3Com 2916-SFP User Guide - Page 124
Defining IGMP Snooping, Device > IGMP Snooping > Setup, IGMP Snooping Status, Select VLAN ID
UPC - 662705518893
View all 3Com 2916-SFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
124 CHAPTER 10: CONFIGURING IGMP SNOOPING Defining IGMP Snooping The IGMP Snooping Setup Page allows network managers to define IGMP Snooping parameters. The monitor users have read-only access to this page. 1 Click Device > IGMP Snooping > Setup. The IGMP Snooping Setup Page opens: Figure 68 IGMP Snooping Setup Page The IGMP Snooping Setup Page contains the following fields: ■ IGMP Snooping Status - Indicates if IGMP Snooping is enabled on the device. The possible field values are: ■ Disable - Indicates that IGMP Snooping is disabled on the device. This is the default value. ■ Enable - Indicates that IGMP Snooping is enabled on the device. ■ Select VLAN ID - Specifies the VLAN ID. ■ IGMP Status - Indicates if IGMP snooping is enabled on the VLAN. The possible field values are: ■ Disable - Disables IGMP Snooping on the VLAN. This is the default value. ■ Enable - Enables IGMP Snooping on the VLAN.