2013 Toyota Land Cruiser Owners Manual - Page 30

1-2. Opening, closing and locking the doors n Switching the door unlock function It is possible to set which doors the entry function unlocks. STEP 1 Turn the "ENGINE START STOP" switch OFF. STEP 2 When the indicator on the key surface is turned off, press and hold or the key. for approximately 5 seconds while pressing on 1 Before driving The setting changes each time an operation is preformed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat STEP 2 .) Multi-information display Unlocking function Hold the driver's door handle to unlock only the driver's door. Beep Exterior: Beeps three times Interior: Pings once Hold either door handle to unlock all doors. Exterior: Beeps twice Interior: Pings once To prevent unintended triggering of the alarm, unlock the doors using the wireless remote control and open and close a door once after the setting have been changed. (If a door is not opened within 60 seconds after is pressed, the doors will be locked again and the alarm will automatically be set.) In case that the alarm is triggered, immediately stop the alarm.(→P. 105) 37 L/C200_U (OM60G36U)