2013 Toyota Land Cruiser Navigation Manual - Page 199

1. AUDIO/VIDEO SYSTEM OPERATION CHANNEL CATEGORY SELECTING A CHANNEL Tune in the desired channel using one of the following methods. Preset tuning: Touch the channel selector screen button (1-6) or press the " " or " " button of "PRSE·TRACK" to listen to the desired channel. The selected screen button (1-6) is highlighted and its related information appears on the right side of the screen. To select a channel within the current category: Press and hold the " " or " " button of "PRST·TRACK". The radio will change up or down to a channel within the current channel category. 1 Touch either "TYPE " or " TYPE" to go to the next or previous category. PRESETTING A CHANNEL 1 2 Tune in the desired channel. Touch one of the left side screen buttons (1-6) and hold it until a beep is heard. This sets the frequency to the screen button. The channel number will be displayed in the screen button. To change the preset channel to a different one, follow the same procedure. To scan the currently selected channel category: Touch "SCAN". "SCAN" appears on the screen. The radio will find the next channel in the same channel category, stay there for a few seconds, and then scan again. To select a channel, touch "SCAN" again. 210 L/C200 (US) NAVI 60G58U 12.01.19 11:29