2013 Toyota Sequoia Navigation Manual - Page 112

1. PHONE OPERATION 3. REGISTER A Bluetooth® PHONE To use the hands-free system, it is necessary to register a phone with the system. Once the phone has been registered, it is possible to make a handsfree call. If a Bluetooth® phone has not been registered yet, it is necessary to register it first according to the following procedure. A Bluetooth® phone cannot be registered while driving. See "REGISTERING A Bluetooth® DEVICE" on page 157 of additional registration when registering. For details about entering the passcode into the Bluetooth® device, see the manual that comes with it. Depending on the type of Bluetooth® phone being connected, it may be necessary to perform additional steps on the phone. A passcode is not required for SSP (Secure Simple Pairing) compatible Bluetooth® phones. Depending on the type of Bluetooth® phone being connected, a message confirming registration may be displayed on the Bluetooth® phone's screen. Respond and operate the Bluetooth® phone according to the confirmation message. To cancel the registration, touch "Cancel". If the Bluetooth® phone to be registered has a Bluetooth® audio function, this can be registered at the same time. 3 When this screen is displayed, input the passcode displayed on the screen into the phone. 1 Press the button or the on the steering wheel. switch 4 PHONE 2 Touch "Yes" to register a phone. 4 This screen will be displayed when registration is complete. If 5 Bluetooth® devices have already been registered, a registered device needs to be deleted. See " When 5 Bluetooth® devices have already been registered" on page 122. When using the same phone, it is not necessary to register it again. 121