2013 Toyota Land Cruiser Navigation Manual - Page 142

1. PHONE OPERATION TONE SIGNAL If a continuous tone signal is registered in a phonebook, this screen appears. (If not registered, "Send" and "Clear" are not displayed.) This can be operated while driving. INFORMATION 1 Confirm the number displayed on the screen and touch "Send". The number before marked sign will be sent. ● The continuous tone signal is the marked sign (p or w) and the number that follows the phone number. (e.g. 056133w0123p#1 ) ● When the "p" pause tone is used, after waiting 2 seconds the tone data up until the next pause tone will be automatically sent. When the "w" pause tone is used, the tone data up until the next pause tone will be automatically sent after user operation. ● This operation can be done when it is desirable to operate an answering machine or use a telephone service in a bank for example. The phone number and the code number in the phonebook can be registered. 4 PHONE BY VOICE RECOGNITION When "Clear" is touched, this function is finished and the normal tone screen appears. "Send Tones" can be operated by giving a command during a call. The operating procedure is similar to other voice recognition operations. (For the operation of voice recognition, see "VOICE COMMAND SYSTEM" on page 308.) To hang up the phone: Touch or press the wheel. switch on the steering 151 L/C200 (US) NAVI 60G58U 12.01.19 11:29