3Com 2916-SFP User Guide - Page 150
Viewing Bandwidth Settings, Device > QoS > Bandwidth > Summary, Interface, Ingress Rate Limit
UPC - 662705518893
View all 3Com 2916-SFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
150 CHAPTER 13: CONFIGURING QUALITY OF SERVICE Viewing Bandwidth The Bandwidth Summary Page displays bandwidth settings for a specified Settings interface. To view Bandwidth Settings: 1 Click Device > QoS > Bandwidth > Summary. The Bandwidth Summary Page opens: Figure 83 Bandwidth Summary Page The Bandwidth Summary Page contains the following fields: ■ Interface - Displays the interface for which rate limit and shaping parameters are defined. Ingress Rate Limit ■ Status - Indicates if rate limiting is defined on the interface. The possible field values are: ■ Enable - Enables ingress rate limiting on the interface. ■ Disable - Disables ingress rate limiting on the interface. ■ Rate Limit - Indicates the traffic limit for the port. The field range is 3,500-1,000,000 kbps per second.