audio source to the A/V input port. Open the cover. The A/V input port is composed of 3 input ports. Yellow: Image input port White: Left channel audio input port Red: Right channel audio input port The rear seat entertainment system plays videos and sound when audio−video equipment is - 2013 Toyota Highlander | Navigation Manual - Page 213
AUDIO/VIDEO SYSTEM - Changing the initial setting D Changing the audio language Push or select "Set Up" to display the initial setting screen. The following initialization can be changed here. D "Audio Language" D "Subtitle Language" D "DVD Language" D "Angle Mark" D "Parental Lock" Select "Audio - 2013 Toyota Highlander | Navigation Manual - Page 214
AUDIO/VIDEO SYSTEM D Changing the subtitle language D Changing the DVD language Select "Subtitle Language". Select the language you want to read, and push "ENT" to input it. Select "DVD Language". Select the language you want to read and push "ENT" to input it. Select "Others" if you cannot - 2013 Toyota Highlander | Navigation Manual - Page 215
AUDIO/VIDEO SYSTEM D Turning on or off the angle mark The angle mark can be turned on to be effective. Select "Parental Lock". Enter the password and push "ENT". The setting cannot be changed unless the password is entered. When you forget the password, initialize the password. (See page 240.) - 2013 Toyota Highlander | Navigation Manual - Page 216
AUDIO/VIDEO SYSTEM D Setting the display mode D Adjusting the screen Push . Select the brightness, contrast, tone or colPushing changes the display modes . Push "ENT" to input it. Brightness, contrast, tone and color adjustment "Brightness" "+": Brightens the screen. "Brightness" "−": Darkens the - 2013 Toyota Highlander | Navigation Manual - Page 217
symptoms may occur. D The rear seat entertainment system control will not function properly. dealer. D Dispose of used batteries according to the local laws. 1. Remove the cover. CAUTION Removed battery and other parts: D Keep away from children. D These parts are small and if swallowed by a child - 2013 Toyota Highlander | Navigation Manual - Page 218
into the CD changer or DVD player. INFORMATION The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. RADIO RECEPTION Usually, a problem with radio reception does not - 2013 Toyota Highlander | Navigation Manual - Page 219
AUDIO/VIDEO SYSTEM XMr Cargo loaded on the roof luggage carrier, especially metal objects, may differences between models or software versions etc., some models listed above might be incompatible with this system. iPod 4th generation and earlier models are not compatible with this system. iPhone, - 2013 Toyota Highlander | Navigation Manual - Page 220
AUDIO/VIDEO SYSTEM CARING FOR YOUR CD CHANGER, DVD PLAYER AND DISCS D Your CD changer is intended for use with 4.7 in. (12 cm) discs only. D Extremely high temperatures can keep your CD changer and DVD player from working. On hot days, use the air conditioning to cool the vehicle interior before - 2013 Toyota Highlander | Navigation Manual - Page 221
AUDIO/VIDEO SYSTEM Audio CDs 6U5B93X DVD video discs " Special shaped discs Video CDs DVD player D Use only discs marked as shown above. The following products may not be playable on your player. SACD Copy−protected CD CD−ROM DVD−R DVD+R DVD−RW DVD+RW DVD−ROM DVD−RAM DVD−Audio 6U5B95X " - 2013 Toyota Highlander | Navigation Manual - Page 222
use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are - 2013 Toyota Highlander | Navigation Manual - Page 223
and with the Romeo and Joliet file system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back files with .mp3 or .wma name. D The emphasis function is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz. 247 - 2013 Toyota Highlander | Navigation Manual - Page 224
192 kbps Ver. 9 CBR-48 to 320 kbps WMA files for USB memory: Ver. 9-HIGH PROFILE 32 to 320 kbps, VBR (Variable Bit Rate) D The MP3/WMA player does not play back MP3/WMA files from discs recorder using packet write data transfer (UDF format). Discs should be recorded using "pre−mastering - 2013 Toyota Highlander | Navigation Manual - Page 225
seat entertainment system)-It is possible to play up to 253 folders on one disc. D MP3/WMA player (front audio system)-It is possible to play up to 192 folders or 255 files on one disc. D USB memory player- It is possible to play up to 999 folders or 255 files per folder. D The order changes - 2013 Toyota Highlander | Navigation Manual - Page 226
AUDIO/VIDEO SYSTEM CD−R and CD−RW discs D CD−R/CD−RW discs that have not been subject to the "finalizing process" (a process that allows discs to be played on a conventional CD player) cannot be played. D It may not be possible to play CD− R/CD−RW discs recorded on a music CD recorder or a personal - 2013 Toyota Highlander | Navigation Manual - Page 227
AUDIO/VIDEO SYSTEM m3u- Playlists created using "WINAMP" software have a playlist file extension (.m3u). MP3- MP3 is an audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on - 2013 Toyota Highlander | Navigation Manual - Page 228
AUDIO/VIDEO SYSTEM 252 - 2013 Toyota Highlander | Navigation Manual - Page 229
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM 7 D Rear view monitor system ...254 253 - 2013 Toyota Highlander | Navigation Manual - Page 230
SYSTEM Rear view monitor system The rear view monitor system assists the driver engine switch is in "ON" position. If you move the shift lever out of the "R" position, the screen returns to the previous screen. Operating another function of the navigation system the system when the back door is open - 2013 Toyota Highlander | Navigation Manual - Page 231
Doing so may result in the camera malfunctioning. When replacing the tires, please consult your Toyota dealer If you replace the tires, the area displayed on the screen may change. INFORMATION If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets, snow, or mud adhere - 2013 Toyota Highlander | Navigation Manual - Page 232
REAR VIEW MONITOR SYSTEM D Area displayed on screen Image is displayed approximately level on screen. The area displayed on the screen may vary according to vehicle orientation or road conditions. On screen Corners of bumper The area detected by the camera is limited. The camera does not detect - 2013 Toyota Highlander | Navigation Manual - Page 233
off the vehicle body) is picked up by the camera; when transmitted by the camera, the light source appears to have a vertical streak above and below it. When the camera is used under fluorescent lights, sodium lights, or mercury lights etc., the lights and the illuminated areas may appear to - 2013 Toyota Highlander | Navigation Manual - Page 234
REAR VIEW MONITOR SYSTEM 258 - 2013 Toyota Highlander | Navigation Manual - Page 235
D Clock settings ...265 (Used for changing time zones and the on/off settings of daylight saving time.) D Voice settings ...267 (Voice guidance can be set.) D Navigation settings ...269 ("Home" and "Preset Destinations" can be set and edited.) D Detailed navigation settings ...269 (Average cruising - 2013 Toyota Highlander | Navigation Manual - Page 236
be set to "On" or "Off". (See "D Rear system lock (with rear seat entertainment system)" on page 262.) * : Vehicles with rear seat entertainment system "On" or "Off" can be selected to sound beeps. "On" or "Off" can be selected for automatic screen changes from the audio screen to the map. When "On - 2013 Toyota Highlander | Navigation Manual - Page 237
SETUP No. 5 Function Line color can be changed. (See "D Selecting the line color" on page 262.) Keyboard layout can be changed. (See "D Selecting a keyboard layout" on page 263.) Distance unit can be changed. (See "D Unit of measurement" on page 263.) The personal data can be deleted. (See "D - 2013 Toyota Highlander | Navigation Manual - Page 238
with the rear seat entertainment system, the rear seat entertainment system can be locked to prevent rear passengers from operating the entertainment system. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. D Selecting the line color Line color can be changed. 1. Push the - 2013 Toyota Highlander | Navigation Manual - Page 239
to display page 2 of the D Selecting a keyboard layout Keyboard layout can be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" "Kilometer" or "Mile". 5. Touch "Save". INFORMATION This function is available only in English or Spanish. To switch language, see "D Selecting a - 2013 Toyota Highlander | Navigation Manual - Page 240
Maintenance information "off" setting D Address book D Areas to avoid D Previous points D Route trace D Phonebook data D Call history data D Speed dial data D Voice tag data D Bluetoothr phone data D Phone volume setting D Details phone setting This function is available only when the vehicle is not - 2013 Toyota Highlander | Navigation Manual - Page 241
" screen. Then touch to display page 2 of the Used for changing time zones and the on/ off settings of daylight saving time. "General Settings" screen. 1. Push the "SETUP" button. 3. Touch "Delete Personal Data". 2. Touch "Clock". 4. Touch "Delete". 5. Touch "Yes". 3. Touch the items to be set - 2013 Toyota Highlander | Navigation Manual - Page 242
time zone can be selected and GMT can be set. 1. Push the "SETUP" button. 2. Touch "Clock" on the "Setup" screen. On this screen, the following functions can be performed. No. 1 2 Function Time zone can be changed. (See "D Time zone" on page 266.) "On" or "Off" can be selected for daylight savings - 2013 Toyota Highlander | Navigation Manual - Page 243
during route guidance can be set to "On" or "Off". Voice guidance during audio system use can be set to "On" or "Off". Voice recognition talkback can be set "On" or "Off". When "On" is selected, the speech command system can be operated without pressing the talk switch more than once. When using the - 2013 Toyota Highlander | Navigation Manual - Page 244
congestion information through voice guidance while being guided to your destination. To turn the " available only in English. To select English, see "D Selecting a language" on page 261. D When the "Traffic Information" indicator is dimmed, "Auto Avoid Traffic", "Traffic Voice Guidance" and "Show - 2013 Toyota Highlander | Navigation Manual - Page 245
page 103.) Sets preset destinations (See page 105.) Sets address book (See page 108.) Sets area to avoid (See page 114.) Deletes previous destinations (See page 119.) Detailed navigation settings (See page 269.) 1. Push the "SETUP" button. 2. Touch "Navi.". 3. Touch "Detailed Navi. Settings". 269 - 2013 Toyota Highlander | Navigation Manual - Page 246
SETUP SCREENS FOR NAVIGATION SETTINGS 4. Touch the items to be set. 5. Touch "Save". On this screen, the following functions can be performed. No. 1 Function Average cruising speed can be - 2013 Toyota Highlander | Navigation Manual - Page 247
adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. (See "D Current position/ tire change calibration" on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. 7 8 9 4. Touch "Driving Speeds". 5. Touch or to - 2013 Toyota Highlander | Navigation Manual - Page 248
that is calculated based on the selected changes to another route to avoid heavy congestion. To turn the "Audio Avoid Traffic" on: 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. 4. Touch "On" of the "Auto - 2013 Toyota Highlander | Navigation Manual - Page 249
Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. 4. Select "On" of the "Show Free Flowing Traffic". 5. Touch "Save". INFORMATION When the "Traffic Information" indicator is dimmed, "Auto Avoid Traffic", "Traffic Voice Guidance" and "Show Free Flowing Traffic" will not operate - 2013 Toyota Highlander | Navigation Manual - Page 250
SETUP D POI category change (Select POI icons) Select from among the 6 icons "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. Then touch to display page 2 of the 6. Touch the desired group. If the desired POI category - 2013 Toyota Highlander | Navigation Manual - Page 251
on the "Navigation Settings" screen. Then touch to display page 2 of the D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the accuracy of a current vehicle position, see "Limitations of the navigation system" on page 332. 275 - 2013 Toyota Highlander | Navigation Manual - Page 252
SETUP POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 4. Touch either the or to ad- just the direction of the - 2013 Toyota Highlander | Navigation Manual - Page 253
on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. Then touch to display page 2 of the "Detailed Navi. Settings" screen. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick - 2013 Toyota Highlander | Navigation Manual - Page 254
- When the "Pop−up Information" is turned off, the following messages will not be displayed. "Telephone settings" can be changed on the "Phone settings" screen. This message appears when the system is in the POI mode and the map scale is over 0.5 miles (1 km). 1. Push the "SETUP" button. The - 2013 Toyota Highlander | Navigation Manual - Page 255
Touch "OK". D Ring volume setting 1. Touch "Ring Volume". 2. Change each setting according to the following procedures. 3. When you complete all settings , touch "Save". Automatic volume settings for high speed The system will automatically increase the volume by one step up when the speed - 2013 Toyota Highlander | Navigation Manual - Page 256
SETUP - Manage phone D Initializing the settings You can initialize the settings. 1. Touch "Default". "Manage phone" is accessed from the "Connect Phone" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 2. Touch "Yes". 3. Touch "Manage Phone". Please refer to the following pages for each - 2013 Toyota Highlander | Navigation Manual - Page 257
1. Touch "(add new)" to register your cellular phone to the system. 3. When the connection is completed, this screen is displayed. displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". - 2013 Toyota Highlander | Navigation Manual - Page 258
SETUP When another Bluetoothr device is connected You can also register a new Bluetoothr phone in the following way. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Manage Phone". When another Bluetoothr device is currently connected, this screen is displayed. If you want to disconnect it - 2013 Toyota Highlander | Navigation Manual - Page 259
4 numbers. "(add new)" is displayed when you have not registered a Bluetoothr phone yet. Although you can register up to 4 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. 1. Select the phone to connect. The Bluetoothr mark is displayed when you connect the phone - 2013 Toyota Highlander | Navigation Manual - Page 260
SETUP When you connect the phone while Bluetoothr audio is playing 2. The "Connect Bluetooth*" screen is displayed. This screen is displayed, and the Bluetoothr audio will stop temporarily. When another Bluetoothr device is connected 3. When the result message is - 2013 Toyota Highlander | Navigation Manual - Page 261
phone which is displayed on the screen. You can change it into a desired name. If you change a device name, the name registered in your cellular phone is not changed. "Device Address" ...The address peculiar to the system. You cannot change it. If you have registered two Bluetoothr phones with - 2013 Toyota Highlander | Navigation Manual - Page 262
SETUP 3. Select the phone to edit. 5. Use the software keyboard to input the device name. 4. This screen is displayed. If you want to change the device name, touch "Edit". 6. Confirm the device name and touch "OK". 286 - 2013 Toyota Highlander | Navigation Manual - Page 263
SETUP D Deleting a Bluetoothr phone 1. Touch "Options". 3. Select the desired phone or touch "Select All", then touch "Delete". You can select multiple phones and delete them at the same time. 2. Touch "Remove Phones". 4. Touch "Yes". INFORMATION When you delete a Bluetoothr phone, the - 2013 Toyota Highlander | Navigation Manual - Page 264
Phone" and "Handsfree Power Off" (On). The operating procedure is similar to other voice recognition. (For the operation of voice recognition, see "Speech command system" on page 44.) When you select the command of "Add New Phone", you must carry out the following operation on the screen. 3. Touch - 2013 Toyota Highlander | Navigation Manual - Page 265
SETUP - Setting the phonebook "Setting the phonebook" is accessed from the "Contacts" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". You can also display the "Contacts" screen in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". - 2013 Toyota Highlander | Navigation Manual - Page 266
. Transfer it while the engine is running. 3. Transfer the phonebook data to the system using the Bluetoothr phone. system. When you have touched "Replace Contacts": If your cellular phone does not support PBAP or OPP service, you can not use this function. If your phone supports PBAP service - 2013 Toyota Highlander | Navigation Manual - Page 267
SETUP When another Bluetoothr device is connected 4. In case that you have touched "Add Contacts", this screen is displayed. If you want to transfer another phonebook, touch "Yes". When another Bluetoothr device is currently connected, this screen is displayed. If you want to disconnect it, touch - 2013 Toyota Highlander | Navigation Manual - Page 268
SETUP D Registering the phonebook data You can register the phonebook data. Up to 3 numbers per person can be registered. 1. Touch "New Contact". 3. Input the phone number and touch "OK". If you want to use the tone signal after the phone number, input the tone signal too. 2. Use the software - 2013 Toyota Highlander | Navigation Manual - Page 269
SETUP D Editing the phonebook data You can register the phone number in "Phone#1", "Phone#2" and "Phone#3" separately. 5. When two or less numbers in total are registered to this contact, this screen is displayed. When you want to add a number to this contact, touch "Yes". 1. Touch "Edit Contacts - 2013 Toyota Highlander | Navigation Manual - Page 270
SETUP You can also display the "Edit Contact" screen in the following ways. From "Contact Data" screen 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 3. Touch "Edit" for the desired name or number. 4. Edit the name or the number. ( - 2013 Toyota Highlander | Navigation Manual - Page 271
Select the desired number from the list. D Deleting the phonebook data You can delete the data. When you release your car, delete all your data on the system. 1. Touch "Delete Contacts". 5. Touch "Add Contact" or "Update Contact". 6. In case that you have touched "Update Contact", this screen is - 2013 Toyota Highlander | Navigation Manual - Page 272
SETUP You can also delete it in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 3. Touch "Yes". 5. Touch "Options". 6. Touch "Delete Contact". 296 - 2013 Toyota Highlander | Navigation Manual - Page 273
SETUP - Speed dials setting "Speed dials setting" is accessed from the "Speed Dials" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". 7. Touch "Yes". INFORMATION When you delete a Bluetoothr phone, the phonebook data will be deleted at the same time. 4. Touch "Manage - 2013 Toyota Highlander | Navigation Manual - Page 274
SETUP You can also display the "Speed Dials" screen in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Speed Dials". D Registering the speed dial You can register the desired phone number from phonebook. Up to 18 numbers per phone can be registered. 1. Touch "New - 2013 Toyota Highlander | Navigation Manual - Page 275
SETUP 3. Touch the desired phone number. 5. If you select a touch−screen button you registered before, this screen is displayed. Touch "Yes" if you want to replace it. 4. Touch the touch−screen button you want to register in. 6. When this screen is displayed, the operation is complete. 299 - 2013 Toyota Highlander | Navigation Manual - Page 276
SETUP You can also register the speed dial in the following ways. From "Speed Dial" screen 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Speed Dials". 6. Select the data you want to register. 4. Touch "(add new)". 7. Touch the desired phone number. 5. Touch "Yes" to set new speed - 2013 Toyota Highlander | Navigation Manual - Page 277
SETUP From "Contact Data" screen 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 5. Touch "Options". - 2013 Toyota Highlander | Navigation Manual - Page 278
SETUP D Editing the speed dial You can edit the speed dial. 4. Use the software keyboard to input the name. 1. Touch "Edit Speed Dials". 5. Touch "Save". 2. Touch the touch−screen button you want to edit. 3. Touch "Edit". 302 - 2013 Toyota Highlander | Navigation Manual - Page 279
SETUP D Deleting the speed dial You can delete the speed dial. 3. Touch "Yes". 1. Touch "Delete Speed Dials". 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 303 - 2013 Toyota Highlander | Navigation Manual - Page 280
SETUP - Deleting call history You can delete the call history. 1. Touch "Delete Call History". 3. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 2. Select the desired history to delete. 4. Touch "Yes". 304 - 2013 Toyota Highlander | Navigation Manual - Page 281
" button. You can similarly operate other call history. Please refer to the following pages for each setting. When recording a voice tag, do so in a quiet area. 305 - 2013 Toyota Highlander | Navigation Manual - Page 282
SETUP You can also display "Voice Tags" screen in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". D Registering the voice tag You can register a voice tag for up to 20 numbers. 1. Touch "New Voice Tag". 4. Touch "Options". 2. Select the data you want to - 2013 Toyota Highlander | Navigation Manual - Page 283
Play" to play the voice tag. When you complete the voice tag registration, touch "OK". INFORMATION When you use the voice tag, do not change the language setting from the language setting used when registering. If they are different, the voice recognition can't recognize the voice tag that you have - 2013 Toyota Highlander | Navigation Manual - Page 284
SETUP D Editing the voice tag 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 1. Touch "Edit Voice Tags". 2. Select the data you want to edit. 3. This screen is displayed. The following operations are the same as - 2013 Toyota Highlander | Navigation Manual - Page 285
SETUP - Bluetoothr D Deleting the voice tag You can confirm and change the Bluetoothr settings. 1. Push the "SETUP" button. 2. Touch "Phone". 1. Touch "Delete Voice Tags". 3. Touch "Bluetooth*". 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data - 2013 Toyota Highlander | Navigation Manual - Page 286
to the following procedures. Changing the handsfree power The "Handsfree Power" display shows the following state. When "Handsfree Power" is "On": Vehicles with smart key system- The Bluetoothr phone is automatically connected when you turn the ignition to ACCESSORY or IGNITION ON mode. Vehicles - 2013 Toyota Highlander | Navigation Manual - Page 287
SETUP 1. Touch "Handsfree Power". 3. Touch "Save". In case that the state of "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. When you connect the phone while Bluetoothr audio is playing 2. Touch "On" or "Off". This screen is - 2013 Toyota Highlander | Navigation Manual - Page 288
software keyboard to input the device name. 2. Input a passcode and touch "OK". INFORMATION The device names are common Bluetoothr audio and Bluetoothr phone. If you change the device name of the phone, the device name of the audio will - 2013 Toyota Highlander | Navigation Manual - Page 289
is playing while 1. Touch "Default". This screen is displayed, and the Bluetoothr audio will stop temporarily. 2. Touch "Yes". If the state of "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. 313 - 2013 Toyota Highlander | Navigation Manual - Page 290
SETUP - Details You can do the detail settings. 1. Push the "SETUP" button. 2. Touch "Phone". D Incoming call display You can select the method of the incoming call display. 3. Touch "Details". 1. Touch Mode". 4. Do each setting according to the following procedures. 5. When you complete each - 2013 Toyota Highlander | Navigation Manual - Page 291
displayed on the upper side of the screen. You can only operate the steering switch. Vehicles with smart key system- When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode and the Bluetoothr is automatically connected, the connection check is displayed. Vehicles without smart key - 2013 Toyota Highlander | Navigation Manual - Page 292
SETUP D Initializing the settings You can initialize the settings. 1. Touch "Display Phone Status". 1. Touch "Default". 2. Touch "On" or "Off". 2. Touch "Yes". 316 - 2013 Toyota Highlander | Navigation Manual - Page 293
when you choose the portable player. 1. Push the "SETUP" button. U10003GS U10025GS 2. Touch "Audio" on "Setup" screen. 4. Select desired portable player and then touch "OK". Although you can register up to two portable players in the system, only one portable player can function at a time. 317 - 2013 Toyota Highlander | Navigation Manual - Page 294
You can see or change the information of the portable player on the system. "Device Name" ...The name of Bluetoothr portable player which is displayed on the screen. You can change it into a desired name. "Device Address" ...The address peculiar to the system. You cannot change it. If you have - 2013 Toyota Highlander | Navigation Manual - Page 295
" on "Audio Settings" screen. U10009GS 2. Touch "Register" of "Bluetooth∗ Audio" on "BT Audio Setting" screen. ∗: Bluetooth is a registered trademark of Bluetooth SIG, Inc. INFORMATION If the connection method is set to "From Portable Player", "Auto Bluetooth∗ Connect" cannot be selected. 319 - 2013 Toyota Highlander | Navigation Manual - Page 296
passcode displayed on the screen into the portable player. For the operation of the portable player, see the manual that comes with it. If you want complete, this screen is displayed. You do not need to enter the portable player in case of using the same one. U10012GS When this screen is displayed - 2013 Toyota Highlander | Navigation Manual - Page 297
is in use, this screen will appear. Touch "Yes". The system will disconnect the portable player and remove it. ∗: Bluetooth is a registered trademark of Bluetooth SIG, Inc. U10014GS 2. Select the portable player you want to delete and touch "OK". U10015GS 3. Touch "Yes" to unregister the selected - 2013 Toyota Highlander | Navigation Manual - Page 298
leave the Bluetoothr portable player in a condition where connection can be established. The "Auto Bluetooth∗ Connect" cannot be selected if the connection method is set to "From Portable Player". Vehicles with smart key system- When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode - 2013 Toyota Highlander | Navigation Manual - Page 299
the passcode The passcode for registering your portable player on the system can be changed. You can change this to 4 to 8 digit number of your choice. The default is "0000". (d) Changing the device name You can change a device name. Even if you change a device name, the name registered in your - 2013 Toyota Highlander | Navigation Manual - Page 300
SETUP Vehicle Settings - - Maintenance (e) Initializing the Bluetoothr audio settings You can initialize the settings. When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components. (See page 27.) U10023GS 1. Touch "Default" on " - 2013 Toyota Highlander | Navigation Manual - Page 301
. (See " (b) Dealer setting" on page 327.) "Reminder": When this button is touched, the indicator is illuminated. The system is set to give maintenance information with the "Information" screen. (See page 27.) When the vehicle needs to be serviced, the touch screen button color will change to orange - 2013 Toyota Highlander | Navigation Manual - Page 302
Brake pad": Replace brake pads "Wipers": Replace wiper blades "Coolant": Replace engine coolant "Brake oil": Replace brake fluid "Trans. fluid": Replace transmission fluid "Service , please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on driving or road - 2013 Toyota Highlander | Navigation Manual - Page 303
register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "SETUP" button. 2. Touch "Vehicle" on the "Setup" screen. 3. Touch "Maintenance" on the "Vehicle Settings" screen. 6. Touch "Edit" for the item you want to change. "Dealer": To - 2013 Toyota Highlander | Navigation Manual - Page 304
" or "Contact" D To edit "Location" 1. Touch "Edit" of "Dealer" or "Contact". 1. Touch "Edit" of "Location". 2. Enter the name using the alphanumeric keys. Up to 32 characters can be entered. 3. Touch "OK". The previous screen - 2013 Toyota Highlander | Navigation Manual - Page 305
SETUP D To edit "Phone #" (telephone number) 1. Touch "Edit" of "Phone #". 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 329 - 2013 Toyota Highlander | Navigation Manual - Page 306
SETUP 330 - 2013 Toyota Highlander | Navigation Manual - Page 307
APPENDIX SECTION APPENDIX 9 D Limitations of the navigation system ...332 D Map database information and updates ...334 Changing the map DVD−ROM ...343 331 - 2013 Toyota Highlander | Navigation Manual - Page 308
provides an accurate current vehicle position, normally using 4 or more satellites, and in some case 3 satellites. The GPS system has a certain level of inaccuracy. While the navigation system will compensate for this most of the time, occasional positioning errors of up to 300 feet (100 m) can and - 2013 Toyota Highlander | Navigation Manual - Page 309
reroute, the route guidance may not be available for the next turn to the right or left. D It may take a long time to operate auto reroute during high speed driving. In auto reroute, a detour route may be shown. D After auto reroute, the route may not be changed. D An unnecessary U−turn may be shown - 2013 Toyota Highlander | Navigation Manual - Page 310
information and updates - After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 277.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing tires that are larger or smaller than - 2013 Toyota Highlander | Navigation Manual - Page 311
PRODUCTS (COLLECTIVELY, THE "DATABASE"), USED IN THE NAVIGATION SYSTEM. BY USING THE NAVIGATION SYSTEM AND THE DATABASE, YOU ACCEPT AND AGREE TO BE or reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system for which - 2013 Toyota Highlander | Navigation Manual - Page 312
DATABASE, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS INTERRUPTION OR THE information due to the passage of time, changing circumstances, and due to the nature of the ; road slope or grade; bridge height, weight or other limits; road or traffic conditions; - 2013 Toyota Highlander | Navigation Manual - Page 313
APPENDIX U.S. GOVERNMENT RIGHTS If you are an agency, department, or other entity of the United States Government, or funded in whole or in part by the United States Government, then use, duplication, reproduction, release, modification, disclosure or transfer of this commercial product and - 2013 Toyota Highlander | Navigation Manual - Page 314
USING THIS NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in , non−commercial purposes, and not for service bureau, time−sharing or other similar purposes . You may not decompile, disassemble or reverse engineer any portion of this information, and may not - 2013 Toyota Highlander | Navigation Manual - Page 315
THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF DENSO OR ITS LICENSORS HAVE BEEN ADVISED OF liability, loss, injury (including injuries resulting in death), demand, action, cost, expense, or claim of any kind or character, including but not limited - 2013 Toyota Highlander | Navigation Manual - Page 316
ServiceR to publish and sell ZIP+4R information. ©United States Postal ServiceR 2010. Prices are not established, controlled or approved by the United States Postal ServiceR navigation system for the solely personal, non−commercial purposes for which you were licensed, and not for service engineer - 2013 Toyota Highlander | Navigation Manual - Page 317
systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle navigation due to the passage of time, changing circumstances, sources used and the , WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF DENSO OR ITS LICENSORS - 2013 Toyota Highlander | Navigation Manual - Page 318
except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations. Entire Agreement provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the - 2013 Toyota Highlander | Navigation Manual - Page 319
on some areas in this system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and pricing of an update. 1. Push the "INFO/PHONE" button. 2. Touch "Map Data". 3. Touch " DVD". 343 - 2013 Toyota Highlander | Navigation Manual - Page 320
place anything on the opened display, as such items may be thrown about and possibly injure people in the vehicle during sudden braking or in an accident a new map DVD−ROM with the label side up. NOTICE D Do not obstruct the display while it is moving. It could damage your navigation system. D If a - 2013 Toyota Highlander | Navigation Manual - Page 321
APPENDIX D To confirm the database version and disc coverage area D Certification For vehicles sold in Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept - 2013 Toyota Highlander | Navigation Manual - Page 322
APPENDIX 346 - 2013 Toyota Highlander | Navigation Manual - Page 323
screen (DVD player) ...240 Alphabet key ...28 AM button ...146 Angle mark ...203,237 Areas to avoid ...115 Arrow screen ...39,80 ASL ...152 Audio button ...22,317 Audio language ...203,237 Audio settings ...317 Audio/video remote controls ...218 Audio/video system ...145 Audio/video system operating - 2013 Toyota Highlander | Navigation Manual - Page 324
...41 Dual map screen ...39,41 DVD controls ...199 DVD language ...203,237 DVD player operation ...187 DVD settings ...198 E Edit "Dealer" or "Contact" ...328 Edit "Location" ...328 Edit "Phone #" ...329 Edit route ...75 Editing address book entries ...110 Editing area to avoid ...116 Editing home - 2013 Toyota Highlander | Navigation Manual - Page 325
Guiding the route ...16 K Keyboard layout ...260 L Language ...260 Last 5 cities ...57,63 Limitations of the navigation system ...332 Line color information and updates ...334 Map DVD ...345 Map DVD−ROM ...343 Map icons ...44 player malfunctions ...178,210 Important information about this manual - 2013 Toyota Highlander | Navigation Manual - Page 326
of areas to be avoided ...117 Navi. button ...22,102,269 Navigation settings ...102,269 Navigation settings screen ...102,269 Navigation system function 157 Rear seat entertainment system (DVD player) ...221 Rear system lock ...260,262 Rear view monitor system ...254 Rear view monitor system camera - 2013 Toyota Highlander | Navigation Manual - Page 327
button ...10,39 Screen for navigation settings ...270 Screen for voice settings ...267 Screen layout function ...275 Screen off ...31 Screen scroll operation ...34 Screen size ...153 Screens for clock settings ...266 Screens for general settings ...260 Search area ...52 Search by "Address Book - 2013 Toyota Highlander | Navigation Manual - Page 328
settings ...278 Telephone switch ...123 Time zone ...266 Tire change calibration ...275,277 Tone ...31,152 Tone and balance ... information ...242 USB memory operation ...211 USB port ...155 Using your audio/video system ...147 V Vehicle button ...22,324 Vehicle settings ...324 Video CD controls - 2013 Toyota Highlander | Navigation Manual - Page 329
explains the operation of the Navigation System. Please read this manual carefully to ensure proper use. Keep this manual in your vehicle at all times. The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the - 2013 Toyota Highlander | Navigation Manual - Page 330
Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 332 through 333. 2 - 2013 Toyota Highlander | Navigation Manual - Page 331
it and become thoroughly familiar with it. Read the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable - 2013 Toyota Highlander | Navigation Manual - Page 332
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2013 Toyota Highlander | Navigation Manual - Page 333
Quick guide - - Overview buttons and guidance screen No. 1 2 Name North−up or heading−up symbol Scale indicator "MAP/VOICE" button "DEST" button Zoom out button "DISP" button Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map orientation. - 2013 Toyota Highlander | Navigation Manual - Page 334
or the cursor position as a memory point. Touch this button to change the route. Touch this button to browse information about guidance route, the vehicle is receiving signals from the GPS, this mark is displayed. Page 23, 127, 143, 343, 345 8 275 9 10 "Mark" "Route" "Show on Map" 35 84, 86 92, - 2013 Toyota Highlander | Navigation Manual - Page 335
- Registering home 1 Push the "DEST" button. U0027FC 2 Touch "Go Home". If home has not been registered, you can register it by touching "Go Home". 3 Touch "Yes". 4 There are 4 different methods to search your home. See "Destination search" on page 52. 7 - 2013 Toyota Highlander | Navigation Manual - Page 336
. 6 Touch "OK". Registration of home is complete. You can also register home by touching the "SETUP" button. (See " (a) Registering home" on page 103.) You can change the name, location, phone number and icon. (See " (b) Editing home" on page 104.) 8 - 2013 Toyota Highlander | Navigation Manual - Page 337
- Registering preset destinations 1 Push the "DEST" button. U0027FC 2 Touch one of the preset destination buttons. You can set a preset destination to any preset destination button that has not yet been set. 3 Touch "Yes". 4 There are 4 different methods to search preset destinations. See " - 2013 Toyota Highlander | Navigation Manual - Page 338
is complete. You can also register preset destinations by touching the "SETUP" button. (See " (a) Registering preset destinations" on page 106.) You can change the name, location, phone number and icon. (See " (b) Editing preset destinations" on page 107.) The registered points can be used on the - 2013 Toyota Highlander | Navigation Manual - Page 339
- Operation flow: guiding the route 1 Push the "DEST" button. U0027FC 2 There are 10 different methods to search destinations. See "Destination search" on page 52. 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than - 2013 Toyota Highlander | Navigation Manual - Page 340
" can be used if your home has been registered. (To register "Home", see " (a) Registering home" on page 103.) 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than the one recommended can also be selected. (See "Starting - 2013 Toyota Highlander | Navigation Manual - Page 341
2 "Point of Interest" Select one of the many Points of Interest that have already been stored in the system's database...59 3 "Previous Destinations" A destination can One of the four categories of emergency service points that are already stored in the system's database can be selected...66 5 13 - 2013 Toyota Highlander | Navigation Manual - Page 342
"Intersection & Freeway" The names of two intersecting streets or a freeway (interstate) entrance or exit can be entered. This is helpful if only the general vicinity, not the specific address, is known...67 9 "Map" A destination can be selected simply by touching the location on the displayed map - 2013 Toyota Highlander | Navigation Manual - Page 343
can be set. To display the "Setup" screen, push the "SETUP" button. "General" Settings are available for language selection, operation sounds, automatic screen change, etc...260 "Clock" Used for changing settings for time zones, daylight saving time, etc...265 3 "Voice" Voice guidance can be set - 2013 Toyota Highlander | Navigation Manual - Page 344
, push the "INFO/PHONE" button. 1 "Phone" To view hands free phone information...127 2 "Map Data" Displays information regarding the map data disc version or coverage area...343 3 "Calendar" To view calendar...143 16 - 2013 Toyota Highlander | Navigation Manual - Page 345
17